The value of endoscopic sclerotherapy of esophageal varices.

N. Soehendra

1982-02-01

Abstract:

What problem does this paper attempt to address?

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Zusheng Chen,Heping Xu,Dongya Yang,Yingying Wang,Jun Zhu,F. Qiu,Wenling Wu

DOI: https://doi.org/10.1002/APP.35127

2012-04-15

Abstract:The waterborne polyurethane (PU) prepolymer was first prepared based on isophorone diisocyanate, polyether polyol (NJ-210), dimethylol propionic acid (DMPA), and hydroxyethyl methyl acrylate via in situ method. The crosslinked waterborne polyurethane-acrylate (PUA) dispersions were prepared with the different functional crosslinkers. The chemical structures, optical transparency, and thermal properties of PU and PUA were confirmed by Fourier transform infrared spectrometry, ultraviolet–visible spectrophotometry, and differential scanning calorimetry. Some physical properties of the aqueous dispersions such as viscosity, particle size, and surface tension were measured. Some mechanical performances and solvent resistance of PUA films were systemically investigated. The experimental results showed that the particle sizes of the crosslinked PUA aqueous dispersions were larger than the PU and increased from 57.3 to 254.4 nm. When the ratios of BA/St, BA/TPGDA, and BA/TMPTA were 70/30, PUA films exhibited excellent comprehensive mechanical properties. The tensile strength and elongation at break of the film were 2.17 MPa and 197.19%. When the ratio of BA/St was 30/70, the film had excellent water resistance and was only 6.47%. The obtained PUA composites have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings, and wood finishes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Materials Science
Integrated preparation and properties of polyurethane‐based sandwich structure composites with foamed core layer

Xiaoyan Zeng,Ting Tang,Jiaxuan An,Xiaoxiang Liu,Hongxia Xiang,Youbing Li,Chaolong Yang,Tian Xia

DOI: https://doi.org/10.1002/pc.26167

IF: 5.2

2021-06-15

Polymer Composites

Abstract:The polyurethane-based sandwich structure composite was integrally prepared through using glass fiber reinforced polyurethane composite (GFRPUC) as the skin layer and rigid polyurethane foam (RPUF) as the core layer with the application of a prepolymer infiltrating-foaming integrated manufacturing process. The effect of isocyanate content on the mechanical properties of polyurethane (PU) matrix was explored, and the influences of n-pentane as the foaming agent on the mechanical properties of RPUF and sandwich structure composite were investigated. The results showed that PU prepolymer synthesized with 10% isocyanate group had the excellent comprehensive performances including the tensile strength of 77 MPa, bending strength of 110 MPa and impact toughness of 59 kJ/m2. Under the optimal molding process, the tensile strength, bending, and impact strengths of the GFRPUC surface are 794 MPa, 846 MPa, and 228 kJ/m2, respectively. Using the PU prepolymer method, the surface layer and foam core are integrally fabricated as the sandwich structure composites, whose structure is characterized by strong surface layer and porous core with energy absorption effect. The integrated SSC plate with foamed core layer has excellent mechanical properties especially the core layer containing 2 wt% foaming agent, such as shear property.

materials science, composites,polymer science
On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Dong Quan,Yannan Ma,Dongsheng Yue,Jiaming Liu,Jun Xing,Mingming Zhang,René Alderliesten,Guoqun Zhao

DOI: https://doi.org/10.1016/j.tws.2023.110671

IF: 5.881

2023-05-01

Thin-Walled Structures

Abstract:In this study, an aerospace thermosetting composite was co-curing joined by Polyether-ether-ketone (PEEK) and Polyethylenimine (PEI) films, with an aim of developing advanced composite joints. The semi-crystalline PEEK films were surface activated upon a UV-irradiation technique to obtain a strong film–composite interface, while the amorphous PEI films could be directly used. The fracture behaviour of the composite joints was evaluated and compared with benchmark aerospace adhesive joints. The experimental results proved remarkable mode-I and mode-II fracture resistance of the PEEK co-cured joints at 22 °C and 130 °C, while the PEI co-cured joints exhibited excellent mode-I fracture resistance at 22 °C and mode-II fracture resistance in both testing temperature cases. Extensive elongation, tearing and fracture of the PEEK/PEI plastics were proved to be the main mechanisms for toughness enhancement. Overall, this work had successfully demonstrated the effectiveness of developing advanced composite joints via a co-curing process using high-performance thermoplastic films.

engineering, mechanical,mechanics, civil
Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

Xinjian Shi,Bicheng Chen,Xiaohang Tuo,Yumei Gong,Jing Guo

DOI: https://doi.org/10.1002/app.49926

IF: 3

2020-09-17

Journal of Applied Polymer Science

Abstract:Component contacting degree in a composite material is an important reference for evaluation the performance characteristics. In this article, two composite material systems involving polylactic acid (PLA) with acrylonitrile butadiene styrene (ABS) and PLA with thermoplastic polyurethane (TPU) were prepared by blending and laminating through fused deposition modeling (FDM) 3D printing technology. The mechanical and thermal properties of the as‐prepared composite materials were examined. The results indicated that PLA and TPU played a dominant role in tensile strength and breaking elongation, respectively, in individual composite material. ABS and TPU changed the glass transition peek, crystallinity, and modulus of PLA. The results also suggested that although the processing design of the blending method was more suitable for the contact between two components, but the mechanical properties of laminated composites were closer to theoretical predictions. The structural design and processing technology provide a comparative method and reference basis for studying the performance characteristics of composite materials.

polymer science
Preparation and application of high sound insulation polyurethane composite film through glass fiber reinforcement

Hongyan Liu,Siqi Zhan,Yanyan Bo,Wenhe Ding,Ruize Yuan,Zaiqian Yu,Yuting Zhang,Yuetong Sun,Longjiao Yu,Shiwei Wang,Mingyao Zhang

DOI: https://doi.org/10.1002/app.54960

IF: 3

2023-12-10

Journal of Applied Polymer Science

Abstract:Mechanism and application of glass fiber reinforced high sound insulation polyurethane composite film. Laminated glasses have been widely used in buildings, physical protections, and vehicles because of their safety, sound insulation, thermal insulation, and other performance. In recent years, the high sound insulation performance of laminated glass intermediate films in the frequency range of low or high frequencies has attracted more and more attentions. In this work, a glass fiber/polyurethane elastomer composite (PU‐MGF) film with high transparency and impact resistance has been successfully synthesized, 5 dB of the transmission loss increased at 1600–6000 Hz, and 3.6 dB increased at 63–1600 Hz compared with the control polyurethane film. This is a significant progress in the laminated glass industry. In addition, the transmittance of the composite reaches over 75%. The excellent impact resistance of the laminated glass, based on PU‐MGF film, has been confirmed through falling ball impact test, demonstrating its ability to withstand multiple impacts without spattering. The PU‐MGF film prepared in this work exhibits great potential for applications in building windows, transportation, and soundproof devices.

polymer science
Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics

Jinzhi Li,Maojun Li,Yunfei Peng,Xujing Yang

DOI: https://doi.org/10.1016/j.tws.2024.112512

IF: 5.881

2024-10-03

Thin-Walled Structures

Abstract:The extensive application of hollow composite structures in engineering increasingly demands innovations in highly efficient and economical manufacturing processes as well as materials to achieve lightweighting and enhance mechanical performance. To address the limitations of traditional molding processes in fabricating hollow composite structures with intricate geometries, this study proposes a novel thermal expansion molding technique. This method eliminates the need to remove the mandrel after molding, making it exceptionally suitable for the molding of foam sandwich composite structures. Leveraging this new technique, lightweight sandwich composite tubes filled with polymethacrylimide (PMI) foam and thermal expansion foam were successfully fabricated. Considering the importance of crashworthiness for automotive applications, detailed experimental studies were conducted to investigate the crushing performance of the sandwich composite tubes prepared using this technology. Experimental results reveal that the synergistic effect between the multi-component materials within the sandwich composite tubes confers surprising energy absorption characteristics and crushing stability to the structure. The sandwich composite tubes prepared by this innovative thermal expansion process exhibit promising prospects as crashworthy structures for automotive lightweighting applications, and this method provides critical inspiration for the fabrication of composite structures with complex shapes.

engineering, mechanical,mechanics, civil
The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics

