Abstract:Lithium-sulfur (Li-S) battery is attracting increasing interest for its potential in low-cost high-density energy storage. However, it has been a persistent challenge to simultaneously realize high energy density and long cycle life. Herein, we report a synergistic strategy to exploit a unique nitrogen-doped three-dimensional graphene aerogel as both the lithium anode host to ensure homogeneous lithium plating/stripping and mitigate lithium dendrite formation and the sulfur cathode host to facilitate efficient sulfur redox chemistry and combat undesirable polysulfide shuttling effect, realizing Li-S battery simultaneously with ultrahigh energy density and long cycle life. The as-demonstrated polysulfide-based device delivers a high areal capacity of 7.5 mAh/cm2 (corresponds to 787 Wh/L) and an ultralow capacity fading of 0.025% per cycle over 1000 cycles at a high current density of 8.6 mA/cm2. Our findings suggest a novel strategy to scale up the superior electrochemical property of every microscopic unit to a macroscopic-level performance that enables simultaneously high areal energy density and long cycling stability that are critical for practical Li-S batteries. An overarching strategy was proposed to synergistically densify the sulfur cathode and stabilize the lithium anode by using a three-dimensional graphene architecture. Benefiting from the unique structural properties to suppress the lithium dendrite growth and overcome the major limitations associated with dense and thick sulfur cathode, a high energy density yet long cycle life Li-S battery is fabricated. image

Greenly Growing Carbon Nanotubes on Graphene for High-performance Lithium-Sulfur Batteries

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Facile Solid‐State Growth of 3D Well‐Interconnected Nitrogen‐Rich Carbon Nanotube–Graphene Hybrid Architectures for Lithium–Sulfur Batteries

Enhanced Performance of Lithium–Sulfur Batteries Using Construction Wastes: A Sustainable Approach to High‐Loading Sulfur Cathodes

High Performance Lithium-Sulfur Batteries by Facilely Coating a Conductive Carbon Nanotube or Graphene Layer

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Waste to Wealth: One‐Step Exfoliating of Spent Graphite to Build a Low‐Cost Cathode for Lithium–Sulfur Batteries

Capillarity Composited Recycled Paper/Graphene Scaffold for Lithium-Sulfur Batteries with Enhanced Capacity and Extended Lifespan

Chemically Functionalized Graphene for High Performance Lithium/Sulfur Batteries

High-performance Li-ion Batteries Based on Graphene Quantum Dot Wrapped Carbon Nanotube Hybrid Anodes

Renewed graphite for high-performance lithium-ion batteries: catalytic graphitization approach

Catalyzing polysulfide conversion by g-C 3 N 4 in a graphene network for long-life lithium-sulfur batteries

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Spheres of Graphene and Carbon Nanotubes Embedding Silicon as Mechanically Resilient Anodes for Lithium-Ion Batteries.

High-rate, Ultralong Cycle-Life Lithium/sulfur Batteries Enabled by Nitrogen-Doped Graphene.

Lithium–Sulfur Batteries: Facile Solid‐State Growth of 3D Well‐Interconnected Nitrogen‐Rich Carbon Nanotube–Graphene Hybrid Architectures for Lithium–Sulfur Batteries (adv. Funct. Mater. 7/2016)

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

Upcycling Spent Graphite into Fast-Charging Anode Materials Through Interface Regulation

Self-Templated Formation of Carbon Nanotubes Interpenetrating Ordered Microporous Carbon Nanospheres for High-Performance Li–S Batteries

Implanting CNT Forest onto Carbon Nanosheets as Multifunctional Hosts for High-Performance Lithium Metal Batteries

In Situ Generation of Co-Decorated Carbon Nanotubes by Zeolitic Imidazolate Frameworks to Facilitate High-Performance Lithium–Sulfur Batteries