Abstract:Alkaline sodium hydroxide/sodium silicate-activating high-purity metakaolin geopolymerization is described in terms of metakaolin deconstruction in tetrahedral hydrate silicate [O[Si(OH)3]]− and aluminate [Al(OH)4]− ionic precursors followed by their reassembling in linear and branched sialates monomers that randomly copolymerize into an irregular crosslinked aluminosilicate network. The novelty of the approach resides in the concurrent thermo-calorimetric (differential scanning calorimetry, DSC) and rheological (dynamic mechanical analysis, DMA) characterizations of the liquid slurry during the transformation into a gel and a structural glassy solid. Tests were run either in temperature scan (1 °C/min) or isothermal (20 °C, 30 °C, 40 °C) cure conditions. A Gaussian functions deconvolution method has been applied to the DSC multi-peak thermograms to separate the kinetic contributions of the oligomer's concurrent reactions. DSC thermograms of all tested materials are well-fitted by a combination of three overlapping Gaussian curves that are associated with the initial linear low-molecular-weight (Mw) oligomers (P1) formation, oligomers branching into alumina-rich and silica-rich gels (P2), and inter- and intra-molecular crosslinking (P3). The loss factor has been used to define viscoelastic behavioral zones for each DMA rheo-thermogram operated in the same DSC thermal conditions. Macromolecular evolution and viscoelastic properties have been obtained by pairing the deconvoluted DSC thermograms with the viscoelastic behavioral zones of the DMA rheo-thermograms. Two main chemorheological behaviors have been identified relative to pre- and post-gelation separation of the viscoelastic liquid from the viscoelastic solid. Each comprises three behavioral zones, accounting for the concurrently occurring linear and branching oligomerization, aluminate-rich and silica-rich gel nucleations, crosslinking, and vitrification. A "rubbery plateau" in the loss factor path, observed for all the testing conditions, identifies a large behavioral transition zone dividing the incipient gelling liquid slurry from the material hard setting and vitrification.

Molecular simulations of the initial stage's induction and formation process of N-A-S-H Gel based on NaOH-activated Metakaolin

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

Mechanistic understanding of geopolymerization at the initial stage: Ab initio molecular dynamics simulations

Mechanical Properties and Reaction Kinetics of Alkali-Activated Metakaolin

Molecular dynamics simulation of the initial stage induction of alkali-activated aluminosilicate minerals

Nano-scale study on molecular structure, thermal stability, and mechanical properties of geopolymer

Modeling the Polymerization Process for Geopolymer Synthesis Through Reactive Molecular Dynamics Simulations

Exploring the chemistry of metakaolin-based geopolymers

Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Dissolution behaviors and mechanisms of metakaolin in acidic activators

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Molecular insights into the microstructure, dynamics, wettability and mechanical properties of sodium aluminum silicate hydrate with saturated nanopores

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Effects SiO2/Na2O molar ratio on mechanical properties and the microstructure of nano-SiO2 metakaolin-based geopolymers

Effect of Na + alkaline activation on the geopolymerization of a pure metakaolin at room temperature

Preparation and properties of metakaolin-fumed-silica geopolymer modified with sodium silicate and potassium silicate activators

A molecular dynamics study of N‐A‐S‐H gel with various Si/Al ratios