Jiaming Liu,Jia Liu,Dongsheng Yue,Yannan Ma,Mengmeng Han,Dong Quan,Guoqun Zhao

DOI: https://doi.org/10.1016/j.coco.2023.101519

IF: 8

2023-02-08

Composites Communications

Abstract:The co-cure joining of thermoset composites by thermoplastics is an advanced approach to develop robust composite joints. Herein, Polyethylenimine (PEI) and Polyetheretherketone (PEEK) polymers in a form of film, woven mesh, hollow mesh and carbon fibre reinforced plastic were utilised as interlayers for the co-cure joining of an aerospace composite. A cracked-lap shear test was used to investigate the fracture toughness and mechanisms of the co-cured composite joints under a mixed mode-I/II loading condition. The experimental results revealed that the insert of PEI and PEEK interlayers significantly enhanced the mix-mode crack resistance of the composite joints by different levels. The most remarkable increase in the crack initiation energy and crack propagation energy was 161% and 613%, respectively, that were obtained by adding the PEEK film interlayers. The main toughening mechanisms of the PEI film joined composites were crack-pining and matrix toughening of the PEI particles, which were formed by the diffusion of the PEI resins into the composite epoxy matrix during the curing process. Plastic deformation and fracture of the PEEK resins were the main toughening mechanisms of the composites that were co-cure joined by the PEEK films, woven meshes, hollow meshes and carbon fibre reinforced tapes. The crack resistance of the composite joints correlated well with the level of the PEEK fracture phenomena during the mix-mode fracture process.

materials science, composites
Special interface structure and properties for compatible packaging film from biodegradable poly (butylene adipate‐co‐terephthalate)/corn starch composite

Mingtian Ren,Yunguo Liu,Ernest Koranteng,Fangqing Weng,Qiangxian Wu

DOI: https://doi.org/10.1002/pen.26728

2024-03-21

Polymer Engineering & Science

Abstract:Compatibility mechanise. Starch is an environmentally friendly, renewable, green resource and an ideal alternative to polymers from petroleum resources. The preparation of high‐performance poly (butylene adipate‐co‐terephthalate) (PBAT)/corn starch composite materials is of significant importance for saving production costs and expanding the application fields of PBAT plastics. This study employed novel processing techniques such as melt blending and injection molding to fabricate PBAT/corn starch composite materials with polyurethane prepolymer (PCLPU) as a compatibilizer. The impact of varying polyurethane prepolymer concentrations on the composite material's structure, mechanical properties, morphology, thermal behavior, and water absorption was scrutinized. Mechanical performance testing showed that compared to the composite material without PCLPU (P90CS10), adding 5% PCLPU can increase the material's elongation at break from 350.2% to 359.0% and the tensile strength from 12.9 to 19.8 MPa. Scanning electron microscopy, thermogravimetric analysis, and water absorption results indicate that the composite material with the addition of the PCLPU compatibilizer has better compatibility, thermal stability, and water resistance than P90CS10. Additionally, the prepared composite material could be successfully blown into a thin film, further enriching the application of the composite material. Highlights A special interface structure was prepared to increase the compatibility of the poly (butylene adipate‐co‐terephthalate)/corn starch composite. Both the strength and the flexibility of the composite were successfully improved. The processing method through which modification was conducted in the melt was convenient, green, and effective. The prepared composite material has potential application value, and the processing method of the composite material is easy to transfer to industrial production.

engineering, chemical,polymer science
Prescription for workplace safety: bend and lift correctly to avoid back injuries!

R. Sturdevant

1993-10-01

Abstract:
Preparation and properties of poly (butylene adipate‐co‐terephthalate) composites with high bamboo flour content

