Abstract:Cold sintering process (CSP) developed recently has attracted much attention due to the ultralow sintering temperatures and high efficiencies with the assist of transient liquid phase (TLP). Based on CSP, we have further established a protocol for low‐temperature sintering processes by combining TLP with other sintering technologies, including hybrid sintering process with microwave and TLP (MW‐TLP), and hybrid sintering process with spark plasma sintering and TLP (SPS‐TLP). Three typical electro‐ceramics (TiO2, CaWO4, and ZnO) are selected, which are highly densified (>97%) with excellent electrical properties at reduced sintering temperatures, applied pressures or holding times, demonstrating the feasibility of MW‐TLP and SPS‐TLP in fabricating electro‐ceramics. Especially, the Q × f value of TiO2 ceramics (38,020 GHz) prepared by MW‐TLP at 1000°C is 46.2% and 23.4% higher than that of microwave and spark plasma sintered samples, respectively, and comparable to traditional thermal sintered (TTS) samples at 1300–1400°C. The dielectric properties of MW‐TLP CaWO4 ceramics sintered at 900°C for 2 h are comparable to TTS samples sintered at 1000–1300°C for 2–5 h. ZnO ceramics can be highly densified (∼98%) by SPS‐TLP with mild sintering conditions (200–300°C and 3.8–50 MPa) compared to SPS (>500°C) and CSP (>100 MPa). The frameworks of fundamental mechanisms are outlined together with the experimental data. It is expected that this work will provide promising sintering methods to fabricate electro‐ceramics and offer inspirations on sintering combinations to develop low‐temperature sintering processes with high efficiencies.

Highly dense 0.3CaCeNbWO 8 ‐0.7LaMnO 3 composite ceramics fabricated by cold sintering process

Highly Dense 0.3cacenbwo8‐0.7lamno3 Composite Ceramics Fabricated by Cold Sintering Process

Formation and Electromagnetic Properties of 0.1 BTO/0.9NZFO Ceramic Composite with High Density Prepared by Three‐Step Sintering Method

Recent progress of cold sintering process on functional ceramic materials

Cold Sintering of Li6.4La3Zr1.4Ta0.6O12/PEO Composite Solid Electrolytes

Cold Sintered LiMgPO4 Based Composites for Low Temperature Co‐fired Ceramic (LTCC) Applications

Cold Sintering Process of Composites: Bridging the Processing Temperature Gap of Ceramic and Polymer Materials

Cold Sintering Process: A Novel Technique for Low-Temperature Ceramic Processing of Ferroelectrics

Hybrid low‐temperature sintering processes of electro‐ceramics

Cold sintering of a Li-ion cathode: LiFePO4-composite with high volumetric capacity

Sintering behavior and properties of Li2O–MgO–ZnO–B2O3–SiO2 ceramic composites for applications in low temperature co-fired ceramic (LTCC) technologies

Cold Sintering Process for ZrO2‐based Ceramics: Significantly Enhanced Densification Evolution in Yttria‐doped ZrO2

Effects of the Liquid Phase Content on the Microstructure and Properties of the ZrW2O8 Ceramics with Negative Thermal Expansion Fabricated by the Cold Sintering Process

Low-loss and Temperature Stable (1-X)ba3p2o8-xmg2b2o5 Composite Ceramics with Low Sintering Temperature

Cold-Sintered Temperature Stable Na0.5Bi0.5MoO4-Li2MoO4 Microwave Composite Ceramics

Cold-sintered Ni0.2Cu0.2Zn0.6Fe2O4-Li2MoO4 ceramic composites with enhanced magnetodielectric properties

Cold Sintering Process for a BaTiO3/Poly(vinylidene difluoride) Ceramic-Polymer Composite: Evaluation of the Structural and Microwave Dielectric Properties

Sintering behavior and properties of CABS/MgAl2O4 composite for LTCC applications

Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties

Synthesis and characterization of La 0.6Sr 0.4-xCa xCo 0.2Fe 0.8O 3 materials by the gel-casting process

Broad temperature dependence, high conductivity, and structure-property relations of cold sintering of LLZO-based composite electrolytes