Abstract:Polymer-based syntactic foams find use in the marine industry as primary structural materials due to their inherent lightweight nature and enhanced mechanical properties relative to pure HDPE. 3-D printing these materials circumvents the use of joining assemblies, enabling the production of complex shapes as standalone structures. Although the quasi-static response of these 3D printed foams has been well studied independently in recent years, their dynamic impact resistance and tolerance as potential core material for sandwich panels have not been the focus. Moreover, 3D printing is known to impart directionality in the printed syntactic foams, which may introduce failure mechanisms typically not observed in molded foams. It is therefore important to investigate the mechanics of 3-D printed syntactic foam core composite sandwich structures under impact loading and characterize their failure mechanisms for establishing dynamic impact resistance. To this end, 3-D printed syntactic foams have been developed using rasters of High-Density Polyethylene (HDPE) and Glass MicroBalloon (GMB) fillers by adopting the Fused Raster Fabrication (FFF) technique. The current study is performed to assess the impact performance of these composite foam cores based on the volume fraction of fillers and print orientation. The weight percentage of GMB fillers in printed specimens ranges from 0% to 60% in increments of 20%. This study presents the impact response of these composite sandwich panels at different energy levels, in compliance with ASTM D7136/D7136M - 20. Observations suggest that an increase in GMB % in HDPE matrix improves the impact performance in terms of the peak load of the material, but the failure behavior becomes brittle to an extent. Observing the failed specimens under a Micro-CT scanner captures the failure morphologies and helps characterize failure processes during impact. It is noticed that core materials with higher GMB content are prone to individual raster breakage and delamination at the back face, in addition to debonding between individual rasters. Specimens printed along the longer dimension (y-direction) impart more warping in the final sandwich structures than that of specimens printed along the shorter dimension (x-direction). Therefore, they are more susceptible to delamination at the back face. Addition of GMB fillers mitigate the tendency of the sandwich panels to warp.

Manufacturing and evaluation of polyurethane composite structural insulated panels

Thermal and Mechanical Performance of 3-Phase Polymer Composite Panels for Structural Applications

Multi-Cellular 3D Flat-Knitted Composite Panels Strengthened by PU-Foam: Manufacturing, Testing and Simulating

Uhpc-Xps Insulation Composite Board Reinforced by Glass Fiber Mesh: Effect of Structural Design on the Heat-Transfer, Mechanical Properties and Impact-Resistance

Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

Study on Flexural Behavior of Glass Fiber Reinforced Plastic Sandwich Composites Using Liquid Thermoplastic Resin

Integrated preparation and properties of polyurethane‐based sandwich structure composites with foamed core layer

Evaluation of Wood Composite Sandwich Panels as a Promising Renewable Building Material

Investigation of a Novel Composite Cladding Wall Panel in Flexure

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Improving the quality of rigid polyurethane foam sandwich insulation panels

Characteristics of Carbon-Fiber-Reinforced Polymer Face Sheet and Glass-Fiber-Reinforced Rigid Polyurethane Foam Sandwich Structures under Flexural and Compression Tests

Development of Structural Insulated Panels Made from Wood-Composite Boards and Natural Rubber Foam

Low velocity impact and compression after impact behaviour of polyester pin-reinforced foam filled honeycomb sandwich panels

Mechanical behavior test and analysis of HEH sandwich external wall panel

Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels

DYNAMIC IMPACT RESISTANCE OF COMPOSITE SANDWICH PANELS WITH 3-D PRINTED POLYMER SYNTACTIC FOAM CORES

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

Effects of core geometry, silica nanoparticles, and polyurethane foam on the mechanical properties of a novel circular-shaped core sandwich panels under compression test: Experimental study

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications