Abstract:Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals often requires non-equilibrium processing routes, which typically limit the specimen size and require large energy budgets. In this study, multiple dopant elements in ternary Al alloys are deliberately selected to enable segregation to the grain boundary region and promote the formation of amorphous complexions. Three different fully dense bulk nanocrystalline Al alloys (Al-Mg-Y, Al-Fe-Y, and Al-Ni-Y) with small grain sizes were successfully fabricated using a simple powder metallurgy approach, with full densification connected directly to the onset of amorphous complexion formation. All the compositions demonstrate densities above 99% with grain sizes <60 nm following consolidation via hot pressing at 585 °C. The very fine grain structure results in excellent mechanical properties, as evidenced by nanoindentation hardness values in the range of 2.2-2.8 GPa. Detailed microstructural characterization verifies the segregation of all dopant species to grain boundaries as well as the formation of amorphous complexions, which suggests their influential role in aiding effective consolidation and endowing thermal stability in the alloys. Moreover, nanorods with a core-shell structure are also observed at the grain boundaries, which likely contribute to the stabilization of the grain structure while also strengthening the materials. Finally, intermetallic particles with sizes of hundreds of nanometers form in all systems. As a whole, the results presented here demonstrate a general alloy design strategy of segregation and boundary evolution pathway that enables the fabrication of multiple nanocrystalline Al alloys with hierarchical microstructures and improved performance.

A nanograins-attached and ultrathin Cu flake powder fabricated by high energy mechanical milling and dealloying

Nanophase And Ultrafine-Grained Powders Prepared By Mechanical Milling: Full Density Processing And Unusual Mechanical Behavior

Fabrication Of Nanostructural Aluminum Alloy Powder With Ball Milling Method

High-strength hierarchical-structured bulk nanoporous Cu prepared by dealloying and spark plasma sintering

Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy

A Novel Way for Fabricating Ultrafine Grained Cu-4.5 Vol% Al2O3 Composite with High Strength and Electrical Conductivity

Nanophase Fe Alloys Consolidated to Full Density from Mechanically Milled Powders

Powder Assembly & Alloying to CNT/Al–Cu–Mg Composites with Trimodal Grain Structure and Strength-Ductility Synergy

Design of an Efficient Flake Powder Metallurgy Route to Fabricate CNT/6061Al Composites

Nanocrystalline and ultrafine grained materials by mechanical alloying

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

High-strength CNT/Al-Zn-Mg-Cu Composites with Improved Ductility Achieved by Flake Powder Metallurgy Via Elemental Alloying

Mechanically Driven Alloying and Structural Evolution of Nanocrystalline Fe 60 Cu 40 Powder

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder

Synergism of Mechanical Milling and Dielectric Barrier Discharge Plasma on the Fabrication of Nano-Powders of Pure Metals and Tungsten Carbide

Enhanced Interfacial Bonding and Mechanical Properties in CNT/Al Composites Fabricated by Flake Powder Metallurgy

Fabrication of Nanoporous Metal by Selective Electrochemical Dealloying from Laser Cladding Cu-Mn Alloys

In-situ and Ex-Situ Synchrotron X-ray Diffraction Studies of Microstructural Length Scale Controlled Dealloying

Nanostructural features in nanoporous copper coatings fabricated by laser deposition

Formation of Micro-Nano Structure by Laser Deposition and Dealloying of Copper Alloy Layer on Macro-Component Surface

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation