Abstract:Polymer monolithic stationary phases were prepared based on a cyclic anhydride as a reactive and tunable platform via ring-opening post-polymerization using primary amines; octadecylamine and benzylamine. The characterization techniques indicated the insertion of the functional groups into the original monoliths and confirmed the amidation reactions. The post-polymerization modification also improved the monolith's thermal and mechanical stability and induced significant improvement in their surface area. The stationary phases were synthesized inside small dimensions stainless-steel columns (2.1 mm i.d. × 50 mm length). The prepared columns before and after modifications have been tested for the separation of the alkylbenzene series and some polycyclic aromatic hydrocarbons (PAHs) as model compounds. In all cases, the chromatographic performance in terms of the height equivalent to a theoretical plate on the functionalized monoliths was remarkably improved when compared with that on the unmodified monolith, which located between 9.59–39.49 μm and 4.08–31.50 μm using monoliths modified with octadecylamine and benzylamine, respectively. Under the same chromatographic conditions, the functionalization of monoliths with octadecylamine provided more hydrophobic interactions and enhanced the retention of alkylbenzenes, while the modification of monoliths with benzyl groups improved the separation and the retention of the PAHs through the strong π-π interactions. However, the post-modification polymerization with octadecylamine and benzylamine enhanced the separation efficiency of the prepared columns toward all studied compounds. The repeatability of the injections on the same column and the reproducibility of the prepared columns have been studied for some selected parameters and estimated in terms of percent relative standard deviation (%RSD) for some of the studied compounds. The repeatability of the prepared columns was ≤9.42% (n=5) based on run-to-run injections and ≤9.48% based on day-to-day injections for five successive days. The reproducibility levels, on the other side, were ≤20.95% for all studied parameters in all cases. To assess their performance for the analysis of real samples, the applicability of the prepared columns was examined for the separation of the active ingredients extracted from some commercial pharmaceutical formulations and for the separation of tea water extract constituents. The validation data show the suitability of the columns for practical use in the routine analysis of these samples.

Chromatographic Separation of Aromatic Amine Isomers: A Solved Issue by a New Amphiphilic Pillar[6]arene Stationary Phase

High Selectivity of A Novel Pillar[5]arene with Ester Units as A Gas Chromatographic Stationary Phase Toward Aromatic Isomers

Amphiphilic calix[4]arenes as a highly selective gas chromatographic stationary phase for aromatic amine isomers

Efficient gas chromatographic separation of xylene and other aromatic isomers by using pillar[6]arene-based stationary phase

Performance and selectivity of amphiphilic pillar[5]arene as stationary phase for capillary gas chromatography

High-resolution performance of pillar[6]arene functionalized with imidazolium ionic liquids for gas chromatography

Ester-functionalized pillar[6]arene as the gas chromatographic stationary phase with high-resolution performance towards the challenging isomers of xylenes, diethylbenzenes, and ethyltoluenes

Propanediamine modified pillar[5]arene: A novel stationary phase for the high selectivity separation of versatile analytes

Hydroxyl-functionalized pillar[5]arene with high separation performance for gas chromatography

Two different rims functionalized pillar[5]arene stationary phase for capillary gas chromatography

Performance of permethyl pillar[5]arene stationary phase for high-resolution gas chromatography

Enantioseparation Of Aromatic Alcohol And Aromatic Ester On Chiral Stationary Phases

Enantioseparation Of D,L-Alpha-Amine Acid On Crown Ester Chiral Stationary Phases

Triptycene-based stationary phases for gas chromatographic separations of positional isomers

Chiral phenethylamine synergistic tricarboxylic acid modified ,B-cyclodextrin immobilized on porous silica for enantioseparation

One‐pot synthesis of pillar[5]quinone‐amine polymer coated silica as stationary phase for high‐performance liquid chromatography

The Polystyrene-Divinylbenzene Stationary Phase Modified with Poly (Amine-Epichlorohydrin) for Ion Chromatography

Separation performance of p-nitro-octadecyloxy-calix[8]arene as stationary phases for capillary gas chromatography

Enantioseparation of Three Non-Steroidal Anti-Inflammatory Agents on Chiral Stationary Phase by HPLC

Synthesis and evaluation of aromatic stationary phases based on linear solvation energy relationship model for expanded application in supercritical fluid chromatography

Monolith stationary phases prepared via cyclic anhydride ring-opening polymerization as tunable platforms for chromatographic applications