Abstract:Compared with the four-phase optical structure, the grating encoder based on two-phase optical structure reduces the number of optical devices used in the system and makes the system more compact. Due to the high requirements for realtime and parallel processing of algorithm solution, the powerful parallel computing ability of Field Programmable Gate Array (FPGA) and customized hardware acceleration algorithm are needed to improve the real-time performance. In the previous research, the displacement signal generated by the grating encoder can be input into the FPGA through analog to digital converter (ADC) sampling, and then complete self-designed filter filtering, phase correction and displacement solution. In this paper, further, the ADC sampling rate adjustable interface is added to the FPGA, the global signal and the dc offset remove algorithm is added, and the displacement solution results in the form of fixed-point number are output to the host computer through the MicroBlaze (MB) soft core. MB core can realize process control and interface conversion on FPGA, and use a small amount of logic resources to replace the functions of MCU and DSP of traditional embedded measurement system, so as to further improve the integration of the instrument. A series of experiments are carried out on the two-phase FPGA platform. ADC sampling rate is 200ksps, 8-Channel synchronous parallel sampling, FPGA system clock frequency is 200MHz. The linear displacement table is set to drive the measurement grating at different displacement speeds, and the total stroke is set to 10mm. The FPGA real-time displacement solution platform is tested. The experimental results show that FPGA obtains accurate displacement solution results under different speed tests. In the test of 2 mm/s, the maximum cumulative displacement measurement error is 5um, which shows the real-time performance and accurate displacement solution performance of FPGA platform.

MicroFPGA: An affordable FPGA platform for microscope control

Design of an FPGA-Based Controller for Fast Scanning Probe Microscopy

Design Of High-Resolution Digital Microscope Eyepiece Based On Fpga

AEcroscoPy: A software-hardware framework empowering microscopy toward automated and autonomous experimentation

A many-channel FPGA control system

Experimental timing and control using microcontrollers

Modern Microscopy with the Web of Things: The OpenFlexure Microscope Software Stack

FPGA Remote Laboratory Using IoT Approaches

A versatile LabVIEW and FPGA-based scanned probe microscope for in-operando electronic device characterization

Using advanced FPGA SoC technologies for the design of industrial control applications

FPGAs used in industrial control and instrumentation systems

Flexible Electronic Control System Based on FPGA for Liquid-Crystal Microlens

FPGA-Based Optimization of Industrial Numerical Machine Tool Servo Drives

Soft Control of Scanning Probe Microscope with High Flexibility.

OpenStage: a low-cost motorized microscope stage with sub-micron positioning accuracy

Guest Editorial Special Section on Industrial Control Applications of FPGAs

FPGA displacement calculation platform and test of two-phase grating interference encoder

A Fast Blink-Control System Based on FPGA

FPGAs in Industrial Control Applications

A Custom Parallel Hardware Architecture of Nonlinear Model-Predictive Control on FPGA

An SoC-based Platform for Integrated Multi-Axis Motion Control and Motor Drive