Abstract:Lithium metal and anode-free batteries has the potential to increase the energy density and specific energy of the batteries drastically. However, when regular electrolyte materials are tried for these concepts they are plagued with problems due to degradation of the electrolyte at the interface and processes like dendrite formation which leads to poor capacity retention.[1] A strategy to mitigate these problems is to use Solid Polymer Electrolytes (SPEs), as these have better stability towards lithium metal. In order to find appropriate chemistries to use in SPE-based cells it is important to investigate and understand their anode interface, as this is where the Solid Electrolyte Interphase (SEI) is created from the degradation products during cycling. This work investigates three polyethylene oxide (PEO)-based SPEs, using lithium tetrafluoroborate (LiBF 4 ), lithium bis(oxalate)borate (LiBOB), and lithium difluoro(oxalate)borate (LiDFOB) as the lithium conducting salts. The interfaces of these SPEs (PEO:LiBF 4 , PEO:LiBOB, and PEO:LiDFOB) was studied using Photo-Electron Spectroscopy (PES) with in situ lithium deposition, where lithium atoms are evaporated on top of the SPE film. The analysis of the core-level spectra before and after lithium deposition is compared to Ab Initio Molecular Dynamics (AIMD) simulations of the interface, where lithium atoms are gradually added during the simulation. These experimental and theoretical methods are meant to mimic the electrochemical plating of lithium at the lithium|SPE interface during charging of a lithium metal or anode-less cell. The interfaces of PEO:LiBOB and PEO:LiBF 4 show, among other compounds, polyethylene as a breakdown product at the interface. PEO:LiDFOB shows a much lesser degree of degradation compared to the other two systems. The degradation layer is however still effective at protecting the SPE from further breakdown, as PEO:LiDFOB has a relatively high capacity retention compared to PEO:LiBF 4 and PEO:LiBOB. Suggested is that the LiF provides a better electrochemical stability, while the boron and oxalate breakdown products provides a higher mechanical stability at the interface. [1] Huang WZ, Zhao CZ, Wu P, Yuan H, Feng WE, Liu ZY, Lu Y, Sun S, Fu ZH, Hu JK, Yang SJ. Anode‐Free Solid‐State Lithium Batteries: A Review. Advanced Energy Materials. 2022 Jul;12(26):2201044. Figure 1

Influence of Molecular Weight and Lithium Bis(trifluoromethanesulfonyl)imide on the Thermal Processability of Poly(ethylene oxide) for Solid-State Electrolytes

Promoting Ion and Heat Transfer of Solid Polymer Electrolytes by Tuning Polymer Chain Length and Salt Concentration

Influence of the Processing on the Ionic Conductivity of Solid-State Hybrid Electrolytes Based on Glass-Ceramic Particles Dispersed in PEO with LiTFSI

Effects of the Shapes of BaTiO3 Nanofillers on PEO-based Electrolytes for All-Solid-state Lithium-Ion Batteries

Effect of thermal pre‐compressing on ionic conductivity and mechanical properties of PEO‐based solid‐state electrolytes

Properties of the Interphase Formed between Argyrodite-Type Li6PS5Cl and Polymer-Based PEO10:LiTFSI

Organic Ionic Plastic Crystal-Poly(ethylene oxide) Solid Polymer Electrolytes: Application in All-Solid-State Lithium Batteries

Superior thermal conductivity of poly (ethylene oxide) for solid-state electrolytes: A molecular dynamics study

Investigation on the mechanical integrity of PEO-based polymer electrolyte in all-solid-state lithium batteries

An ionic liquid- and PEO-based ternary polymer electrolyte for lithium metal batteries: an advanced processing solvent-free approach for solid electrolyte processing

Tailored PEO/PEG-PPG Polymer Electrolyte for Solid-State Lithium-Ion Battery

Effects of lithium salts on PEO-based solid polymer electrolytes and their all-solid-state lithium-ion batteries

Conductivities and Transport Properties of Microporous Molecular Sieves Doped Composite Polymer Electrolyte Used for Lithium Polymer Battery

Interface Layer Formation In Solid Polymer Electrolyte Lithium Batteries: An Xps Study

Increasing the electrochemical stability window for polyethylene-oxide-based solid polymer electrolytes by understanding the affecting factors

Preparation and Electrochemical Performance of PEO Based Polymer Electrolyte Containing Pentaerythritol Tetrakis(2-methoxyethyl ether) and Lithium Methoxy Oligo(oxyethylene) sulfate

PEO kaolinite intercalation interface accelerates lithium-ion transfer for all-solid-state lithium metal batteries

(Best Poster Award - 1st Place) Characterisation of the Li Metal|Electrolyte Interface of PEO-Based SPEs with Borate Salts, Using in Situ Li Deposition PES Measurements Aided by AIMD Simulations

Novel PEO-based Solid Polymer Electrolyte with High Elasticity and High Ionic Conductivity for Room Temperature Lithium Metal Batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Crosslinked polytetrahydrofuran-based solid-state electrolytes with improved mechanical stability and electrochemical performance