Mingtian Ren,Sike Jiang,Yaqing Zhang,Huiling Wang,Qiangxian Wu

DOI: https://doi.org/10.1002/pc.28722

IF: 5.2

2024-06-25

Polymer Composites

Abstract:The influence of different polyurethane prepolymers on the interfacial structure of bamboo flour/PBAT composite. This study focused on the preparation of bamboo flour/Poly (butylene adipate‐co‐terephthalate) (PBAT) composites with high bamboo flour content and high mechanical strength using polyurethane prepolymer as chemical–physical compatibilizer via in‐situ reaction. Additionally, this work explored the effects of different bamboo flour contents and different types of polyurethane prepolymers on the mechanical properties, morphology, thermodynamics, water absorption, and surface wettability of the bamboo flour/PBAT composites. The results showed that PBA‐based polyurethane prepolymer (PBAPU) was an effective compatibilizer, promoting the interfacial adhesion between bamboo flour and PBAT. The strength at break, elongation at break, and impact strength of composites with 50% bamboo flour content reached 19.56 MPa, 25.53%, and 12.8 KJ/m2. With the increase of bamboo flour content, the strength of composites was still higher. The addition of PBAPU enhanced the thermal stability, mechanical properties, water resistance, and hydroscopicity of the bamboo flour/PBAT composites. Furthermore, the compatibilization of PBA‐based polyurethane prepolymer on composites was better than that of PCL‐based polyurethane prepolymer. Overall, we provided an effective strategy for preparing renewable, green, and practical high‐bamboo flour composites. Highlights This work successfully prepared bamboo flour/PBAT composites with high bamboo content using an in‐situ melt blending reaction. A new interface structure of physical PBA‐PBA interaction between the PBAPU layer and PBAT matrix improved the compatibilization of the composites. PBAPU as a compatibilizer effectively improved the interface compatibility, thermal stability, and water resistance of Bamboo flour/PBAT blends. Bamboo flour/PBAT composites with high bamboo flour content have excellent mechanical properties.

materials science, composites,polymer science
Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Hai-Chen Zhang,Ben-hao Kang,Le-Shan Chen,Xiang Lu

DOI: https://doi.org/10.1016/j.polymertesting.2020.106521

IF: 5.1

2020-07-01

Polymer Testing

Abstract:Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)∼PLA copolymer (PU ∼ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.

materials science, characterization & testing,polymer science
Study on the Poly(3‐hydroxybutyrate‐co−4‐hydroxybutyrate)‐based Composites Toughened by Synthesized Polyester Polyurethane Elastomer

Tianxiang Su,Rui Zhang,Jianjian Wang,Wei Shao,Yuan Hu

DOI: https://doi.org/10.1002/app.42740

IF: 3

2015-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTIn this study, polycaprolactone(PCL)‐based polyurethane (PU) elastomer containing 45 wt % hard segment component was synthesized and characterized by fourier transform infrared spectroscopy, gel permeation chromatography, and X‐ray diffraction. As a toughening agent, the as‐synthesized PU was incorporated into biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3,4)HB] by solution casting to prepare P(3,4)HB/PU composites. The microstructure and properties of P(3,4)HB/PU composites were investigated using transmission electron microscopy, X‐ray diffraction, tensile testing, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and activated sludge degradation testing. The results show that PU can disperse well in a P(3,4)HB matrix. The elongation at break of P(3,4)HB/PU composites is remarkably increased while the yield strength and elastic modulus are decreased with an increase in PU content. At the same time, it is found that the fracture characteristic of P(3,4)HB is obviously transformed from brittleness into ductility with a gradual increase in PU loading. Moreover, the thermal stability of P(3,4)HB/PU composites is significantly improved compared with that of pure P(3,4)HB. In addition, the biodegradation rate of P(3,4)HB/PU composites is evidently reduced with the increase of PU content in the activated sludge degradation testing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42740.
Forming performance and environmental impact of bamboo fiber reinforced polypropylene composites based on injection molding process for automobiles

