Abstract:Space-selective laser-induced crystallization of glass enables direct femtosecond laser writing of crystal-in-glass channel waveguides having nearly single-crystal structure and consisting of functional phases with favorable nonlinear optical or electrooptical properties. They are regarded as promising components for novel integrated optical circuits. However, femtosecond-laser-written continuous crystalline tracks typically have an asymmetric and strongly elongated cross-section, which causes a multimode character of light guiding and substantial coupling losses. Here, we investigated the conditions of partial remelting of laser-written LaBGeO5 crystalline tracks in lanthanum borogermanate glass by the same femtosecond laser beam which had been used for their writing. Exposure to femtosecond laser pulses at 200 kHz repetition rate provided cumulative heating of the sample in the vicinity of the beam waist sufficient to provide space-selective melting of crystalline LaBGeO5. To form a smoother temperature field, the beam waist was moved along the helical or flat sinusoidal path along the track. The sinusoidal path was shown to be favorable for tailoring the improved cross-section of the crystalline lines by partial remelting. At optimized laser processing parameters, most of the track was vitrified, and the residual part of the crystalline cross-section had an aspect ratio of about 1:1. Thermal-induced stress emerging during the tailoring procedure was efficiently eliminated by fine post-annealing. The proposed technique suggests a new way to control the morphology of laser-written crystal-in-glass waveguides by tailoring their cross-section, which is expected to improve the mode structure of the guided light.

Ultrafast laser writing of arbitrary long low-loss waveguides in optical fibers

Optical loss measurements in femtosecond laser written waveguides in glass

Femtosecond laser writing of robust waveguides in optical fibers with enhanced photosensitivity

3D Laser Writing of Low‐Loss Cross‐Section‐Variable Type‐I Optical Waveguide Passive/Active Integrated Devices in Single Crystals

Femtosecond laser written low-loss multiscan waveguides in fused silica

Single-step fabrication of surface waveguides in fused silica with few-cycle laser pulses

Ultrafast Laser-Fabricated Fluoride Glass Waveguides with Exceptionally High Refractive Index Change for Mid-Infrared Integrated Optics

Low Bend Loss, High Index, Composite Morphology Ultra-fast Laser Written Waveguides for Photonic Integrated Circuits

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

Femtosecond-laser-written Microstructured Waveguides in BK7 Glass

Direct laser written polymer waveguides with out of plane couplers for optical chips

Fabricating Low Loss Waveguides over a Large Depth in Glass by Temperature Gradient Assisted Femtosecond Laser Writing.

Effectively Writing Low Propagation and Bend Loss Waveguides in the Silica Glass by Using a Femtosecond Laser.

From near-UV to long-wave infrared waveguides inscribed in barium fluoride using a femtosecond laser

Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Photowritten Optical Waveguides in Various Glasses with Ultrashort Pulse Laser

Fabrication of polarization-independent waveguides deeply buried in crystal using aberration-corrected femtosecond laser direct writing

Low-loss optofluidic waveguides in fused silica enabled by spatially shaped femtosecond laser assisted etching combined with carbon dioxide laser irradiation

Ultrafast-Laser-Induced Tailoring of Crystal-in-Glass Waveguides by Precision Partial Remelting

Fabrication of Polarization-Independent Waveguides Deeply Buried in Lithium Niobate Crystal Using Aberration-Corrected Femtosecond Laser Direct Writing