Informed consent issues hobble cancer genome scheme

E. Waltz

DOI: https://doi.org/10.1038/NM0706-719A

2006-06-28

Nature Network Boston

Abstract:

What problem does this paper attempt to address?

Localized papular cutaneous schistosomiasis: two cases in travellers

J. Leman,G. Small,D. Wilks,M. Tidman

DOI: https://doi.org/10.1046/J.1365-2230.2001.00761.X

2001-01-01

Abstract:Schistosomiasis is endemic in many parts of the tropics and subtropics with an estimated 200 million people, at least, infected worldwide. The symptoms and signs of vesical and gastrointestinal forms are readily recognized but ectopic forms are rare even in endemic areas and present a greater diagnostic challenge, particularly when they are encountered in nontropical climes. We now report two cases of cutaneous schistosomiasis presenting in Edinburgh with subtle, but remarkably similar, skin lesions.
Factors affecting accuracy in the additive manufacturing of interim dental prostheses: A systematic review

Tingmin Zhang,Yuying Zheng,Guillermo Pradíes,Shizhu Bai

DOI: https://doi.org/10.1016/j.prosdent.2024.08.011

2024-09-17

Abstract:Statement of problem: A systematic review of the effect of different factors on the accuracy of additively manufactured (AM) interim dental prostheses is lacking. Purpose: The purpose of this systematic review was to identify potential factors that may affect the accuracy of AM interim dental prostheses. Material and methods: The review adhered to the guidelines outlined in the preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement. The protocol was registered in the international prospective database of systematic reviews (PROSPERO) (CRD42024521564). The risk of bias in the included studies was assessed by using the Joanna Briggs Institute (JBI) checklist. Two reviewers performed an electronic search on the Web of Science, Scopus, PubMed, and Embase databases for articles published up to the end of 2023. Results: The electronic search resulted in 406 studies. After removing duplicates, 205 studies remained. Thirty-one studies (30 in vitro and 1 in vivo) were included and categorized into 6 types: AM material (type and composition), prosthetic factor (tooth type, restoration size, finish line, abutment taper), AM system (technique and printer), AM parameters (layer thickness, printing orientation), postprocessing (rinsing, postpolymerization), and aging. Conclusions: The accuracy of AM interim dental prostheses is affected by factors that include the AM material, prosthetic factors, the AM system, the AM parameters, postprocessing, and aging.
Effect of different storage conditions on dimensional accuracy of 3D‐printed dental models

Raghdah M. Alshaibani,Yuwei Fan,Russell Giordano,Russell Giordano II

DOI: https://doi.org/10.1111/jopr.13834

2024-02-27

Journal of Prosthodontics

Abstract:Purpose The objective was to determine the accuracy of 3D‐printed dental models subjected to different storage conditions using six different material and printer combinations. Materials and Methods Three completely dentate models were designed using dental CAD software (3Shape Dental System). A horseshoe‐shaped solid base with a posterior horizontal bar was used. The models were printed in a horizontal direction against the building platform without support. The models were printed using six printers with the corresponding recommended resin material: Carbon M2 (DPR10), HeyGears A2D4K (Model HP UV2.0), Stratasys J5 (MED610), Stratasys Origin One (DM200), Envision One (E‐Model LightDLP), and Asiga Pro4K (VeriModel) with a standard layer thickness of 50 μm. All printed models underwent scanning using a laboratory scanner (Sirona inEOS X5) after printing. Subsequently, the models were randomly assigned into three groups of storage conditions, LT: cold environment (4 ± 1°C), HT: hot and dry environment (50 ± 2°C), and RT: room temperature (25 ± 2°C) serving as the control. Each group was kept under the designated condition and was scanned at 1, 2, 3, 4, and 8 weeks. The total number of models (N) was 72, with 6 printers producing 12 models per printer for 3 storage conditions, resulting in 4 models for each storage condition and each printer. The generated STL files were imported into a 3D inspection software for comparison with the original STL files. In‐tolerance percentage, the deviation RMS, trueness, and precision were obtained and analyzed with least square mean linear regression using JMP Pro 15 to identify the significant effects (α = 0.05). Results The in‐tolerance percentage as‐printed was significantly different among different printers. Significant dimension deviations were observed after the first week of storage at HT and with subsequent weeks of storage. RT and LT did not show significant dimensional changes. Models printed with Carbon M2 showed the highest in‐tolerance percentages compared to the other printers. Conclusions The model deviations were affected by storage conditions and the printer used, with high‐temperature storage showed least stability compared to low and room temperatures. No significant difference was observed between low and room temperature storage conditions. The Carbon M2 printer showed the highest accuracy among all printers tested. The region had a significant effect on the deviation measured, with the abutment body showing the least deviation. Among the 3D printers evaluated, A2D4K by HeyGears and Carbon M2 printers demonstrated the highest accuracy in terms of both precision and trueness.

