Abstract:Lithium–sulfur batteries (LSBs) are expected to be one of the most promising next-generation energy storage systems due to their high energy density and theoretical specific capacity. However, the poor electrical conductivity, significant volume expansion during discharging, and "shuttle effect" of lithium polysulfides (LiPSs) have seriously impeded the further development of LSBs. Herein, inspired by the "lotus blooming" procedure, a 3D composite host material made up of cobalt nanocrystals/carbon nanosheets/carbon nanotubes (Co/CNS/CNT) is synthesized by in situ growth of CNTs to exfoliate off ultrathin CNSs from 0D precursors in a one-step method. As expected, the 3D structure of Co/CNS/CNT provides horizontal and vertical transmission channels for electrons/ions and is conducive to the uniform loading of sulfur and infiltration of the electrolyte. Furthermore, the Co/CNS/CNT host material realizes the synergistic effect of physical and chemical adsorption/catalysis through its 3D structure and fine Co nanocrystals. The Co/CNS/CNT-S cathode shows excellent cycle performance (after 500 cycles at a current density of 1C, the remaining capacity is 660.6 mAh g–1, and the capacity decay rate per cycle is only 0.06%). This work achieves the transformation of 0D precursors into a 3D framework through a facile strategy, which has great application potential in LSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02162.Experimental section; TEM images of PAA-NH4 NSs; the pore size distribution of the Co/CNS/CNT; TGA curve of (A) CNS/CNT-S and (B) CNS-S under a N2 atmosphere from room temperature to 700 °C; TEM images of (A) CNS/CNT and (C) CNS; SEM images of (B) CNS/CNT and (D) CNS; Co/CNS/CNT, CNS/CNT, and CNS adsorption capacity test in 5 mL of a mixed solution of DME/DOL and 2 mM Li2S6; galvanostatic discharge–charge profiles of the (A) CNS/CNT-S and (B) CNS-S cathodes at different rates from 0.1 to 2.0C; SEM images and separator photos from the disassembled Li–S cell after 200 cycles at 1C with different cathodes: (A) Co/CNS/CNT-S, (B) CNS/CNT-S, and (C) CNS-S; and performance comparison of the Co/CNS/CNT-S with other composite host materials containing element Co (PDF)This article has not yet been cited by other publications.

Self-Supported Hierarchically Porous 3d Carbon Nanofiber Network Comprising Ni/Co/Nico2o4 Nanocrystals and Hollow N-Doped C Nanocages as Sulfur Host for Highly Reversible Li–S Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Porous NiCo 2 S 4 Nanoneedle Arrays with Highly Efficient Electrocatalysis Anchored on Carbon Cloths as Self-Supported Hosts for High-Loading Li–S Batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries

High-Entropy Metal Nitride Embedded in Concave Porous Carbon Enabling Polysulfide Conversion in Lithium-Sulfur Batteries

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

3D Hierarchical Mesoporous Carbon with P and N Dual-doped as Electrocatalyst Host for High-performance Li-S Batteries

Preparation of Three-dimensional Nitrogen-doped Carbon Nanoribbon and Application in Lithium/Sulfur Batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Hierarchically porous, ultrathin N–doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium–sulfur batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries.

Co/Co3O4-embedded N-doped hollow carbon composite derived from a bimetallic MOF/ZnO Core-shell template as a sulfur host for Li-S batteries

Carbon Nitride-Based Hollow Sphere As Polysulfides-Shuttle Restricting Host for Lithium Sulfur Battery

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

Self‐Supporting Carbon Nanofibers with Ni‐Single‐Atoms and Uniformly Dispersed Ni‐Nanoparticles as Scalable Multifunctional Hosts for High Energy Density Lithium‐Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Facile “Lotus Blooming” Strategy to Synthesize a 3D Carbon Nanosheet/Carbon Nanotube Framework with Embedded Co Nanocrystals for High-Performance Lithium–Sulfur Batteries