[Factor VIII inhibitors].

Z. Ruggeri,R. Bader,R. Coppola,P. Mannuccio Mannucci

La Ricerca in Clinica e in Laboratorio

Abstract:

What problem does this paper attempt to address?

Comparative evaluation of commercial DNA isolation approaches for nanopore-only bacterial genome assembly and plasmid recovery

Worarat Kruasuwan,Pongpun Sawatwong,Piroon Jenjaroenpun,Natnicha Wankaew,Tantip Arigul,Suganya Yongkiettrakul,Kamonwan Lunha,Aunthikarn Sudjai,Duangkamon Siludjai,Beth Skaggs,Thidathip Wongsurawat

DOI: https://doi.org/10.1038/s41598-024-78066-2

IF: 4.6

2024-11-16

Scientific Reports

Abstract:The advent of Oxford Nanopore Technologies has undergone significant improvements in terms of sequencing costs, accuracy, and sequencing read lengths, making it a cost-effective, and readily accessible approach for analyzing microbial genomes. A major challenge for bacterial whole genome sequencing by Nanopore technology is the requirement for a higher quality and quantity of high molecular weight DNA compared to short-read sequencing platforms. In this study, using eight pathogenic bacteria, we evaluated the quality, quantity, and fragmented size distribution of extracted DNA obtained from three different commercial DNA extraction kits, and one automated robotic platform. Our results demonstrated significant variation in DNA yield and purity among the extraction kits. The ZymoBIOMICS DNA Miniprep Kit (ZM) provided a higher purity of DNA compared to other kit-based extractions. All kit-based DNA extractions were successfully performed on all twenty-four samples using a single MinION flow cell, with the Nanobind CBB Big DNA kit (NB) yielding the longest raw reads. The Fire Monkey HMW-DNA Extraction Kit (FM) and the automated Roche MagNaPure 96 platform (RO) outperformed in genome assembly, particularly in gram-negative bacteria. Based on our finding, we recommend a minimum read coverage and raw read N50, obtained from the appropriate DNA extraction kit for each bacterial species, to optimize genome assembly and plasmid recovery. This approach will assist end-users in selecting the most effective kit-based extraction method for bacterial whole-genome assembly using only long-read nanopore sequences.

multidisciplinary sciences
Evaluation of DNA extraction kits for long-read shotgun metagenomics using Oxford Nanopore sequencing for rapid taxonomic and antimicrobial resistance detection

Srinithi Purushothaman,Marco Meola,Tim Roloff,Ashley M. Rooney,Adrian Egli

DOI: https://doi.org/10.1038/s41598-024-80660-3

IF: 4.6

2024-11-28

Scientific Reports

Abstract:During a bacterial infection or colonization, the detection of antimicrobial resistance (AMR) is critical, but slow due to culture-based approaches for clinical and screening samples. Culture-based phenotypic AMR detection and confirmation require up to 72 hours (h) or even weeks for slow-growing bacteria. Direct shotgun metagenomics by long-read sequencing using Oxford Nanopore Technologies (ONT) may reduce the time for bacterial species and AMR gene identification. However, screening swabs for metagenomics is complex due to the range of Gram-negative and -positive bacteria, diverse AMR genes, and host DNA present in the samples. Therefore, DNA extraction is a critical initial step. We aimed to compare the performance of different DNA extraction protocols for ONT applications to reliably identify species and AMR genes using a shotgun long-read metagenomic approach. We included three different sample types: ZymoBIOMICS Microbial Community Standard, an in-house mock community of ESKAPE pathogens including Enterococcus faecium , Staphylococcus aureus , Klebsiella pneumoniae , Acinetobacter baumannii , Pseudomonas aeruginosa , and Escherichia coli ( ESKAPE Mock ) , and anonymized clinical swab samples. We processed all sample types with four different DNA extraction kits utilizing different lysis (enzymatic vs. mechanical) and purification (spin-column vs. magnetic beads) methods. We used kits from Qiagen (QIAamp DNA Mini and QIAamp PowerFecal Pro DNA) and Promega (Maxwell RSC Cultured Cells and Maxwell RSC Buccal Swab DNA). After extraction, samples were subject to the Rapid Barcoding Kit (RBK004) for library preparation followed by sequencing on the GridION with R9.4.1 flow cells. The fast5 files were base called to fastq files using Guppy in High Accuracy (HAC) mode with the inbuilt MinKNOW software. Raw read quality was assessed using NanoPlot and human reads were removed using Minimap2 alignment against the Hg38 genome. Taxonomy identification was performed on the raw reads using Kraken2 and on assembled contigs using Minimap2. The AMR genes were identified using Minimap2 with alignment against the CARD database on both the raw reads and assembled contigs. We identified all bacterial species present in the Zymo Mock Community (8/8) and ESKAPE Mock (6/6) with Qiagen PowerFecal Pro DNA kit (chemical and mechanical lysis) at read and assembly levels. Enzymatic lysis retrieved fewer aligned bases for the Gram-positive species ( Staphylococcus aureus and Enterococcus faecium ) from the ESKAPE Mock on the assembly level compared to the mechanical lysis. We detected the AMR genes from Gram-negative and -positive species in the ESKAPE Mock with the QIAamp PowerFecal Pro DNA kit on reads level with a maximum median time of 1.9 h of sequencing. Long-read metagenomics with ONT may reduce the turnaround time in screening for AMR genes. Currently, the QIAamp PowerFecal Pro DNA kit (chemical and mechanical lysis) for DNA extraction along with the Rapid Barcoding Kit for the ONT sequencing captured the best taxonomy and AMR identification for our specific use case.

multidisciplinary sciences
Single laboratory evaluation of the (Q20+) nanopore sequencing kit for bacterial outbreak investigations

Maria Hoffmann,Jae Hee Jang,Sandra M Tallent,Narjol Gonzalez-Escalona

DOI: https://doi.org/10.1101/2024.07.17.603985

2024-07-20

Abstract:This study aimed to evaluate the potential of Oxford Nanopore Technologies (ONT) GridION with Q20+ chemistry as a rapid and accurate method for identifying and clustering foodborne pathogens. The study focuses on assessing whether ONT Q20+ technology could offer near real-time pathogen identification, including SNP differences, serotypes, and antimicrobial resistance genes, to overcome the drawbacks of existing methodologies. This pilot study evaluated different combinations of two DNA extraction methods (Maxwell RSC Cultured Cell DNA kit, and Monarch high molecular weight extraction kits) and two ONT library preparation protocols (ligation and the rapid barcoding sequencing kit) using five well-characterized strains representing diverse foodborne pathogens. The results showed that any combination of extraction and sequencing kits produced high-quality closed bacterial genomes. However, there were variations in assembly length and genome completeness based on different combinations of methods, indicating the need for further optimization. in silico analyses demonstrated that the Q20+ nanopore sequencing chemistry accurately identified species, genotyped, and detected virulence factors comparable to Illumina sequencing. Phylogenomic clustering methods showed that ONT assemblies clustered with reference genomes, although some indels and SNP differences were observed. There were also differences on SNP accuracy among the different species. The observed SNP differences were likely due to sequencing and analysis processes rather than genetic variations in the sampled bacteria. The study also compared a change in the basecaller model with the previous model (SUP 4Khz 260 bps) and found no significant difference in accuracy (SUP 5Khz 400 bps). In conclusion, the evaluation of ONT Q20+ nanopore sequencing chemistry demonstrated its potential as an alternative for rapid and comprehensive bacterial genome analysis in outbreak investigations. However, further research, verification studies, and optimization efforts are needed to address the observed limitations to adopt and fully realize the impact of nanopore sequencing on public health outcomes and more efficient responses to foodborne disease threats.

Genomics
Comparison Analysis of Different DNA Extraction Methods on Suitability for Long-Read Metagenomic Nanopore Sequencing

Lei Zhang,Ting Chen,Ye Wang,Shengwei Zhang,Qingyu Lv,Decong Kong,Hua Jiang,Yuling Zheng,Yuhao Ren,Wenhua Huang,Peng Liu,Yongqiang Jiang

DOI: https://doi.org/10.3389/fcimb.2022.919903

IF: 6.073

2022-06-29

Frontiers in Cellular and Infection Microbiology

Abstract:Metagenomic next-generation sequencing (mNGS) is a novel useful strategy that is increasingly used for pathogens detection in clinic. Some emerging mNGS technologies with long-read ability are useful to decrease sequencing time and increase diagnosed accuracy, which is of great significance in rapid pathogen diagnosis. Reliable DNA extraction is considered critical for the success of sequencing; hence, there is thus an urgent need of gentle DNA extraction method to get unbiased and more integrate DNA from all kinds of pathogens. In this study, we systematically compared three DNA extraction methods (enzymatic cell lysis based on MetaPolyzyme, mechanical cell lysis based on bead beating, and the control method without pre–cell lysis, respectively) by assessing DNA yield, integrity, and the microbial diversity based on long-read nanopore sequencing of urine samples with microbial infections. Compared with the control method, the enzymatic-based method increased the average length of microbial reads by a median of 2.1-fold [Inter Quartile Range (IQR), 1.7–2.5; maximum, 4.8) in 18 of the 20 samples and the mapped reads proportion of specific species by a median of 11.8-fold (Inter Quartile Range (IQR), 6.9–32.2; maximum, 79.27]. Moreover, it provided fully (20 of 20) consistent diagnosed results to the clinical culture and more representative microbial profiles ( P < 0.05), which all strongly proves the excellent performance of enzymatic-based method in long-read mNGS–based pathogen identification and potential diseases diagnosis of microbiome related.

immunology,microbiology
Rapid, multiplexed, whole genome and plasmid sequencing of foodborne pathogens using long-read nanopore technology

Tonya L. Taylor,Jeremy D. Volkening,Eric DeJesus,Mustafa Simmons,Kiril M. Dimitrov,Glenn E. Tillman,David L. Suarez,Claudio L. Afonso

