Abstract:Metallic mirror is the core component of the imaging system in the reflective astronomical telescope.However,because the telescopes are usually located in the wild,they are often contaminated by dust and other pollutants which will greatly reduce the imaging quality.Therefore,the surface of reflective mirror in telescope should be cleaned routinely in order to recover high performance of telescope.Currently,the artificial ice cleaning is the most common method employed in the cleaning of mirror surface,which is complicated and costly.Besides,the micron particles adhered on the surface of the mirror are especially difficult to be removed by dry ice flow when their diameters are less than 20 μtm because of the Van der Waals' force between the particles and metal mirror.Moreover,an ordinary method with wipe and cleanser is also used in which the friction between wipe and mirror may damage the telescope.To overcome these shortcomings,this work proposed a laser cleaning strategy in which amplified femtosecond pulsed lasers was used to clean the reflecting mirror surface.As a new cleaning method,laser cleaning technology which is non-contact and frictionless has been applied successfully in the cleaning of industrial molds,buildings,precision machinery components.For the advantages of femtosecond laser,such as short pulse duration,small thermal effects,high pulse energy,it has been used in the cleaning of cultural relics and has good achievement in recent years.This article firstly studied the interaction between the femtosecond laser and the reflective aluminum mirror.The laser damage threshold of aluminum mirror was measured about 60 mJ/cm2,which would reduce to 57 mJ/cm2 for dirty mirror because of the microparticles adhered on the surface of reflector mirror.Then,by optimizing laser parameters including the scan rate,the scan pitch,and the laser energy,it could be found that when the laser energy density ranges from 30 to 55 mJ/cm2,micron dust particles with diameters less than 20 μm on mirror surface could be cleaned with excellent clean effect and the reflectivity in the visible light region has been greatly improved.Finally,through the dust particles and aluminum mirror substrate spectrum analysis,we ruled out that the removed microparticles were thermal melted by laser energy.The results indicated that thermal expansion plays the key role in laser cleaning of metal mirror.This work shows that femtosecond laser cleaning has a good effect on the removing of micron particles.As a simple and easy way,femtosecond laser cleaning has a good prospect in cleaning of astronomical telescope.

Surface modification of ITER-like mirrors after one hundred cleaning cycles using radio-frequency plasma

Morphological modification of Rh-C coatings upon low-energy Ar + ion sputtering

Laser damage thresholds of ITER mirror materials and first results on in situ laser cleaning of stainless steel mirrors

RF discharge for in situ mirror surface recovery in ITER

Towards chemically neutral carbon cleaning processes: Plasma cleaning of Ni, Rh, and Al reflective optical coatings and thin Al filters for Free Electron Lasers and synchrotron beamline applications

Deuterium as a cleaning gas for ITER first mirrors: experimental study on beryllium deposits from laboratory and JET-ILW

Femtosecond Laser Cleaning the Surface of Reflective Mirror in Telescope

In-situ non-destructive removal of tin particles by low-energy plasma for imitation of EUV optical mirrors self-cleaning

Investigation of electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

Nonequilibrium Plasma Cleaning of Organic Contaminants on the Surface of Diffraction Gratings

Multi-staged ERO2.0 simulation of material erosion and deposition in recessed mirror assemblies in JET and ITER

Improvement of the optical properties after surface error correction of aluminium mirror surfaces

Surface Degradation of Thin-Layer Al/MgF2 Mirrors under Exposure to Powerful VUV Radiation

Characterization of Carbon-Contaminated B4C-Coated Optics after Chemically Selective Cleaning with Low-Pressure RF Plasma

Development and Performance Evolution of Medium-Pressure He/SF6/O2-Based Plasma and Wet Chemical Etching Process for Surface Modification of Fused Silica

Metal oxide coating on first mirror in fusion reactor with carbon wall

Sub-Nanometer Accuracy Combination Processing Technology for Nickel–Phosphorus Modified Surfaces Based on Aluminum Reflector Mirror

RF plasma cleaning of optical surfaces: A study of cleaning rates on different carbon allotropes as a function of RF powers and distances

Design and development of medium-pressure plasma process for optical substrate finishing: A comparative study with wet chemical etching

Erosion resistance test of SiC mirror sample for ITER divertor VUV spectrometer

High precision polishing of aluminum alloy mirrors through a combination of magnetorheological finishing and chemical mechanical polishing