Abstract:Background Dose area product in water (DAPw) in small fields relies on the use of detectors with a sensitive area larger than the irradiation field. This quantity has recently been used to establish primary standards down to 5 mm field size, with an uncertainty smaller than 0.7%. It has the potential to decrease the uncertainty related to field output factors, but is not currently integrated into treatment planning systems. Purpose This study aimed to explore the feasibility of converting DAPw into a point dose in small fields by determining the volume averaging correction factor. By determining the field output factors, a comparison between the so‐called "DAPw to point dose" approach and the IAEA TRS483 methodology was performed. Method Diodes, microdiamonds, and a micro ionization chamber were used to measure field output factors following the IAEA TRS483 methodology on two similar linacs equipped with circular cones down to 6 mm diameter. For the "DAPw to point dose" approach, measurements were performed with a dedicated and built‐in‐house 3 cm diameter plane‐parallel ionization chamber calibrated in terms of DAPw in the French Primary Dosimetry Standards Laboratory LNE‐LNHB. Beam profile measurements were performed to generate volume averaging correction factors enabling the conversion of an integral DAPw measurement into a point dose and the determination of the field output factors. Both sets of field output factors were compared. Results According to the IAEA TRS483 methodology, field output factors were within ±3% for all detectors on both linacs. Large variations were observed for the volume averaging correction factors with a maximum spread between the detectors of 26% for the smallest field size. Consequently, deviations of up to 15% between the "IAEA TRS483" and the "DAPw to point dose" methodologies were found for the field output factor of the smallest field size. This was attributed to the difficulty in accurately determining beam profiles in small fields. Conclusion Although primary standards associated with small uncertainties can be established in terms of DAPw in a primary laboratory, the "DAPw to point dose" methodology requires volume averaging correction to derive a field output factor from DAPw measurements. None of the point detectors studied provided satisfactory results, and additional work using other detectors, such as film, is still required to allow the transfer of a DAP primary standard to users in terms of absorbed point dose.

Feasibility of Reducing Animal Numbers in Radiation Countermeasure Experiments from Historic Levels when using Sample Size Calculations

How much confidence do we need in animal experiments? Statistical assumptions in sample size estimation

Sample-size calculation for preclinical dose-response experiments using heterogeneous tumour models

Seamless Phase II/III Design: a Useful Strategy to Reduce the Sample Size for Dose Optimization

Practical Sample Size Calculations for Surveillance and Diagnostic Investigations

A Bayesian Quasi-Likelihood Design for Identifying the Minimum Effective Dose and Maximum Utility Dose in Dose-Ranging Studies

Sample Size Estimation in Veterinary Epidemiologic Research

Know your dose: RADDOSE

Defining field output factors in small fields based on dose area product measurements: A feasibility study

Age-dependent small-animal internal radiation dosimetry

The 3 + 3 design in dose-finding studies with small sample sizes: Pitfalls and possible remedies

The Double Threshold: Consequences for Identifying Low-Dose Radiation Effects

Effect size, sample size and power of forced swim test assays in mice: Guidelines for investigators to optimize reproducibility

Power/sample size calculations for assessing correlates of risk in clinical efficacy trials

Research on the Radiotoxicology of Plutonium Using Animals: Consideration of the 3Rs—Replace, Reduce, Refine

Sample Size Estimation for Random-effects Models: Balancing Precision and Feasibility in Panel Studies

A methodology to abridge microdosimetric distributions without a significant loss of the spectral information needed for the RBE computation in carbon ion therapy

Replace the Linear No-threshold Model with a Risk-informed Targeted Approach to Radiation Protection

A Multiple Parameters Biodosimetry Tool with Various Blood Cell Counts - the Hemodose Approach

Interlaboratory comparison of high-throughput protein biomarker assay quantifications for radiation exposure classification

Old enemy, new threat: you can't solve today's problems with yesterday's solution