dentistry, oral surgery & medicine
Dimensional Accuracy of Dental Models for Three-Unit Prostheses Fabricated by Various 3D Printing Technologies

Soo-Yeon Yoo,Seong-Kyun Kim,Seong-Joo Heo,Jai-Young Koak,Joung-Gyu Kim

DOI: https://doi.org/10.3390/ma14061550

IF: 3.4

2021-03-22

Materials

Abstract:Previous studies on accuracy of three-dimensional (3D) printed model focused on full arch measurements at few points. The aim of this study was to examine the dimensional accuracy of 3D-printed models which were teeth-prepped for three-unit fixed prostheses, especially at margin and proximal contact areas. The prepped dental model was scanned with a desktop scanner. Using this reference file, test models were fabricated by digital light processing (DLP), Multi-Jet printing (MJP), and stereo-lithography apparatus (SLA) techniques. We calculated the accuracy (trueness and precision) of 3D-printed models on 3D planes, and deviations of each measured points at buccolingual and mesiodistal planes. We also analyzed the surface roughness of resin printed models. For overall 3D analysis, MJP showed significantly higher accuracy (trueness) than DLP and SLA techniques; however, there was not any statistically significant difference on precision. For deviations on margins of molar tooth and distance to proximal contact, MJP showed significantly accurate results; however, for a premolar tooth, there was no significant difference between the groups. 3D color maps of printed models showed contraction buccolingually, and surface roughness of the models fabricated by MJP technique was observed as the lowest. The accuracy of the 3D-printed resin models by DLP, MJP, and SLA techniques showed a clinically acceptable range to use as a working model for manufacturing dental prostheses

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Effects of Post-Processing Parameters on 3D-Printed Dental Appliances: A Review

Mana Hassanpour,Poom Narongdej,Nicolas Alterman,Sara Moghtadernejad,Ehsan Barjasteh

DOI: https://doi.org/10.3390/polym16192795

IF: 5

2024-10-01

Polymers

Abstract:In recent years, additive manufacturing (AM) has been recognized as a transformative force in the dental industry, with the ability to address escalating demand, expedite production timelines, and reduce labor-intensive processes. Despite the proliferation of three-dimensional printing technologies in dentistry, the absence of well-established post-processing protocols has posed formidable challenges. This comprehensive review paper underscores the critical importance of precision in post-processing techniques for ensuring the acquisition of vital properties, encompassing mechanical strength, biocompatibility, dimensional accuracy, durability, stability, and aesthetic refinement in 3D-printed dental devices. Given that digital light processing (DLP) is the predominant 3D printing technology in dentistry, the main post-processing techniques and effects discussed in this review primarily apply to DLP printing. The four sequential stages of post-processing support removal, washing, secondary polymerization, and surface treatments are systematically navigated, with each phase requiring meticulous evaluation and parameter determination to attain optimal outcomes. From the careful selection of support removal tools to the consideration of solvent choice, washing methodology, and post-curing parameters, this review provides a comprehensive guide for practitioners and researchers. Additionally, the customization of post-processing approaches to suit the distinct characteristics of different resin materials is highlighted. A comprehensive understanding of post-processing techniques is offered, setting the stage for informed decision-making and guiding future research endeavors in the realm of dental additive manufacturing.

polymer science
Clear guidance to select the most accurate technologies for 3D printing dental models - A network meta-analysis✰

Anna Németh,Viktória Vitai,Márk László Czumbel,Bence Szabó,Gábor Varga,Beáta Kerémi,Péter Hegyi,Péter Hermann,Judit Borbély