DOI: https://doi.org/10.1038/s41598-019-52424-x

IF: 4.6

2019-11-08

Scientific Reports

Abstract:Abstract U.S. public health agencies have employed next-generation sequencing (NGS) as a tool to quickly identify foodborne pathogens during outbreaks. Although established short-read NGS technologies are known to provide highly accurate data, long-read sequencing is still needed to resolve highly-repetitive genomic regions and genomic arrangement, and to close the sequences of bacterial chromosomes and plasmids. Here, we report the use of long-read nanopore sequencing to simultaneously sequence the entire chromosome and plasmid of Salmonella enterica subsp. enterica serovar Bareilly and Escherichia coli O157:H7. We developed a rapid and random sequencing approach coupled with de novo genome assembly within a customized data analysis workflow that uses publicly-available tools. In sequencing runs as short as four hours, using the MinION instrument, we obtained full-length genomes with an average identity of 99.87% for Salmonella Bareilly and 99.89% for E. coli in comparison to the respective MiSeq references. These nanopore-only assemblies provided readily available information on serotype, virulence factors, and antimicrobial resistance genes. We also demonstrate the potential of nanopore sequencing assemblies for rapid preliminary phylogenetic inference. Nanopore sequencing provides additional advantages as very low capital investment and footprint, and shorter (10 hours library preparation and sequencing) turnaround time compared to other NGS technologies.

multidisciplinary sciences
Closing the gap: Oxford Nanopore Technologies R10 sequencing allows comparable results to Illumina sequencing for SNP-based outbreak investigation of bacterial pathogens

Bert Bogaerts,An Van den Bossche,Bavo Verhaegen,Laurence Delbrassinne,Wesley Mattheus,Stéphanie Nouws,Maxime Godfroid,Stefan Hoffman,Nancy H C Roosens,Sigrid C J De Keersmaecker,Kevin Vanneste,Nancy H. C. Roosens,Sigrid C. J. De Keersmaecker

DOI: https://doi.org/10.1128/jcm.01576-23

2024-03-06

Journal of Clinical Microbiology

Abstract:ABSTRACT Whole-genome sequencing has become the method of choice for bacterial outbreak investigation, with most clinical and public health laboratories currently routinely using short-read Illumina sequencing. Recently, long-read Oxford Nanopore Technologies (ONT) sequencing has gained prominence and may offer advantages over short-read sequencing, particularly with the recent introduction of the R10 chemistry, which promises much lower error rates than the R9 chemistry. However, limited information is available on its performance for bacterial single-nucleotide polymorphism (SNP)-based outbreak investigation. We present an open-source workflow, Prokaryotic Awesome variant Calling Utility (PACU) ( https://github.com/BioinformaticsPlatformWIV-ISP/PACU ), for constructing SNP phylogenies using Illumina and/or ONT R9/R10 sequencing data. The workflow was evaluated using outbreak data sets of Shiga toxin-producing Escherichia coli and Listeria monocytogenes by comparing ONT R9 and R10 with Illumina data. The performance of each sequencing technology was evaluated not only separately but also by integrating samples sequenced by different technologies/chemistries into the same phylogenomic analysis. Additionally, the minimum sequencing time required to obtain accurate phylogenetic results using nanopore sequencing was evaluated. PACU allowed accurate identification of outbreak clusters for both species using all technologies/chemistries, but ONT R9 results deviated slightly more from the Illumina results. ONT R10 results showed trends very similar to Illumina, and we found that integrating data sets sequenced by either Illumina or ONT R10 for different isolates into the same analysis produced stable and highly accurate phylogenomic results. The resulting phylogenies for these two outbreaks stabilized after ~20 hours of sequencing for ONT R9 and ~8 hours for ONT R10. This study provides a proof of concept for using ONT R10, either in isolation or in combination with Illumina, for rapid and accurate bacterial SNP-based outbreak investigation.

microbiology
Nanopore Whole Transcriptome Analysis and Pathogen Surveillance by a Novel Solid‐Phase Catalysis Approach

Yi Fang,Amogh Changavi,Manyun Yang,Luo Sun,Aihua Zhang,Daniel Sun,Zhiyi Sun,Boce Zhang,Ming‐Qun Xu

DOI: https://doi.org/10.1002/advs.202103373

IF: 15.1

2021-11-27

Advanced Science

Abstract:The requirement of a large input amount (500 ng) for Nanopore direct RNA-seq presents a major challenge for low input transcriptomic analysis and early pathogen surveillance. The high RNA input requirement is attributed to significant sample loss associated with library preparation using solid-phase reversible immobilization (SPRI) beads. A novel solid-phase catalysis strategy for RNA library preparation to circumvent the need for SPRI bead purification to remove enzymes is reported here. This new approach leverages concurrent processing of non-polyadenylated transcripts with immobilized poly(A) polymerase and T4 DNA ligase, followed by directly loading the prepared library onto a flow cell. Whole transcriptome sequencing, using a human pathogen Listeria monocytogenes as a model, demonstrates this new method displays little sample loss, takes much less time, and generates higher sequencing throughput correlated with reduced nanopore fouling compared to the current library preparation for 500 ng input. Consequently, this approach enables Nanopore low-input direct RNA-seq, improving pathogen detection and transcript identification in a microbial community standard with spike-in transcript controls. Besides, as evident in the bioinformatic analysis, the new method provides accurate RNA consensus with high fidelity and identifies higher numbers of expressed genes for both high and low input RNA amounts.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Comparative evaluation of soil DNA extraction kits for long read metagenomic sequencing

