Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC-ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Lithium Difluorophosphate: A Boon for High Voltage Li Ion Batteries and a Bane for High Thermal Stability/Low Toxicity: Towards Synergistic Dual Additives to Circumvent this Dilemma

Formation and Suppression of Toxic Organofluorophosphates in Lithium Ion Batteries: Making the High-Voltage Additive Lithium Difluorophosphate Viable for Commercial Applications

Lithium Difluorophosphate As a Promising Electrolyte Lithium Additive for High-Voltage Lithium-Ion Batteries

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Elucidating the Limit of Lithium Difluorophosphate Electrolyte Additive for High‐Voltage Li/Mn‐Rich Layered Oxide || Graphite Li Ion Batteries

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Lithium Difluorophosphate as a Widely Applicable Additive to Boost Lithium‐Ion Batteries: a Perspective

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Additives Synergy for Stable Interface Formation on Rechargeable Lithium Metal Anodes

Lithium Difluorophosphate as a Dendrite-Suppressing Additive for Lithium Metal Batteries

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Synchronous dual additives to boost multiphase interface stability of high-voltage Li-rich Mn-based batteries

Functionality Selection Principle for High Voltage Lithium-ion Battery Electrolyte Additives

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

The High-Fluorinated Bi-Molecular Combination Enables High-Energy Lithium Batteries under Challenging Environment

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

Fluorine-Rich Electrolyte Additive for Achieving Dendrite-Free Lithium Anodes at Low Temperatures

Hydrofluoric Acid‐Removable Additive Optimizing Electrode Electrolyte Interphases with Li+ Conductive Moieties for 4.5 V Lithium Metal Batteries

A Fluorine Rich Borate Ionic Additive Enabling High-Voltage Li Metal Batteries

Stabilization of High-Voltage Lithium Metal Batteries Using a Sulfone-Based Electrolyte with Bi-Electrode Affinity and LiSO2F-rich Interphases

Lithium Difluorophosphate As a Widely Applicable Additive to Boost Lithium‐Ion Batteries: a Perspective (adv. Funct. Mater. 8/2023)