DOI: https://doi.org/10.1016/j.jdent.2023.104532

Abstract:Objectives: Thus far, the findings of numerous studies conducted on the accuracy of three-dimensional (3D) printed dental models are conflicting. Therefore, the aim of the network meta-analysis (NMA) is to determine the accuracy of 3D printed dental models compared with digital reference models. Data: Studies comparing the accuracy of 3D printed full-arch dental models manufactured using different printing techniques to initial STL files were included. Sources: This study was registered in PROSPERO (CRD42021285863). An electronic search was performed across four databases in November 2021, and search was restricted to the English language. Study selection: A systematic search was conducted based on a prespecified search query. 16,303 articles were pooled after the removal of the duplicates. Following study selection and data extraction, 11 eligible studies were included in the NMA in 6 subgroups. The outcomes were specified as trueness and precision and expressed as root mean square (RMS) and absolute mean deviation values. Seven printing technologies were analyzed: stereolithography (SLA), digital light processing (DLP), fused deposition modeling/fused filament fabrication (FDM/FFF), MultiJet, PolyJet, continuous liquid interface production (CLIP), and LCD technology. The QUADAS-2 and GRADE were used to evaluate the risk of bias and certainty of evidence. Conclusions: SLA, DLP, and PolyJet technologies were the most accurate in producing full-arch dental models. Clinical significance: The findings of the NMA suggest that SLA, DLP, and PolyJet technologies are sufficiently accurate for full-arch dental model production for prosthodontic purposes. In contrast, FDM/FFF, CLIP, and LCD technologies are less suitable for manufacturing dental models.
Three-Dimensional Printing Technology in Orthodontics for Dental Models: A Systematic Review

Ioannis A. Tsolakis,Sotiria Gizani,Nearchos Panayi,Georgios Antonopoulos,Apostolos I. Tsolakis

DOI: https://doi.org/10.3390/children9081106

2022-07-23

Children

Abstract:Background: Three-dimensional printing technology is an additive manufacturing technology that is used to reconstruct 3D objects. In the last decade, it has been rapidly involved in dentistry and in orthodontics. This article aims to review the literature and present the accuracy of different 3D printer types and any factors that could affect the 3D printing of dental models in the orthodontic field. Methods: The search strategy of this systematic review included keywords in combination with MeSH terms in Medline, Scopus, and Cochrane Library until June 2022 and only in English. Results: Eleven articles were selected for our study. All the articles were in vitro prospective studies, and they presented a low risk of bias. The results suggested that the accuracy of a printed dental cast can be affected by the different types of 3D technologies, the dental cast’s base design, and the printing materials. The accuracy appears to not be affected by the layer height and the position of the model on the building template. Conclusions: According to this systematic review, all different types of 3D technology can produce clinically accepted results for orthodontic purposes. There is a need for more studies to clarify the accuracy and added value of 3D printing technology in orthodontics.

pediatrics
A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations

Marta Revilla‐León,Matthew J. Meyers,Amirali Zandinejad,Mutlu Özcan,Marta Revilla-León

DOI: https://doi.org/10.1111/jerd.12438

2018-10-27

Journal of Esthetic and Restorative Dentistry

Abstract:OBJECTIVES: Additive manufacturing (AM) technologies can be used to fabricate 3D-printed interim dental restorations. The aim of this review is to report the manufacturing workflow, its chemical composition, and the mechanical properties that may support their clinical application.OVERVIEW: These new 3D-printing provisional materials are typically composed of monomers based on acrylic esters or filled hybrid material. The most commonly used AM methods to manufacture dental provisional restorations are stereolithography (SLA) and material jetting (MJ) technologies. To the knowledge of the authors, there is no published article that analyzes the chemical composition of these new 3D-printing materials. Because of protocol disparities, technology selected, and parameters of the printers and material used, it is notably difficult to compare mechanical properties results obtained in different studies.CONCLUSIONS: Although there is a growing demand for these high-tech restorations, additional information regarding the chemical composition and mechanical properties of these new provisional printed materials is required.CLINICAL SIGNIFICANCE: Additive manufacturing technologies are a current option to fabricate provisional dental restorations; however, there is very limited information regarding its chemical composition and mechanical properties that may support their clinical application.

dentistry, oral surgery & medicine
Effect of aging on dimensional accuracy and color stability of CAD-CAM milled and 3D-printed denture base resins: a comparative in-vitro study