Harry T Child,Lucy Wierzbicki,Gabrielle R Joslin,Richard K Tennant

DOI: https://doi.org/10.1099/acmi.0.000868.v3

2024-09-27

Abstract:Metagenomics has been transformative in our understanding of the diversity and function of soil microbial communities. Applying long read sequencing to whole genome shotgun metagenomics has the potential to revolutionise soil microbial ecology through improved taxonomic classification, functional characterisation and metagenome assembly. However, optimisation of robust methods for long read metagenomics of environmental samples remains undeveloped. In this study, Oxford Nanopore sequencing using samples from five commercially available soil DNA extraction kits was compared across four soil types, in order to optimise read length and reproducibility for comparative long read soil metagenomics. Average extracted DNA lengths varied considerably between kits, but longer DNA fragments did not translate consistently into read lengths. Highly variable decreases in the length of resulting reads from some kits were associated with poor classification rate and low reproducibility in microbial communities identified between technical repeats. Replicate samples from other kits showed more consistent conversion of extracted DNA fragment size into read length and resulted in more congruous microbial community representation. Furthermore, extraction kits showed significant differences in the community representation and structure they identified across all soil types. Overall, the QIAGEN DNeasy PowerSoil Pro Kit displayed the best suitability for reproducible long-read WGS metagenomic sequencing, although further optimisation of DNA purification and library preparation may enable translation of higher molecular weight DNA from other kits into longer read lengths. These findings provide a novel insight into the importance of optimising DNA extraction for achieving replicable results from long read metagenomic sequencing of environmental samples.
Evaluation of Rapid Library Preparation Protocols for Whole Genome Sequencing Based Outbreak Investigation

Helena M. B. Seth-Smith,Ferdinando Bonfiglio,Aline Cuénod,Josiane Reist,Adrian Egli,Daniel Wüthrich

DOI: https://doi.org/10.3389/fpubh.2019.00241

IF: 5.2

2019-08-27

Frontiers in Public Health

Abstract:Whole genome sequencing (WGS) has become the new gold standard for bacterial outbreak investigation, due to the high resolution available for typing. While sequencing is currently predominantly performed on Illumina devices, the preceding library preparation can be performed using various protocols. Enzymatic fragmentation library preparation protocols are fast, have minimal hands-on time, and work with small quantities of DNA. The aim of our study was to compare three library preparation protocols for molecular typing: Nextera XT (Illumina); Nextera Flex (Illumina); and QIAseq FX (Qiagen). We selected 12 ATCC strains from human Gram-positive and Gram-negative pathogens with %G+C-content ranging from 27% (Fusobacterium nucleatum) to 73% (Micrococcus luteus), each having a high quality complete genome assembly available, to allow in-depth analysis of the resulting Illumina sequence data quality. Additionally, we selected isolates from previously analyzed cases of vancomycin-resistant Enterococcus faecium (VRE) (n = 7) and a local outbreak of Klebsiella aerogenes (n = 5). The number of protocol steps and time required were compared, in order to test the suitability for routine laboratory work. Data analyses were performed with standard tools commonly used in outbreak situations: Ridom SeqSphere+ for cgMLST; CLC genomics workbench for SNP analysis; and open source programs. Nextera Flex and QIAseq FX were found to be less sensitive than Nextera XT to variable %G+C-content, resulting in an almost uniform distribution of read-depth. Therefore, low coverage regions are reduced to a minimum resulting in a more complete representation of the genome. Thus, with these two protocols, more alleles were detected in the cgMLST analysis, producing a higher resolution of closely related isolates. Furthermore, they result in a more complete representation of accessory genes. In particular, the high data quality and relative simplicity of the workflow of Nextera Flex stood out in this comparison. This thorough comparison within an ISO/IEC 17025 accredited environment will be of interest to those aiming to optimize their clinical microbiological genome sequencing.

public, environmental & occupational health
Evaluation of the accuracy of bacterial genome reconstruction with Oxford Nanopore R10.4.1 long-read-only sequencing

Nicholas D. Sanderson,Katie M.V. Hopkins,Matthew Colpus,Melody Parker,Samuel Lipworth,Derrick Crook,Nicole Stoesser

DOI: https://doi.org/10.1099/mgen.0.001246

IF: 4.868

2024-05-08

Microbial Genomics

Abstract:Whole-genome reconstruction of bacterial pathogens has become an important tool for tracking transmission and antimicrobial resistance gene spread, but highly accurate and complete assemblies have largely only historically been achievable using hybrid long- and short-read sequencing. We previously found the Oxford Nanopore Technologies (ONT) R10.4/kit12 flowcell/chemistry produced improved assemblies over the R9.4.1/kit10 combination, however long-read only assemblies contained more errors compared to Illumina-ONT hybrid assemblies. ONT have since released an R10.4.1/kit14 flowcell/chemistry upgrade and recommended the use of Bovine Serum Albumin (BSA) during library preparation, both of which reportedly increase accuracy and yield. They have also released updated basecallers trained using native bacterial DNA containing methylation sites intended to fix systematic basecalling errors, including common adenosine (A) to guanine (G) and cytosine (C) to thymine (T) substitutions. To evaluate these improvements, we successfully sequenced four bacterial reference strains, namely Escherichia coli , Klebsiella pneumoniae , Pseudomonas aeruginosa and Staphylococcus aureus , and nine genetically diverse E. coli bloodstream infection-associated isolates from different phylogroups and sequence types, both with and without BSA. These sequences were de novo assembled and compared against Illumina-corrected reference genomes. In this small evaluation of 13 isolates we found that nanopore long-read-only R10.4.1/kit 14 assemblies with updated basecallers trained using bacterial methylated DNA produce accurate assemblies with ≥40×depth, sufficient to be cost-effective compared with hybrid ONT/Illumina sequencing in our setting.

