Abstract:Lithium/sulfur (Li-S) batteries have recently attracted intensive research interests due to their high theoretical specific energy of 2600 W.h.kg(-1). However, the poor electronic conductivity of sulfur and the high solubility of polysulfides in organic electrolytes lead to poor cycling stability and rate capability. Herein, we report a three-dimensional (3D) nanocomposite network made from nitrogen-doped carbon nanoribbon (NCNB) and nitrogen-doped graphene (NG), which has a high electronic conductivity and can serve as a conductive matrix and a sulfur immobilizer for the sulfur cathode. The NCNB is prepared by thermal nitridation of a unique 3D phenolic resin (PHF) isolated from the polycondensation reaction of 1,4-hydroquinone and formaldehyde. The N content of NCNB-NG can reach as high as 9.7 wt%. Although three types of N bonding geometries, including pyridinic N, pyrrolic N, and graphitic N, are identified in the NCNB-NG composites, we found the pyridinic N is dominant, which facilitates the trapping of intermediate lithium polysulfides. The sulfur was loaded on NCNB-NG by using a Na2S2O3 solution as sulfur source. The scanning electron microscope (SEM) images show that almost no large S particle can be observed in the as-prepared S@NCNB-NG nanocomposites, suggesting a uniform coating of S on the NCNB-NG networks. The transmission electron microscopic (TEM) images and the elemental mapping by Energy-Dispersive X-ray (EDX) analysis also show that nano-sized S particles are uniformly distributed on the NCNB-NG matrix. The as-obtained S@NCNB-NG cathode can deliver a high specific capacity of 1338 mA.h.g(-1) at 0.05 C with about 80% S utilization. It also exhibits excellent rate capability and good cycle stability with a retained specific capacity of 556 mA.h.g(-1) after 300th cycles. These performances are much higher than the control samples using the S@NCNB and the S@PHF nanocomposites as cathodes. The improved performance can be attributed to the unique microstructure and the improved electronic conductivity of the NCNB-NG matrix.

Preparation of Three-dimensional Nitrogen-doped Carbon Nanoribbon and Application in Lithium/Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Nitrogen-doped Porous Carbon Nanofiber Webs/sulfur Composites As Cathode Materials for Lithium-Sulfur Batteries

Nitrogen Doped Carbon Nanosheets Encapsulated in Situ Generated Sulfur Enable High Capacity and Superior Rate Cathode for Li-S Batteries

Ni@Ni 3 N Embedded on Three-Dimensional Carbon Nanosheets for High-Performance Lithium/Sodium–Sulfur Batteries

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Three-Dimensional Functionalized Carbon Nanotubes/Graphitic Carbon Nitride Hybrid Composite as the Sulfur Host for High-Performance Lithium–Sulfur Batteries

A Nitrogen-Rich Carbon Welded Multi-Dimensional Architecture for High Mass Loading Sulfur Cathode

Self-Supported Hierarchically Porous 3d Carbon Nanofiber Network Comprising Ni/Co/Nico2o4 Nanocrystals and Hollow N-Doped C Nanocages as Sulfur Host for Highly Reversible Li–S Batteries

High Sulfur Loading Composite Wrapped By 3d Nitrogen-Doped Graphene As A Cathode Material For Lithium-Sulfur Batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Nickel Hollow Spheres Concatenated by Nitrogen‐Doped Carbon Fibers for Enhancing Electrochemical Kinetics of Sodium–Sulfur Batteries

Nanoconfined Antimony in Sulfur and Nitrogen Co-Doped Three-Dimensionally (3d) Interconnected Macroporous Carbon for High-Performance Sodium-Ion Batteries

Nano-sulfur confined in a 3D carbon nanotube/graphene network as a free-standing cathode for high-performance Li–S batteries

In Situ Polymerization of Nanostructured Conductive Polymer on 3D Sulfur/Carbon Nanofiber Composite Network as Cathode for High‐Performance Lithium–Sulfur Batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Nitrogen-doped cross-linked carbon nanosheets-loaded CdB 2 O 4 nanoparticles as efficient sulfur host for lithium–sulfur battery

NiCo2S4 nanoparticles embedded in nitrogen-doped carbon nanotubes networks as effective sulfur carriers for advanced Lithium–Sulfur batteries

In Situ Generation of Co-Decorated Carbon Nanotubes by Zeolitic Imidazolate Frameworks to Facilitate High-Performance Lithium–Sulfur Batteries