Marwa A. Gad,Ahmed M. Abdelhamid,Mahmoud ElSamahy,Salma Abolgheit,Kenda I. Hanno

DOI: https://doi.org/10.1186/s12903-024-04848-9

2024-09-27

BMC Oral Health

Abstract:There is a lack of studies comparing the dimensional accuracy and color stability of denture base resins made using computer-aided design and computer-aided manufacturing (CAD-CAM) milling, 3-dimensional (3D) printing, and conventional denture processing techniques. This makes it challenging to determine the best method to fabricate complete dentures. The objective of this in vitro investigation was to assess and contrast the color stability and dimensional accuracy of denture base resins that were 3D printed and CAD-CAM milled, both before and after aging by thermocycling using digital surface matching technology and a benchtop laser scanner without using a spray, to optimize adaptation of the denture base and cast to minimize any imperfections and to evaluate the impact of the denture cleansing solution on the stability of color.

dentistry, oral surgery & medicine
Evaluation of Three-Dimensional Digital Models Formulated From Direct Intra-oral Scanning of Dental Arches in Comparison With Extra-oral Scanning of Poured Dental Models in Terms of Dimensional Accuracy and Reliability

Samer T. Jaber,Mohammad Y. Hajeer,Khaled Walid Alkhouli,Rabab Mohamad Al-Shamak,Khaldoun M.A. Darwich,Ossama Aljabban,Mohammad Khursheed Alam,Jehad M. Kara-Boulad

DOI: https://doi.org/10.7759/cureus.54869

2024-02-25

Cureus

Abstract:BACKGROUND: The study's objective was to assess the dimensional accuracy and reliability of dental digital models prepared by direct intraoral scanning and indirect scanning of the plaster models compared to the plaster models as the gold standard.MATERIALS AND METHODS: This study included 20 patients. Nine had a class I malocclusion, seven had a class II malocclusion, and four had a class III malocclusion. Intraoral scanning was done for the upper and lower arches of all the patients enrolled in this study using an intraoral scanner (i700; Medit, Seoul, Korea). The next step was preparing the plaster model for the control group. Addition-silicone impressions were taken for each patient's arches. The impressions were poured according to American Board of Orthodontics (ABO) standards. Finally, the digital models of the indirect scanning group were prepared using a 3D desktop scanner (T710; Medit). In total, 26 measurements were made on the plaster and digital models. Paired t-tests were used to test for significant differences between the studied groups. The reliability of the studied techniques was tested using intraclass correlation coefficients (ICCs). Because of the multiple comparisons, the ɑ level was adjusted and set at 0.002.RESULTS: No significant differences were found between the intraoral scanning group (20 patients) and the plaster models group (20 patients; P>0.002). The ICCs ranged from 0.814 to 0.993, indicating excellent agreement between the direct digital and traditional plaster models. There were no significant differences between the digital and original plaster models (P>0.002). ICCs ranged from 0.834 to 0.995, indicating excellent agreement between the indirect digital and original plaster models. No significant differences were detected between the direct and indirect digital models (P>0.002). ICCs ranged between 0.813 and 0.999, indicating excellent agreement between direct and indirect digital models.CONCLUSION: Both direct and indirect scanning techniques are accurate and reliable for digital model preparation and can be considered an alternative to traditional plaster models used in clinical orthodontics diagnostic applications. The intraoral scanning technique can be considered a valid alternative for indirect scanning of the plaster models to prepare digital working models during the digital design and fabrication of orthodontic appliances such as clear aligners.
Accuracy of digital complete dentures: A systematic review of in vitro studies

Can Wang,Yi-Fei Shi,Pei-Jin Xie,Jun-Hua Wu

DOI: https://doi.org/10.1016/j.prosdent.2020.01.004

Abstract:Statement of problem: Reports on digital complete dentures (CDs) are increasing. However, systematic reviews on their accuracy and influencing factors are lacking. Purpose: The purpose of this systematic review was to evaluate the accuracy of digital CDs and to summarize influencing factors. Material and methods: An electronic search of the English language literature from January 2009 to October 2019 was performed in the database PubMed/MEDLINE, with the results enriched by manual searches and citation mining. Factors investigated in the selected articles included the fabrication technique, type of computer-aided design and computer-aided manufacturing (CAD-CAM) system, shape of reference model, long-term service, analytical method, and statistical indicators. Results: A total of 522 articles were identified, of which 14 in vitro articles met the inclusion criteria. Eight articles compared the adaptation of the denture base between digital and conventional methods, 4 studies evaluated the occlusal discrepancies, 4 compared the trueness or adaptation of the denture fabricated with CAD-CAM milling and 3D printing, 1 compared the denture adaptation with 4 different CAD-CAM systems, and 2 evaluated the adaptation of the denture base before and after incubation in artificial saliva. Conclusions: Most of the studies reported clinically acceptable values for the occlusal trueness and adaptation of digital CDs. The digital CDs showed similar or better adaptation than conventionally fabricated CDs, and the greatest misfit of the intaglio surface was reported in the posterior palatal seal area and border seal area. The fabrication technique, CAD-CAM system, and long-term service were statistically significant in relation to denture accuracy. Clarification is needed concerning the accuracy of digital CDs according to the shape of the cast, the parameters related to the CAD-CAM process, the analytical method, and the statistical indicators. No clear conclusions can be drawn about the superiority of CAD-CAM milling and 3D printing regarding denture accuracy.
Spatial Trueness Evaluation of 3D-Printed Dental Model Made of Photopolymer Resin: Use of Special Structurized Dental Model