microbiology,genetics & heredity
NanoCore: core-genome-based bacterial genomic surveillance and outbreak detection in healthcare facilities from Nanopore and Illumina data

Sebastian A. Fuchs,Lisanna Hülse,Teresa Tamayo,Susanne Kolbe-Busch,Klaus Pfeffer,Alexander T. Dilthey

DOI: https://doi.org/10.1128/msystems.01080-24

2024-10-09

mSystems

Abstract:ABSTRACT Genomic surveillance enables the early detection of pathogen transmission in healthcare facilities and contributes to the reduction of substantial patient harm. Fast turnaround times, flexible multiplexing, and low capital requirements make Nanopore sequencing well suited for genomic surveillance purposes; the analysis of Nanopore data, however, can be challenging. We present NanoCore, a user-friendly method for Nanopore-based genomic surveillance in healthcare facilities, enabling the calculation and visualization of cgMLST-like (core-genome multilocus sequence typing) sample distances directly from unassembled Nanopore reads. NanoCore implements a mapping, variant calling, and multilevel filtering strategy and also supports the analysis of Illumina data. We validated NanoCore on two 24-isolate data sets of methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium (VRE). In the Nanopore-only mode, NanoCore-based pairwise distances between closely related isolates were near-identical to Illumina-based SeqSphere + distances, a gold standard commercial method (average differences of 0.75 and 0.81 alleles for MRSA and VRE; sd = 0.98 and 1.00), and gave an identical clustering into closely related and non-closely related isolates. In the “hybrid” mode, in which only Nanopore data are used for some isolates and only Illumina data for others, increased average pairwise isolate distance differences were observed (average differences of 3.44 and 1.95 for MRSA and VRE, respectively; sd = 2.76 and 1.34), while clustering results remained identical. NanoCore is computationally efficient (<15 hours of wall time for the analysis of a 24-isolate data set on a workstation), available as free software, and supports installation via conda. In conclusion, NanoCore enables the effective use of the Nanopore technology for bacterial pathogen surveillance in healthcare facilities. IMPORTANCE Genomic surveillance involves sequencing the genomes and measuring the relatedness of bacteria from different patients or locations in the same healthcare facility, enabling an improved understanding of pathogen transmission pathways and the detection of “silent” outbreaks that would otherwise go undetected. It has become an indispensable tool for the detection and prevention of healthcare-associated infections and is routinely applied by many healthcare institutions. The earlier an outbreak or transmission chain is detected, the better; in this context, the Oxford Nanopore sequencing technology has important potential advantages over traditionally used short-read sequencing technologies, because it supports “real-time” data generation and the cost-effective “on demand” sequencing of small numbers of bacterial isolates. The analysis of Nanopore sequencing data, however, can be challenging. We present NanoCore, a user-friendly software for genomic surveillance that works directly based on Nanopore sequencing reads in FASTQ format, and demonstrate that its accuracy is equivalent to traditional gold standard short read-based analyses.

microbiology
Enrichment of long DNA fragments from mixed samples for Nanopore sequencing

SE Eckert,JZ-M Chan,Darren Houniet,J Breuer,G Speight,

DOI: https://doi.org/10.1101/048850

2016-04-15

Abstract:Abstract Whole-genome sequencing of pathogenic organisms directly from clinical samples combines detection and genotyping in one step. This can speed up diagnosis, especially for slow-growing organisms like Mycobacterium tuberculosis (Mtb) , which need considerable time to grow in subculture, and can provide vital information for effective personalised treatment. Within the PATHSEEK project, we have developed a bait-capture approach to selectively enrich DNA/RNA from specific bacterial and viral pathogens present in clinical samples. Here, we present a variation of the method that allows enrichment of large fragments of target DNA for sequencing on an Oxford Nanopore MinION TM sequencer. We enriched and sequenced cDNA from Influenza A (FluA), genomic DNA (gDNA) from human cytomegalovirus (CMV) and from two strains of Mtb , and present an evaluation of the method together with analysis of the sequencing results from a MinION TM and an Illumina MiSeq sequencer. While unenriched FluA and CMV samples had no reads matching the target organism due to the high background of DNA from host cell lines, enriched samples had 56.7% and 90.9% on-target reads respectively for the best quality Nanopore reads.
Extraction of high‐molecular‐weight DNA from Streptococcus spp. for nanopore sequencing in resource‐limited settings