Feng Zhao,Xiaorui Liu,Tao Feng,Jialong Zhao,Wei Guo

DOI: https://doi.org/10.1002/pc.29008

IF: 5.2

2024-09-20

Polymer Composites

Abstract:The molding process of lightweight bamboo fiber reinforced polypropylene composites. To explore the potential application of plant fiber reinforced composites for automotive component applications, this study prepared bamboo fiber (BF)/nano‐talc/polypropylene (PP) composites based on the injection molding process, comprehensively evaluated the effect of reinforcement materials on the forming properties of composites, including thermal performance, mechanical properties, water absorption, etc. Furthermore, taking a certain automotive injection molded interior part as the object, a life‐cycle assessment from production to the gate was conducted based on the real energy and material consumption during the composite preparation process. The results indicate that adding BF and talc powder increased the thermal stability, density, hardness, viscosity, and crystallinity of the composites while reducing the water contact angle on the surface. Surface‐modified BF and PP showed good compatibility. Talc powder exhibited good dispersibility in PP, and the synergistic effect of BF and talc powder effectively enhanced the composite performance. The tensile, flexural, and impact strength of the composites were improved by 40.64%, 51.48%, and 66.51%, respectively, compared with pure PP. The modulus of the composite increased nearly 2 times compared with pure PP. Additionally, the composite demonstrated good friction and wear properties. The environmental impact of the BF composite manufacturing process was significantly higher than that of pure PP. The substantial consumption of electricity, chemicals, and water resources in the extraction and modification processes of BF were the main factors. The findings of this study contribute to achieving green, high‐performance BF composite manufacturing and the expansion of its applications. Highlights Composites have a higher environmental impact compared to PP. BF and talc can synergistically enhance the performance of composites. BF shows good compatibility with PP. Composites exhibit good friction and wear characteristics.

materials science, composites,polymer science
Quasi-static and dynamic mechanical responses of hybrid laminated composites based on high-density flexible polyurethane foam

Ruosi Yan,Rui Wang,Ching-Wen Lou,Shih-Yu Huang,Jia-Horng Lin

DOI: https://doi.org/10.1016/j.compositesb.2015.08.037

2015-12-01

Abstract:Hybrid laminated composites were fabricated based on high-density flexible polyurethane foam and reinforced with inter/intra-ply hybrid laminates. Transient responses of hybrid composites under quasi-static and dynamic loadings with various thicknesses and expansion factors were comparatively investigated. Experimental results revealed that foam cell collapse and hybrid laminates rupture were dominant mechanisms of energy absorption. Interlaminar stress and composite tensile strength determined the compressive potential energy and double-peak behavior. Quasi-static bursting and puncture resistances exhibited totally different relationships to various constructions and expansion factors. Energy dissipation capacity is influenced more significantly by the constant rate of transverse (CRT) puncture than dynamic puncture process. CRT puncture resistance is superior to the corresponding dynamic puncture resistance for all constructions. The hybrid laminated composites contributes to eliminate more than 95% of the incident force in the drop weight impact test. Compared with non-laminated panel, the hybrid laminated composites exhibited higher resistance to static and dynamic loadings.
Giant Cushioning Effect in Facile Polymer/Nanoclay-Coated Flexible Polyurethane Foams

Wenfei Ji,Qicheng Zhang,Jeroen S van Duijneveldt,Wuge H Briscoe,Fabrizio Scarpa

DOI: https://doi.org/10.1021/acsapm.4c01437

2024-08-22

Abstract:In this work, a flexible polyurethane (PU) foam/polymer/clay (PUF/PAASep) composite is prepared via a simple dip-coating method. The composite exhibits excellent damping properties under quasi-static compression, vibration transmissibility, and impact resistance. For the composite preparation, sepiolite (Sep) dispersion in a polyacrylic acid (PAA) solution is first homogenized and evaluated using microscopy, and the obtained PAASep suspension is used to coat the PU foam uniformly for optimization of the quasi-static mechanical performance of the foam composites. The PU foam struts coated with 1 wt % PAA and 3 wt % sepiolite are strengthened, resulting in an 8-fold improvement of the stiffness and three-times increase of the impact force resistance compared to the uncoated PU foams. More importantly, the PU foam composites show a remarkable vibration damping capability, with the loss modulus 57 times that of the uncoated PU foams, enabled by micro friction and stick-slip effects mediated by the PAASep coatings. The facile prepared PAASep-coated PU foams have significant potential for cushioning, packaging, and broad engineering applications involving energy absorption.
Manufacturing and evaluation of polyurethane composite structural insulated panels