Aonan Wen,Ning Xiao,Yujia Zhu,Zixiang Gao,Qingzhao Qin,Shenyao Shan,Wenbo Li,Yuchun Sun,Yong Wang,Yijiao Zhao

DOI: https://doi.org/10.3390/polym16081083

IF: 5

2024-04-13

Polymers

Abstract:(1) Background: Various 3D printers are available for dental practice; however, a comprehensive accuracy evaluation method to effectively guide practitioners is lacking. This in vitro study aimed to propose an optimized method to evaluate the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a special structurized dental model, and provide the preliminary evaluation results of six 3D printers. (2) Methods: A structurized dental model comprising several geometrical configurations was designed based on dental crown and arch measurement data reported in previous studies. Ninety-six feature sizes can be directly measured on this original model with minimized manual measurement errors. Six types of photo-curing 3D printers, including Objet30 Pro using the Polyjet technique, Projet 3510 HD Plus using the Multijet technique, Perfactory DDP and DLP 800d using the DLP technique, Form2 and Form3 using the SLA technique, and each printer's respective 3D-printable dental model materials, were used to fabricate one set of physical models each. Regarding the feature sizes of the simulated dental crowns and dental arches, linear measurements were recorded. The scanned digital models were compared with the design data, and 3D form errors (including overall 3D deviation; flatness, parallelism, and perpendicularity errors) were measured. (3) Results: The lowest overall 3D deviation, flatness, parallelism, and perpendicularity errors were noted for the models printed using the Objet30 Pro (overall value: 45 μm), Form3 (0.061 ± 0.019 mm), Objet30 Pro (0.138 ± 0.068°), and Projet 3510 HD Plus (0.095 ± 0.070°), respectively. In color difference maps, different deformation patterns were observed in the printed models. The feature size proved most accurate for the Objet30 Pro fabricated models (occlusal plane error: 0.02 ± 0.36%, occlusogingival direction error: −0.06 ± 0.09%). (4) Conclusions: The authors investigated a novel evaluation approach for the spatial trueness of a 3D-printed dental model made of photopolymer resin based on a structurized dental model. This method can objectively and comprehensively evaluate the spatial trueness of 3D-printed dental models and has a good repeatability and generalizability.

polymer science
An in vitro comparison of the dimensional stability of four 3D-printed models under various storage conditions

Vanessa Knode,Björn Ludwig,Sinan Hamadeh,Nikolaos Pandis,Padhraig S Fleming,Padhraig S. Fleming

DOI: https://doi.org/10.2319/081223-557.1

2024-02-07

The Angle Orthodontist

Abstract:ABSTRACT Objectives To investigate the dimensional stability of various 3D-printed models derived from resin and plant-based, biodegradable plastics (PLA) under specific storage conditions for a period of up to 21 weeks. Materials and Methods Four different printing materials, including Draft V2, study model 2, and Ortho model OD01 resins as well as PLA mineral, were evaluated over a 21-week period. Eighty 3D-printed models were divided equally into two groups, with one group stored in darkness and the other exposed to daylight. All models were stored at a constant room temperature (20°C). Measurements were taken at 7-week intervals using the Inspect 3D module in OnyxCeph software (Image Instruments GmbH, Chemnitz, Germany). Results Dimensional change was noted for all of the models with shrinkage of up to 0.26 mm over the study period. Most contraction occured from baseline to T1, although significant further contraction also arose from T1 to T2 (P < .001) and T1 to T3 (P < .001). More shrinkage was observed when exposed to daylight overall and for each resin type (P < .01). The least shrinkage was noted with Ortho model OD01 resin (0.16 mm, SD = 0.06), and the highest level of shrinkage was observed for Draft V2 resin (0.23 mm, SD = 0.06; P < .001). Conclusions Shrinkage of 3D-printed models is pervasive, arising regardless of the material used (PLA or resin) and being independent of the brand or storage conditions. Consequently, immediate utilization of 3D printing for orthodontic appliance purposes may be preferable, with prolonged storage risking the manufacture of inaccurate orthodontic retainers and appliances.

