Abstract:Lithium–sulfur batteries (LSBs) are expected to be one of the most promising next-generation energy storage systems due to their high energy density and theoretical specific capacity. However, the poor electrical conductivity, significant volume expansion during discharging, and "shuttle effect" of lithium polysulfides (LiPSs) have seriously impeded the further development of LSBs. Herein, inspired by the "lotus blooming" procedure, a 3D composite host material made up of cobalt nanocrystals/carbon nanosheets/carbon nanotubes (Co/CNS/CNT) is synthesized by in situ growth of CNTs to exfoliate off ultrathin CNSs from 0D precursors in a one-step method. As expected, the 3D structure of Co/CNS/CNT provides horizontal and vertical transmission channels for electrons/ions and is conducive to the uniform loading of sulfur and infiltration of the electrolyte. Furthermore, the Co/CNS/CNT host material realizes the synergistic effect of physical and chemical adsorption/catalysis through its 3D structure and fine Co nanocrystals. The Co/CNS/CNT-S cathode shows excellent cycle performance (after 500 cycles at a current density of 1C, the remaining capacity is 660.6 mAh g–1, and the capacity decay rate per cycle is only 0.06%). This work achieves the transformation of 0D precursors into a 3D framework through a facile strategy, which has great application potential in LSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02162.Experimental section; TEM images of PAA-NH4 NSs; the pore size distribution of the Co/CNS/CNT; TGA curve of (A) CNS/CNT-S and (B) CNS-S under a N2 atmosphere from room temperature to 700 °C; TEM images of (A) CNS/CNT and (C) CNS; SEM images of (B) CNS/CNT and (D) CNS; Co/CNS/CNT, CNS/CNT, and CNS adsorption capacity test in 5 mL of a mixed solution of DME/DOL and 2 mM Li2S6; galvanostatic discharge–charge profiles of the (A) CNS/CNT-S and (B) CNS-S cathodes at different rates from 0.1 to 2.0C; SEM images and separator photos from the disassembled Li–S cell after 200 cycles at 1C with different cathodes: (A) Co/CNS/CNT-S, (B) CNS/CNT-S, and (C) CNS-S; and performance comparison of the Co/CNS/CNT-S with other composite host materials containing element Co (PDF)This article has not yet been cited by other publications.

Lithium–Sulfur Batteries: Facile Solid‐State Growth of 3D Well‐Interconnected Nitrogen‐Rich Carbon Nanotube–Graphene Hybrid Architectures for Lithium–Sulfur Batteries (adv. Funct. Mater. 7/2016)

Facile Solid‐State Growth of 3D Well‐Interconnected Nitrogen‐Rich Carbon Nanotube–Graphene Hybrid Architectures for Lithium–Sulfur Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Carbon: Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries (adv. Funct. Mater. 19/2014)

Lithium‐Sulfur Batteries: 3D Vertically Aligned and Interconnected Porous Carbon Nanosheets As Sulfur Immobilizers for High Performance Lithium‐Sulfur Batteries (adv. Energy Mater. 12/2016)

3D, Mutually Embedded MOF@Carbon Nanotube Hybrid Networks for High‐Performance Lithium‐Sulfur Batteries

Batteries: A 3D Hybrid of Chemically Coupled Nickel Sulfide and Hollow Carbon Spheres for High Performance Lithium–Sulfur Batteries (adv. Funct. Mater. 33/2017)

Preparation of Three-dimensional Nitrogen-doped Carbon Nanoribbon and Application in Lithium/Sulfur Batteries

Bi-structural fibers of carbon nanotube coated with nitrogen/oxygen dual-doped porous carbon layer as superior sulfur host for lithium-sulfur batteries

A Free-Standing Sulfur/Nitrogen-Doped Carbon Nanotube Electrode for High-Performance Lithium/Sulfur Batteries

In Situ Generation of Co-Decorated Carbon Nanotubes by Zeolitic Imidazolate Frameworks to Facilitate High-Performance Lithium–Sulfur Batteries

Facile “Lotus Blooming” Strategy to Synthesize a 3D Carbon Nanosheet/Carbon Nanotube Framework with Embedded Co Nanocrystals for High-Performance Lithium–Sulfur Batteries

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries.

Super-aligned carbon nanotube/graphene hybrid materials as a framework for sulfur cathodes in high performance lithium sulfur batteries

Nano-sulfur confined in a 3D carbon nanotube/graphene network as a free-standing cathode for high-performance Li–S batteries

Nitrogen-Doped 3d Carbon Hybrids Based on Modified Lignin As Sulfur Host for High-Performance Lithium-Sulfur Batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Three-Dimensional Functionalized Carbon Nanotubes/Graphitic Carbon Nitride Hybrid Composite as the Sulfur Host for High-Performance Lithium–Sulfur Batteries

A Nitrogen-Rich Carbon Welded Multi-Dimensional Architecture for High Mass Loading Sulfur Cathode