Abstract:Silver nanowires (Ag NWs) are highly promising building blocks for developing transparent conducting films (TCFs) due to their high electrical conductivity and good optical transparency. The large-scale production of Ag NW-based high-quality TCFs using low-cost processing methods can replace the traditional oxide based TCFs. Therefore, developing a reliable technique for large-scale fabrication of Ag NW-based TCFs is vital. This work involves the synthesis of Ag NWs, the fabrication of large-area Ag NW-based TCFs using a simple rod coating process, its optimization, and the performance analysis of the fabricated TCFs, including their demonstration as transparent heaters. The polyol synthesis method produces Ag NWs of lengths ranging from 25 – 110 μm and diameters from 80 – 180 nm. The effect of Ag NW length, the number of coating passes, and the volume of the NW dispersion used per coating pass on the electrical and optical properties of the TCFs are studied by quantifying sheet resistance (Rs) and transmittance (T) of the film. The performance of the fabricated film is evaluated by estimating the figure of merit (FoM) in both percolative and bulk regimes. The TCF made with NWs of length 25.7 μm and diameter 85.1 nm had the largest value of bulk FoM (101.3), percolative FoM (43.9), and, conductivity exponent (0.6). This elucidated the superior performance of the fabricated TCFs over those fabricated by other techniques. The critical thickness of the film (tmin), at the crossover between the percolation and bulk, scales with the shortest dimension of the NW, namely its diameter. The percolative FoM showed an increase, with a decrease in both sheet resistance and diameter of the NWs, with lower n. The fabricated TCF is tested as a transparent heater and the demonstration proves that rod coated Ag NW-based TCFs can be used for transparent electrode applications.

Room Temperature Curable Copper Nanowire-Based Transparent Heater

Investigating the optical and electrical performance of rod coated silver nanowire-based transparent conducting films

Novel Facile Synthesis and Room-Temperature Sintering of Copper Nanowires for Solution-Processed Transparent Conductive Films

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating

High-efficiency Extraction Synthesis for High-Purity Copper Nanowires and Their Applications in Flexible Transparent Electrodes

Electrodeposition Fabrication of Cu@Ni Core Shell Nanowire Network for Highly Stable Transparent Conductive Films

Fast Fabrication Of Copper Nanowire Transparent Electrodes By A High Intensity Pulsed Light Sintering Technique In Air

Indium-free flexible NiO/Ag NW composite transparent conductive thin films for transparent heater

Dry-transferred Single-Walled Carbon Nanotube Thin Films for Flexible and Transparent Heaters

Ultraflexible transparent conductive films based on Ag nanowires for use in quick thermal response transparent heater

Self-Limited Nanosoldering of Silver Nanowires for High-Performance Flexible Transparent Heaters

Enhanced oxidation-resistant Cu–Ni core–shell nanowires: controllable one-pot synthesis and solution processing to transparent flexible heaters

Fabrication of Stabilized and Dispersive Copper Nanowires Ink

Highly Conductive and Transparent Copper Nanowire Electrodes on Surface Coated Flexible and Heat-Sensitive Substrates

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles

Electroplating Enhanced Silver Nanowire Networks for Transparent Heaters

Flexible transparent film heaters using a ternary composite of silver nanowire, conducting polymer, and conductive oxide

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Optoelectronic and Electrothermal Properties of Transparent Conductive Silver Nanowires Films

Flexible high-performance SnO2/AgNWs bilayer transparent conductors for flexible transparent heater applications