dentistry, oral surgery & medicine
Effect of Abutment Tooth Geometry On The Accuracy of Fixed Prosthodontics Casts Obtained by Digital and Analog Workflows—In Vitro Study

Hian Parize,Ana Paula Macedo,Bruno Frazão Gribel,Lauren Bohner,Mauricio Martins Provinciatti,Valdir Antonio Muglia

DOI: https://doi.org/10.1111/jerd.13375

2024-12-01

Journal of Esthetic and Restorative Dentistry

Abstract:Objective Physical and digital casts are required for fixed dental prosthesis (FDP) fabrication. However, the effect of abutment tooth geometry on the accuracy of FDP casts obtained by digital and analog workflows remains unclear. This study evaluated the accuracy of obtaining dental casts for veneer and full crowns with digital and analog workflows. Materials and Methods A typodont model of the maxilla with unprepared teeth and veneer and full crown preparations was digitalized with intraoral scanning (TRIOS 3; 3Shape), digital model (DM) group, and the digital files were exported to two additive manufacturing technologies, resulting in the groups digital light processing (DLP) (Hunter; FlashForge) and polyjet (PLJ) (Eden 500 V; Stratasys). In addition, plaster casts (PCs) were obtained with polyvinyl siloxane (Express XT; 3M ESPE) double impressions and type IV plaster (FujiRock; GC America) as a control group. The sample size per group (n = 6) was defined in the pilot study. The digitization of the typodont and experimental casts was performed with a laboratory scanner (inEos X5; Dentsply Sirona). The measurement deviation (trueness and precision) to the reference model was performed with reverse engineering software (Geomagic Control X 2018; 3D Systems). Two‐way ANOVA was used to assess the effect of manufacturing techniques and abutment tooth geometry on model accuracy (primary outcome). In addition, one‐way ANOVA was used to assess significant differences between manufacturing techniques for complete arches, including abutments and unprepared teeth (secondary outcome). Tukey post hoc tests were used to compare means among groups. All statistical analyses considered a significant level of p ≤ 0.05. Results Statistically significant interactions were observed between manufacturing technique and abutment tooth geometry, affecting both trueness (p

dentistry, oral surgery & medicine
Application of Computer Aided Design and Fused Deposition Modeling Technology in the Digital Manufacture of Orthodontic Study Models

Siwei Wang,Min Li,Huifang Yang,Yi Liu,Yuchun Sun

2017-01-01

Abstract:Background: The orthodontic models can be divided into two categories, namely, working models and study models. Shaping study model is required for orthodontists. Traditionally, we shape the model with a trimmer or a base. The objective of this study was to establish the process of manufacturing orthodontic study models with the support of Computer-Aided Design (CAD) and Fused Deposition Modeling (FDM) technology, and to evaluate the accuracy of the whole process through comparing with traditional plaster models.Method: 15 sets of plaster models were divided into the mild crowding group (n=6), the moderate crowding group (n=9), and the severe crowding group (n=15). The surface data of plaster models, which was used to design the digital base in OrthoAnalyzer software, was obtained by a 3D model scanner. Through a chairside 3D printer, the designed models were converted into 3D printing models (3DP models). Linear measurements and 3D deviation analysis were taken on plaster models and 3DP models to evaluate the accuracy of the whole process.Results: Generally, 3DP models and plaster models demonstrated the same occlusion relationship and dental arch morphology. The Bland-Altman analysis results indicated that the 3DP models had excellent consistency with plaster models. The result of Kruskal-Wallis one-way analysis of variance demonstrated that the differences in crown width between the plaster models and the 3DP models among different groups showed no statistical significance (p=0.858, F=0.306).Conclusions: The environmentally-friendly and efficient manufacture process of orthodontic study model was established, and its accuracy satisfied the requirements of clinical application.
Refractory acute angle-closure glaucoma with retinal ischemia: January consultation #1.