Suvra Das,JérÔme Delamare‐Deboutteville,Andrew C. Barnes,Oleksandra Rudenko

DOI: https://doi.org/10.1002/mbo3.1432

2024-08-24

MicrobiologyOpen

Abstract:A method for extracting high‐molecular‐weight DNA from Streptococcus spp., suitable for resource‐limited settings, was optimized. The extracted DNA was used for nanopore whole‐genome sequencing. This sequencing technique is valuable for the rapid diagnosis of diseases in warm water aquaculture, such as streptococcosis, under field conditions in low‐ and middle‐income countries. It provides near real‐time information on species, serotype, and the presence of plasmids. This was demonstrated by the discovery of a 15 kb low copy number mobilizable plasmid in Streptococcus iniae, the first reported in this species, which we named pSI1. The long‐read sequencing platform MinION, developed by Oxford Nanopore Technologies, enables the sequencing of bacterial genomes in resource‐limited settings, such as field conditions or low‐ and middle‐income countries. For this purpose, protocols for extracting high‐molecular‐weight DNA using nonhazardous, inexpensive reagents and equipment are needed, and some methods have been developed for gram‐negative bacteria. However, we found that without modification, these protocols are unsuitable for gram‐positive Streptococcus spp., a major threat to fish farming and food security in low‐ and middle‐income countries. Multiple approaches were evaluated, and the most effective was an extraction method using lysozyme, sodium dodecyl sulfate, and proteinase K for lysis of bacterial cells and magnetic beads for DNA recovery. We optimized the method to consistently achieve sufficient yields of pure high‐molecular‐weight DNA with minimal reagents and time and developed a version of the protocol which can be performed without a centrifuge or electrical power. The suitability of the method was verified by MinION sequencing and assembly of 12 genomes of epidemiologically diverse fish‐pathogenic Streptococcus iniae and Streptococcus agalactiae isolates. The combination of effective high‐molecular‐weight DNA extraction and MinION sequencing enabled the discovery of a naturally occurring 15 kb low‐copy number mobilizable plasmid in S. iniae, which we name pSI1. We expect that our resource‐limited settings‐adapted protocol for high‐molecular‐weight DNA extraction could be implemented successfully for similarly recalcitrant‐to‐lysis gram‐positive bacteria, and it represents a method of choice for MinION‐based disease diagnostics in low‐ and middle‐income countries.

microbiology
Evaluation of Oxford Nanopore’s MinION Sequencing Device for Microbial Whole Genome Sequencing Applications

Andrea D. Tyler,Laura Mataseje,Chantel J. Urfano,Lisa Schmidt,Kym S. Antonation,Michael R. Mulvey,Cindi R. Corbett

DOI: https://doi.org/10.1038/s41598-018-29334-5

IF: 4.6

2018-07-19

Scientific Reports

Abstract:The MinION sequencer (Oxford Nanopore Technologies) is a paradigm shifting device allowing rapid, real time long read sequencing of nucleic acids. Yet external benchmarking of this technologies’ capabilities has not been extensively reported, nor has thorough evaluation of its utility for field-based analysis with sub-optimal sample types been described. The aim of this study was to evaluate the capability of the MinION sequencer for bacterial genomic and metagenomic applications, with specific emphasis placed on the quality, yield, and accuracy of generated sequence data. Two independent laboratories at the National Microbiology Laboratory (Public Health Agency of Canada), sequenced a set of microbes in replicate, using the currently available flowcells, sequencing chemistries, and software available at the time of the experiment. Overall sequencing yield and quality improved through the course of this set of experiments. Sequencing alignment accuracy was high reaching 97% for all 2D experiments, though was slightly lower for 1D sequencing (94%). 1D sequencing provided much longer sequences than 2D. Both sequencing chemistries performed equally well in constructing genomic assemblies. There was evidence of barcode cross-over using both the native and PCR barcoding methods. Despite the sub-optimal nature of samples sequenced in the field, sequences attributable to B. anthracis the target organism used in this scenario, could none-the-less be detected. Together, this report showcases the rapid advancement in this technology and its utility in the context of genomic sequencing of microbial isolates of importance to public health.

multidisciplinary sciences
FindingNemo: A Toolkit for DNA Extraction, Library Preparation and Purification for Ultra Long Nanopore Sequencing

Inswasti Cahyani,John Tyson,Nadine Holmes,Josh Quick,Chris Moore,Nicholas James Loman,Matthew W Loose

DOI: https://doi.org/10.1101/2024.08.16.608306

2024-08-19

Abstract:Since the advent of long read sequencing, achieving longer read lengths has been a key goal for many users. Ultra-long read sets (N50 > 100 kb) produced from Oxford Nanopore sequencers have improved genome assemblies in recent years. However, despite progress in extraction protocols and library preparation methods, ultra-long sequencing remains challenging for many sample types. Here we compare various methods and introduce the FindingNemo protocol that: (1) optimises ultra-high molecular weight (UHMW) DNA extraction and library clean-up by using glass beads and Hexamminecobalt(III) chloride (CoHex), (2) can deliver high ultra-long sequencing yield of >20 Gb of reads from a single MinION flow cell or >100 Gb from PromethION devices (R9.4 to R10.4 pore variants), and (3) is scalable to using fewer input cells or lower DNA amounts, with extraction to sequencing possible in a single working day. By comparison, we show this protocol is superior to previous ones due to precise determination of input DNA quantity and quality by cell count, sample dilution and homogenization approaches

