Abstract:The solid waste (e.g coal gangue, coal fly ash, desulfurization gypsum, gasification fine slag, furnace bottom slag) is made into underground backfilling material, which not only controls surface subsidence, but also is an effective way to consume a large amount of solid waste. In this paper, the strength at different curing ages is taken as the response target, the proportioning experiment of desulfurization gypsum, gasification fine slag and furnace bottom slag is designed by response surface methodology. The experimental results were analyzed by analysis of variance (ANOVA), the strength regression models at different curing ages were established, the interaction and influence effects of three kinds of solid wastes on age strength are analyzed. It is concluded that the influence of desulfurization gypsum and gasification fine slag on the age strength of backfill specimens is negative, the influence of furnace bottom slag on early strength is negative, but the influence on 28-day strength shows positive effect. Through regression model prediction and experimental verification, it is concluded that the optimal ratio of solid waste for underground backfilling is coal gangue: coal fly ash: desulfurization gypsum: gasification fine slag: furnace bottom slag = 1:0.4:0.2:0.1:0.1. Then, the compression deformation and failure morphology evolution of the backfill specimens with the optimal ratio are analyzed, it can be known that the stress rebound characteristics can make the backfill unload slowly and avoid sudden bursting; The failure morphology of the backfill changes obviously in the compression process, and preventive and remedial measures can be taken in time according to the failure morphology. Finally, Mercury Intrusion Porosimetry (MIP) test was carried out on the pore structure of the backfill specimen with the optimal ratio, which showed that the pores in the backfill were mostly closed pores, with a pore size range of 5-3×10 5 nm, mainly medium and large pores, and the compactness was not high; The results of X-Ray Diffraction (XRD) and Scanning Electron Microscope-Energy Dispersive Spectromete (SEM-EDS) showed that there are few active components in the solid waste, and there is no hydration reaction between the solid wastes. The main minerals in the backfill specimens are gypsum, quartz, kaolinite, mullite and calcite. The content of hydration products of cement and solid waste are mainly thin rod-like ettringite and cotton-like and fibrous gel. Its content is less, so the strength of specimen is lower.

Microstructure Analysis and Mechanical Properties of Backfill Material Using Stone Sludge

Application of Controlled Low Strength Material in Backfilling of Pipe Trench

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering-Part 2: A Pilot-Scale Study

Experimental Study and Application of Controlled Low-Strength Materials in Trench Backfilling in Suqian City, China

Performance evaluation of modified marine dredged soil and recycled in-situ soil as controlled low strength materials for underground pipe

Physical Modeling Study on Treatment of Waste Slurry with Vacuum Preloading at Bottom Combined with Upper Surcharge Loading

Research on Slurry Flowability and Mechanical Properties of Cemented Paste Backfill: Effects of Cement-to-Tailings Mass Ratio and Mass Concentration

Study on Performance Tests and the Application of Construction Waste as Subgrade Backfill

Production of a new type of cemented paste backfill with solid waste from carbide slag, soda residue, and red mud: mechanism, optimization, and its environmental effects

Upcycling of wastes for sustainable controlled low-strength material: A review on strength and excavatability

The Effects of Hydroxypropyl Methyl Cellulose and Metakaolin on the Properties of Self-Compacting Solidified Soil Based on Abandoned Slurry

Engineering properties of controlled low strength material (CLSM) incorporating red mud

Study on Effects of Refining Slag on Properties and Hydration of Cemented Solid Waste-Based Backfill

Experimental Study on Macro and Meso Characteristics of Steel-Slag-Based Cemented Backfill due to Microbial Mineralization Action

Mix Design and Field Detection of Large-Particle-Size Graded Crushed Stone Mixtures for Pavement Reconstruction

Preparing controlled low strength materials (CLSM) using excavated waste soils with polycarboxylate superplasticizer

Study on proportioning experiment and performance of solid waste for underground backfilling

Experimental study on the mechanical properties and consolidation mechanism of microbial grouted backfill

Setting, bleeding, and hardening strength properties of coarse aggregate backfill slurry

Optimization of Proportions of Alkali-Activated Slag–Fly Ash-Based Cemented Tailings Backfill and Its Strength Characteristics and Microstructure under Combined Action of Dry–Wet and Freeze–Thaw Cycles

Experimental Study on the Performance of Improved Collapsible Loess Mixture with Concrete Crushed Gravel