M Mohamed,R Hussein,A Abutunis,Z Huo,K Chandrashekhara,LH Sneed

DOI: https://doi.org/10.1177/1099636215626597

2016-08-03

Abstract:Composite materials are increasingly used in applications of civil infrastructure and building materials. The new generations of two-part thermoset polyurethane resin systems are desirable materials for infrastructure applications. This is due to high impact resistance, superior mechanical properties, and reduced volatile organic compounds when compared to the conventionally used resin systems such as vinyl ester and polyester. Glass fiber-reinforced two-part polyurethane composites and low-density polyurethane foam are used to design and manufacture composite structural insulation panels using vacuum assisted resin transfer molding process for temporary housing applications. Using these types of composite panels in building construction will result in cost-efficient, high-performance products due to inherent advantages in design flexibility. Use of core-filled composite structures offers additional benefits such as high strength, stiffness, lower structural weight, ease of installation and structure replacement, and higher buckling resistance than the conventional panels. Energy efficiency is known to be inherently better with the core-filled composite panel than in a metallic material. The panels can be designed to resist the required loads, and the study aims to evaluate the ability of lab scale tests and models to predict part quality in full-scale parts. Furthermore, it discusses the manufacturing challenges. Flexural tests and energy consumption evaluations were performed on these structural components. Finite element simulation results were used to validate the flexural experiment findings.

engineering, mechanical,materials science, composites, characterization & testing
A “Plasticizing-Foaming-Reinforcing” approach for creating thermally insulating PVC/polyurea blend foams with shape memory function

Jiangan You,Zhiwei Jiang,Hanqing Jiang,Jian Qiu,Minggang Li,Haiping Xing,Jian Xue,Tao Tang

DOI: https://doi.org/10.1016/j.cej.2022.138071

IF: 15.1

2022-12-15

Chemical Engineering Journal

Abstract:Polymer rigid foams are highly required in the fields of wind power, transportation and construction due to lightweight and high performances. Herein, we have established a novel strategy of “plasticizing-foaming-reinforcing” (PFR) for preparing reprocessable thermoplastic/thermoset blend foams. PVC and the crosslinking monomers for polyurea (CMs) were melting mixed and foamed via supercritical CO2 (sc-CO2) foaming process followed by post-curing. The resultant PVC/polyurea blend foam presents ultra-high expansion ratio (51 times) and much smaller cell size as compared to those prepared by the traditional chemical foaming method, thus displays excellent thermal insulation performance (26.95 mW m−1 K−1) and excellent mechanical robustness, especially at lower temperature. Furthermore, the PFR strategy provides the PVC/CMs blend foam with a flexible molding ability at room temperature, allowing to form versatile three-dimensional (3D) structures. Strikingly, the microphase-separation structure of PVC-encapsulated polyurea in the cell wall endows the PVC/polyurea blend foam with excellent shape memory behavior. The PFR strategy paves a new avenue to fabricate thermoplastic/thermosetting (TP/TS) polymer blend foams in an easy-going green foaming process, which combines the performance advantages of both types of resins simultaneously possessing recyclable property.
Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Youpeng Zhang,Chong Ding,Na Zhang,Yidi Wang,Yingge Zhang,Hongfen Li,Yihe Zhang

DOI: https://doi.org/10.1016/j.jmrt.2023.09.168

IF: 6.267

2023-09-22

Journal of Materials Research and Technology

Abstract:Filler agglomeration, single filler type, poor filler-matrix compatibility, and lack of toughness are the main problems that restrict the development of the polyvinyl chloride (PVC) manufacturing industry. In this work, PVC composites were prepared with silica micropowder (SMP) as a filler. Titanate coupling agent (TCA-KTTO) modification and chlorinated polyethylene (CPE) toughening treatment were utilized to enhance the composites performance. Herein, we successfully obtained SMP/PVC composites with high strength, high toughness, and outstanding heat resistance. The optimal dosage of titanate coupling agent for SMP surface modification was determined to be 1.5 wt% by mechanical and thermal conductivity tests. With an increase in the filling content of modified silica micropowder (mSMP), the density, surface hardness, Young's modulus, flexural modulus, thermal conductivity, and thermal stability of mSMP/PVC composites were significantly improved. The notched impact strength of mSMP/PVC composites shows a significant increase with the addition of CPE. At a CPE dosage of 7.5 parts per hundred parts of resin (phr), the notched impact strength of mSMP/PVC composites was enhanced by 59.15%, and the glass transition temperature was improved by 6.1 °C. The co-extruded hollow flooring, fabricated by the SMP reinforced PVC composites, meets Chinese standard GB/T 24508-2020, which has a wide range of applications in panels and profiles, such as seaside boardwalks and outdoor parks.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Effects of Modified Al2O3-Decorated Ionic Liquid on the Mechanical Properties and Impact Resistance of a Polyurethane Elastomer