Genomics
Comparative evaluation of a new magnetic bead-based DNA extraction method from fecal samples for downstream next-generation 16S rRNA gene sequencing

Kara D. McGaughey,Tulay Yilmaz-Swenson,Nourhan M. Elsayed,Dianne A. Cruz,Ramona R. Rodriguez,Michael D. Kritzer,Angel V. Peterchev,Megan Gray,Samantha R. Lewis,Jeffrey Roach,William C. Wetsel,Douglas E. Williamson

DOI: https://doi.org/10.1371/journal.pone.0202858

IF: 3.7

2018-08-23

PLoS ONE

Abstract:We are colonized by a vast population of genetically diverse microbes, the majority of which are unculturable bacteria that reside within the gastrointestinal tract. As affordable, advanced next-generation sequencing technologies become more widely available, important discoveries about the composition and function of these microbes become increasingly possible. In addition to rapid advancement in sequencing technologies, automated systems have been developed for nucleic acid extraction; however, these methods have yet to be widely used for the isolation of bacterial DNA from fecal samples. Here, we adapted Promega's Maxwell® RSC PureFood GMO and Authentication kit for use with fecal samples and compared it to the commonly used Qiagen QIAamp® PowerFecal® kit. Results showed that the two approaches yielded similar measures of DNA purity and successful next-generation sequencing amplification and produced comparable composition of microbial communities. However, DNA extraction with the Maxwell® RSC kit produced higher concentrations with a lower fecal sample input weight and took a fraction of the time compared to the QIAamp® PowerFecal® protocol. The results of this study demonstrate that the Promega Maxwell® RSC system can be used for medium-throughput DNA extraction in a time-efficient manner without compromising the quality of the downstream sequencing.

multidisciplinary sciences
[Congenital pulmonary cysts in infants; cure following surgical puncture].

P. Giraud,H. Metras,R. Gallerand

Abstract:
Rapid identification, capsular typing and molecular characterization of Streptococcus pneumoniae by using whole genome nanopore sequencing

S. Garcia-Garcia,A. Perez-Arguello,D. Henares,N. Timoneda,C. Muñoz-Almagro

DOI: https://doi.org/10.1186/s12866-020-02032-x

IF: 4.465

2020-11-13

BMC Microbiology

Abstract:Abstract Background Whole genome sequencing has emerged as a useful tool for identification and molecular characterization of pathogens. MinION (Oxford Nanopore) is a real-time third generation sequencer whose portability, affordability and speed in data production make of it an attractive device for whole genome sequencing. The objective of this study is to evaluate MinION sequencer for pathogen identification and molecular characterization of Streptococcus pneumoniae isolated at a children’s Hospital. Whole genome sequencing of 32 Streptococcus pneumoniae invasive isolates, previously characterized by standard methods (Quellung reaction, Multiplex PCR and Sanger-MLST), were performed. DNA was extracted using ZymoBIOMICS DNA Microprep kit. Quantification and purity of DNA was assessed by Qubit and Nanodrop, respectively. Library preparation was performed using the Rapid Barcoding Kit. Real-time workflow EPI2ME platform “What’s it in my pot” was used for species identification. Fast5 sequences were converted into FASTQ by Albacore software. Reads were assembled using CANU software. PathogenWatch, genomic epidemiology and pubmlst online tools were used for capsular typing and/or whole genome-MLST profile. Results Rapid identification of Streptococcus pneumoniae was achieved by “What’s in my pot”. Capsular typing was correctly assigned with PathogenWatch in all 32 isolates at serogroup level and 24 at serotype level. Whole genome-MLST results obtained by genomic epidemiology and pubmlst were consistent with double locus variant clonal complex obtained by Sanger-MLST in 31 isolates. Conclusion MinION sequencer provides a rapid, cost-effective and promising pathway for performing WGS by a pocked-sized device for epidemiological purposes but improving its sequencing accuracy will make it more appealing to be used in clinical microbiology laboratories.

microbiology
A novel barcoded nanopore sequencing workflow of high-quality, full-length bacterial 16S amplicons for taxonomic annotation of bacterial isolates and complex microbial communities

Julian Dommann,Jakob Kerbl-Knapp,Diana Albertos Torres,Adrian Egli,Jennifer Keiser,Pierre H. H. Schneeberger