T. Samuelson

DOI: https://doi.org/10.1016/j.jcrs.2016.01.022

Abstract:
Accuracy of five different 3D printing workflows for dental models comparing industrial and dental desktop printers

Belén Morón-Conejo,Jesús López-Vilagran,David Cáceres,Santiago Berrendero,Guillermo Pradíes

DOI: https://doi.org/10.1007/s00784-022-04809-y

Abstract:Objectives: The aim of this study was to evaluate the accuracy, in terms of trueness and precision, of printed models using five different industrial and dental desktop 3D printers. Materials and methods: Full-arch digital models with scanbodies of 15 patients were printed with five different 3D printers. The industrial printers were 3D system Project MJP2500 (3DS) and Objet30 OrthoDesk (Obj). The dental desktop printers were NextDent 5100 (ND), Formlabs Form 2 (FL) and Rapidshape D30 (RS). A total of 225 printed models were analysed. The printed models were digitized and compared with the reference cast model using the Control X software (Geomagic). The descriptive statistics and one-way ANOVA with the post hoc Tukey test were performed (α = 0.05). Results: The one-way ANOVA for the trueness and precision of the printed model presented the best results for the 3DS, followed by ND, Obj, FL and RS (P < 0.01). In the scanbody zone, the best results were for the 3DS group, followed by Obj, ND, FL and RS (P < 0.01). Comparing the technologies, the Multijet technology used in industrial printers presented better results than the DLP and SLA technologies used in dental desktop printers (P > 0.01). Conclusions: There were statistically significant differences in terms of the accuracy of the printed models, with better results for the industrial than the dental desktop 3D printers. Clinical relevance: The industrial 3D printers used in dental laboratories presented better accuracy than the in-office dental desktop 3D printers, and this should be considered when the best accuracy is needed to perform final prosthetic restorations.
Mechanical Properties of Additive-Manufactured Composite-Based Resins for Permanent Indirect Restorations: A Scoping Review

Giny Judith Pot,Patricia Anna Van Overschelde,Filip Keulemans,Cornelis Johannes Kleverlaan,João Paulo Mendes Tribst

DOI: https://doi.org/10.3390/ma17163951

2024-08-08

Abstract:The introduction of 3D printing technology in dentistry has opened new treatment options. The ongoing development of different materials for these printing purposes has recently enabled the production of definitive indirect restorations via 3D printing. To identify relevant data, a systematic search was conducted in three databases, namely PubMed, Scopus, and Web of Science. Additionally, a manual search using individual search terms was performed. Only English, peer-reviewed articles that encompassed in vitro or in vivo research on the mechanical properties of 3D-printed composite materials were included, provided they met the predefined inclusion and exclusion criteria. After screening 1142 research articles, 14 primary studies were selected. The included studies mainly utilized digital light processing (DLP) technology, less commonly stereolithography (SLA), and once PolyJet printing technology. The material properties of various composite resins, such as VarseoSmile Crown Plus (VSC) and Crowntec (CT), were studied, including Vickers hardness, flexural strength, elastic modulus, compressive strength, tensile strength, fracture resistance, and wear. The studies aimed to compare the behavior of the tested additive composites to each other, conventional composites, and subtractive-manufactured materials. This scoping review examined the mechanical properties of composites used for 3D printing of definitive restorations. The aim was to provide a comprehensive overview of the current knowledge on this topic and identify any gaps for future research. The findings suggest that 3D-printed composites are not yet the first option for indirect restorations, due to their insufficient mechanical properties. Due to limited evidence, more research is needed in this area. Specifically, there is a need for clinical trials and long-term in vivo research.
Effect of Model Body Type and Print Angle on the Accuracy of 3D-Printed Orthodontic Models