Fan Hu,Jun Gao,Biao Zhang,Fugang Qi,Nie Zhao,Xiaoping Ouyang

DOI: https://doi.org/10.3390/ma14164712

IF: 3.4

2021-08-20

Materials

Abstract:In this work, a new composite material with excellent dynamic impact resistance and outstanding quasi-static mechanical properties was synthesized. The composite material is composed of a polyurethane elastomer and a novel nano-polymer. The nano-polymer was composed of silane coupling agent-modified alumina microspheres and functionalized ionic liquids by double bond polymerization. The universal testing machine and split Hopkinson pressure bar were used to characterize the compression behavior, strength and energy absorption of the composite materials under static and dynamic conditions. Additionally, the comprehensive mechanical properties of polyurethane elastomer with different nano-polymer loadings (0.5–2.5 wt.%) were studied. The results show that whether it was static compression or dynamic impact, the polyurethane elastomer with 1% nano-polymer had the best performance. For the composite material with the best properties, its compressive yield strength under the static compression was about 61.13% higher than that of the pure polyurethane elastomer, and its energy absorption of dynamic impacts was also increased by about 15.53%. Moreover, the shape memory effect was very good (shape recovery is approximately 95%), and the microscopic damage degree was relatively small. This shows that the composite material with the best properties can withstand high compression loads and high-speed impacts. The developed composite material is a promising one for materials science and engineering, especially for protection against compression and impacts.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
The fabrication of thermoplastic polyurethane/leather powder composite film with excellent mechanical property

Chen Li,Renhao Li,Pei Lyu,Yun Wang,Chunhua Zhang,Fangyin Dai,Xin Liu

DOI: https://doi.org/10.1016/j.coco.2021.100694

IF: 8

2021-06-01

Composites Communications

Abstract:The reuse of leather waste materials has become a global challenge due to the increase of leather products. Herein, we recycled the leather waste using a cost-effective mechanical method. The leather-like composites with good mechanical properties were prepared by combining thermoplastic polyurethane (TPU) with leather powder (LP) from leather waste. The morphologies, composition, thermal performance, and mechanical properties of the composite film were investigated. The results of mechanical properties showed that the toughness of TPU/LP composite film with 20% LP using binary solvents (N,N-Dimethylformamide and toluene) was 1717.6% higher than that of TPU/LP composite film with 20% LP using the traditional method. Additionally, the TPU/LP composite film prepared by binary solvents exhibited good solvent resistance, which may be potentially used in practical applications.

materials science, composites

The value of endoscopic sclerotherapy of esophageal varices.

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Integrated preparation and properties of polyurethane‐based sandwich structure composites with foamed core layer

On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

Preparation and application of high sound insulation polyurethane composite film through glass fiber reinforcement

Fabricating sandwich composite tubes using a new thermal expansion technique: Materials preparation and energy absorption characteristics

The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics

Special interface structure and properties for compatible packaging film from biodegradable poly (butylene adipate‐co‐terephthalate)/corn starch composite

Prescription for workplace safety: bend and lift correctly to avoid back injuries!

Preparation and properties of poly (butylene adipate‐co‐terephthalate) composites with high bamboo flour content

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Study on the Poly(3‐hydroxybutyrate‐co−4‐hydroxybutyrate)‐based Composites Toughened by Synthesized Polyester Polyurethane Elastomer

Forming performance and environmental impact of bamboo fiber reinforced polypropylene composites based on injection molding process for automobiles

Quasi-static and dynamic mechanical responses of hybrid laminated composites based on high-density flexible polyurethane foam

Giant Cushioning Effect in Facile Polymer/Nanoclay-Coated Flexible Polyurethane Foams

Manufacturing and evaluation of polyurethane composite structural insulated panels

A “Plasticizing-Foaming-Reinforcing” approach for creating thermally insulating PVC/polyurea blend foams with shape memory function

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Effects of Modified Al2O3-Decorated Ionic Liquid on the Mechanical Properties and Impact Resistance of a Polyurethane Elastomer

The fabrication of thermoplastic polyurethane/leather powder composite film with excellent mechanical property