DOI: https://doi.org/10.1128/msystems.00859-24

2024-09-11

mSystems

Abstract:ABSTRACT Due to recent improvements, Nanopore sequencing has become a promising method for experiments relying on amplicon sequencing. We describe a flexible workflow to generate and annotate high-quality, full-length 16S rDNA amplicons. We evaluated it for two applications, namely, (i) identification of bacterial isolates and (ii) species-level profiling of microbial communities. We assessed the identification of single bacterial isolates by sequencing, using a set of barcoded full-length 16S rRNA gene primer pairs (pair A), on 47 isolates encompassing multiple genera and compared those results with matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS)-based identification. Species-level community profiling was tested with two sets of barcoded full-length 16S primer pairs (A and B) and compared to the results obtained with shotgun Illumina sequencing using 27 stool samples. We developed a Nextflow pipeline to retain high-quality reads and taxonomically annotate them. We found high agreement between our workflow and MALDI-TOF data for isolate identification (positive predictive value = 0.90, Cramér’s V = 0.857, and Theil’s U = 0.316). For species-level community profiling, we found strong correlations ( r s > 0.6) of alpha diversity indices between the two primer sets and Illumina sequencing. At the community level, we found significant but small differences when comparing sequencing techniques. Finally, we found a moderate to strong correlation when comparing the relative abundances of individual species (average r s = 0.6 and 0.533 for primers A and B). Despite identified shortcomings, the proposed workflow enabled accurate identification of single bacterial isolates and prominent features in microbial communities, making it a worthwhile alternative to MALDI-TOF MS and Illumina sequencing. IMPORTANCE A quick, robust, simple, and cost-effective method to identify bacterial isolates and communities in each sample is indispensable in the fields of microbiology and infection biology. Recent technological advances in Oxford Nanopore Technologies sequencing make this technique an attractive option considering the adaptability, portability, and cost-effectiveness of the platform, even with small sequencing batches. Here, we validated a flexible workflow to identify bacterial isolates and characterize bacterial communities using the Oxford Nanopore Technologies sequencing platform combined with the most recent v14 chemistry kits. For bacterial isolates, we compared our nanopore-based approach to matrix-assisted laser desorption ionization-time of flight mass spectrometry-based identification. For species-level profiling of complex bacterial communities, we compared our nanopore-based approach to Illumina shotgun sequencing. For reproducibility purposes, we wrapped the code used to process the sequencing data into a ready-to-use and self-contained Nextflow pipeline.

microbiology
Quality assurance in mental health-care: a case study from social work.

C. Ring

DOI: https://doi.org/10.1046/J.0966-0410.2001.00324.X

2001-11-01

Abstract:The quality of health and social care is now a high priority for government, professionals, and the public. This is particularly true of mental health, where explicit standards lie at the centre of current policy, demanding the development of reliable means for quality assurance. These need to allow for the multiplicity of stakeholders in mental health-care, and their different constructions of "quality". The challenges presented are illustrated by this account of an action research programme, which was developed to improve social work practice in a multidisciplinary mental health service, and evaluated using a case study design. An action research approach was chosen in preference to an "off-the-shelf" quality assurance system, because it possessed features that appeared to match the context of the work. It involved feeding back the findings of a baseline assessment of service quality to four teams of social workers, who used the information to select priority areas for improvement. An action plan was developed with them, and its implementation and impact were examined. Substantial improvements were observed in only one of the chosen target areas--the quality of case recording. For the other--securing the clients' full involvement in their care plan--very limited improvements occurred. Interview data suggested that this was due to the presence of extensive organisational support for the first objective, but not the second. These findings suggest that while some features of action research can contribute to quality improvement, these must be incorporated into a more comprehensive programme of change, which commands the support of all the stakeholders involved.

[Factor VIII inhibitors].

Comparative evaluation of commercial DNA isolation approaches for nanopore-only bacterial genome assembly and plasmid recovery

Evaluation of DNA extraction kits for long-read shotgun metagenomics using Oxford Nanopore sequencing for rapid taxonomic and antimicrobial resistance detection

Single laboratory evaluation of the (Q20+) nanopore sequencing kit for bacterial outbreak investigations

Comparison Analysis of Different DNA Extraction Methods on Suitability for Long-Read Metagenomic Nanopore Sequencing

Rapid, multiplexed, whole genome and plasmid sequencing of foodborne pathogens using long-read nanopore technology

Closing the gap: Oxford Nanopore Technologies R10 sequencing allows comparable results to Illumina sequencing for SNP-based outbreak investigation of bacterial pathogens

Nanopore Whole Transcriptome Analysis and Pathogen Surveillance by a Novel Solid‐Phase Catalysis Approach

Comparative evaluation of soil DNA extraction kits for long read metagenomic sequencing

Evaluation of Rapid Library Preparation Protocols for Whole Genome Sequencing Based Outbreak Investigation

Evaluation of the accuracy of bacterial genome reconstruction with Oxford Nanopore R10.4.1 long-read-only sequencing

NanoCore: core-genome-based bacterial genomic surveillance and outbreak detection in healthcare facilities from Nanopore and Illumina data

Enrichment of long DNA fragments from mixed samples for Nanopore sequencing

Extraction of high‐molecular‐weight DNA from Streptococcus spp. for nanopore sequencing in resource‐limited settings

Evaluation of Oxford Nanopore’s MinION Sequencing Device for Microbial Whole Genome Sequencing Applications

FindingNemo: A Toolkit for DNA Extraction, Library Preparation and Purification for Ultra Long Nanopore Sequencing

Comparative evaluation of a new magnetic bead-based DNA extraction method from fecal samples for downstream next-generation 16S rRNA gene sequencing

[Congenital pulmonary cysts in infants; cure following surgical puncture].

Rapid identification, capsular typing and molecular characterization of Streptococcus pneumoniae by using whole genome nanopore sequencing

A novel barcoded nanopore sequencing workflow of high-quality, full-length bacterial 16S amplicons for taxonomic annotation of bacterial isolates and complex microbial communities

Quality assurance in mental health-care: a case study from social work.