Stefan Lohfeld,Bryndon Belnap,Jean-Marc Retrouvey,Mary P. Walker

DOI: https://doi.org/10.3390/biomimetics9040217

2024-04-06

Biomimetics

Abstract:The assortment of low-cost 3D printers for “in-practice” use, e.g., for clear aligner therapies, is ever increasing. To address concerns about the accuracy of orthodontic models produced on such printers when cost-efficient modes of 3D printing are employed, this study examined the effect of print model body type and print angulation on accuracy. Six printing-configuration groups were included: two model types (solid or hollow shell) combined with three print angles (0°, 70°, or 90°) with 10 models/group; all models were printed with 100 μm layer thickness using a digital light processing-based three-dimensional printer. Eleven selected structures and distances were measured on the printed models with a digital microscope and compared to the same measures on a digitized master model. The clinically acceptable range was set at ±0.25 mm difference from the master model for single tooth measurements (intra-tooth) and ±0.5 mm for cross-arch measurements (inter-tooth). For individual measurements across all models, 98% fell within clinical acceptability. For mean measurements within each model group, only canine height for the shell-0° model had a mean difference (−0.26 mm ± 0.03) outside the clinically acceptable range for intra-tooth measurements. Standard deviations for all intra-tooth measurements were within 0.07 mm. While none of the mean inter-tooth measurements exceeded the acceptability range, the standard deviations were larger (0.04 to 0.30 mm). The accuracy of the orthodontic models for clear aligner therapies was not impacted beyond the clinically acceptable range when altering model body type and print angulation to improve efficiency of 3D printing. These findings suggest greater flexibility of the practitioner to alter print settings to address time and cost efficiency in various clinical scenarios and still maintain clinically acceptable model accuracy.
Accuracy of different tooth surfaces on 3D printed dental models: orthodontic perspective

Ting Dong,Xiaoting Wang,Lunguo Xia,Lingjun Yuan,Niansong Ye,Bing Fang

DOI: https://doi.org/10.1186/s12903-020-01338-6

2020-11-25

BMC Oral Health

Abstract:Abstract Background Few studies have been reported regarding the accuracy of 3D-printed models for orthodontic applications. The aim of this study was to assess the accuracy of 3D-printed dental models of different tooth surfaces. Methods Thirty volunteers were recruited from the hospital, and then their dental models were produced by means of oral scanning and a stereolithography-based 3D printer. Each printed model was digitally scanned and compared with the oral-scanned STL file via superimposition analysis. A color map was used to assess the accuracy of different surfaces (occlusal, buccal, lingual) of anterior and posterior teeth. The Tukey test was used to evaluate the differences between the superimposition. Results Statistically significant differences were found in the average deviations of different tooth surfaces ( P < 0.05). The mean average absolute deviations of the occlusal surfaces of posterior teeth were greater than those of other surfaces. Percentages of points beyond the upper and lower limits of different tooth surfaces displayed the same results ( P < 0.05). Conclusions Occlusal surfaces, especially pits and fissures of posterior teeth on 3D printed maxillary dental models, showed greater distortions than those of other teeth and regions.

dentistry, oral surgery & medicine

Informed consent issues hobble cancer genome scheme

Localized papular cutaneous schistosomiasis: two cases in travellers

Factors affecting accuracy in the additive manufacturing of interim dental prostheses: A systematic review

Effect of different storage conditions on dimensional accuracy of 3D‐printed dental models

Dimensional Accuracy of Dental Models for Three-Unit Prostheses Fabricated by Various 3D Printing Technologies

Effects of Post-Processing Parameters on 3D-Printed Dental Appliances: A Review

Clear guidance to select the most accurate technologies for 3D printing dental models - A network meta-analysis✰

Three-Dimensional Printing Technology in Orthodontics for Dental Models: A Systematic Review

A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations

Effect of aging on dimensional accuracy and color stability of CAD-CAM milled and 3D-printed denture base resins: a comparative in-vitro study

Evaluation of Three-Dimensional Digital Models Formulated From Direct Intra-oral Scanning of Dental Arches in Comparison With Extra-oral Scanning of Poured Dental Models in Terms of Dimensional Accuracy and Reliability

Accuracy of digital complete dentures: A systematic review of in vitro studies

Spatial Trueness Evaluation of 3D-Printed Dental Model Made of Photopolymer Resin: Use of Special Structurized Dental Model

An in vitro comparison of the dimensional stability of four 3D-printed models under various storage conditions

Effect of Abutment Tooth Geometry On The Accuracy of Fixed Prosthodontics Casts Obtained by Digital and Analog Workflows—In Vitro Study

Application of Computer Aided Design and Fused Deposition Modeling Technology in the Digital Manufacture of Orthodontic Study Models

Refractory acute angle-closure glaucoma with retinal ischemia: January consultation #1.

Accuracy of five different 3D printing workflows for dental models comparing industrial and dental desktop printers

Mechanical Properties of Additive-Manufactured Composite-Based Resins for Permanent Indirect Restorations: A Scoping Review

Effect of Model Body Type and Print Angle on the Accuracy of 3D-Printed Orthodontic Models

Accuracy of different tooth surfaces on 3D printed dental models: orthodontic perspective