Abstract:The Overhauser magnetometer is a scalar quantum magnetometer based on the dynamic nuclear polarization (DNP) effect in the Earth’s magnetic field. Sensitivity is a key technical specification reflecting the ability of instruments to sense small variations of the Earth’s magnetic field and is closely related to the signal-to-noise ratio (SNR) of the free induction decay (FID) signal. In this study, deuterated 15N TEMPONE radical is used in our sensor to obtain high DNP enhancement. The measured SNR of the FID signal is approximately 63/1, and the transverse relaxation time T2 is 2.68 s. The direct measurement method with a single instrument and the synchronous measurement method with two instruments are discussed for sensitivity estimation in time and frequency domains under different electromagnetic interference (EMI) environments and different time periods. For the first time, the correlation coefficient of the magnetic field measured by the two instruments is used to judge the degree of the influence of the environmental noise on the sensitivity estimation. The sensitivity evaluation in the field environment is successfully realized without electrical and magnetic shields. The direct measurement method is susceptible to EMI and cannot work in general electromagnetic environments, except it is sufficiently quiet. The synchronous measurement method has an excellent ability to remove most natural and artificial EMIs and can be used under noisy environments. Direct and synchronous experimental results show that the estimated sensitivity of the JOM-4S magnetometer is approximately 0.01 nT in time domain and approximately 0.01 nT/Hz in frequency domain at a 3 s cycling time. This study provides a low-cost, simple, and effective sensitivity estimation method, which is especially suitable for developers and users to estimate the performance of the instrument.

A normal coronary artery: what size is it?

Characterizing current noise of commercial constant-current sources by using of an optically-pumped rubidium atomic magnetometer

A Broadband NMR Magnetometer System with Field Searching and Automatic Tuning Function

Suppression of Current Source Noise with an Atomic Magnetometer

Study on the Sensitivity of Laser-Pumped Cesium Atomic Magnetometer

A High Sensitivity Laser-Pumped Cesium Magnetometer

Measuring magnetic field coil constants based on atomic magnetometry and fluxgate magnetometry

Low Noise Measurement Method Based on Differential Optical Interferometer for Cold Atom Experiments

A Multi-Pass Optically Pumped Rubidium Atomic Magnetometer with Free Induction Decay

Ultra-low Noise Bipolar Current Source for Ultracold Atom Magnetic System.

Gradiometry-free noise suppression in RF atomic magnetometers

Active Magnetic-Field Stabilization with Atomic Magnetometer

Free-induction-decay 4 He Magnetometer Using a Multipass Cell

A high-sensitivity push-pull magnetometer

Wide-range and Self-Locking Atomic Magnetometer Based on Free Spin Precession

Atomic Comagnetometer with a Closed-Loop Optically Aligned 87 Rb Dual-Frequency Oscillator

Low noise constant current source for bias dependent noise measurements

JOM-4S Overhauser Magnetometer and Sensitivity Estimation

A Cold Atom Radio-Frequency Magnetometer

Analysis and Suppression for Critical Optical Nonorthogonal Noise in SERF Comagnetometers

Noise Suppression of Nitrogen-Vacancy Magnetometer in Lock-in Detection Method by Using Common Mode Rejection