Abstract:Recently, the large-scale deployment of electric vehicles (EVs) and stationary battery systems has put forward urgent requests for rechargeable batteries with higher energy/power density and longer lifespans. As such, next-generation Li-ion batteries (LiBs) are expected to meet these requirements. The possibility of using Ni-rich high-capacity cathode materials (NMC) can help to achieve that goal, however, they still suffer from significant capacity fade via several chemical and mechanical degradation modes. One is crack formation within secondary particles which leads to parasitic reactions that evolve oxygen and potentially initiate the formation of inactive crystal structures. LiBs mechanical and chemical degradation mechanisms can be extended by applying protective coatings to the cathode’s surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing flexible hybrid coatings that can accommodate potential volume changes of the electrode during the battery cycling. This study reports the deposition of novel organic-inorganic films via the ALD-MLD method. Characterization analysis such as FTIR, XPS, SEM-EDS, and TEM confirmed the film deposition on the surface of the NMC electrode. Besides, the electrochemical results showed the enhancement of the coated electrode, as evidenced by providing a longer life with a 93% capacity retention after 150 cycles (3.0-4.4 V vs. Li/Li+), while the uncoated one retained only 83% of its initial capacity. Moreover, in situ dilatometry showed irreversible volume change for uncoated NMC while it was mostly reversible for coated ones during the cycling. It revealed the dilation behavior of the electrode, resulting in crack formation, which is significantly suppressed for the coated samples. Stable cycling of Ni-rich cathode materials in crucial conditions such as high voltage windows and elevated temperatures is still extremely challenging. To evaluate this, in situ dilatometry was performed at elevated temperatures (40 °C and 55 °C) and higher voltage ranges (3.0-4.6 V). The results confirmed that in both conditions, the dilation behavior of the coated sample is still under control while the capacity is comparable to the uncoated sample. This revealed that the coatings present good lithium-ion kinetics and reduce electrolyte decomposition. Overall, this work showed the liability of the ALD-MLD films deposited on NMC electrodes to mitigate the degradation mechanisms and provides insight into a method that seems promising as a protective and elastic coating for future high-energy lithium-ion battery cathodes. Figure 1

Structural Insight into Protective Alumina Coatings for Layered Li-Ion Cathode Materials by Solid-State NMR Spectroscopy

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Identification of the dual roles of Al2O3 coatings on NMC811-cathodes via theory and experiment

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Enhanced electrochemical properties of Al2O3-coated LiNiPO4 cathode materials for lithium-ion batteries

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD

Interphase design of LiNi 0.6 Mn 0.2 Co 0.2 O 2 as positive active material for lithium ion batteries via Al 2 O 3 coatings using magnetron sputtering for improved performance and stability

Multi‐Element Surface Coating of Layered Ni‐Rich Oxide Cathode Materials and Their Long‐Term Cycling Performance in Lithium‐Ion Batteries

New insights into dry-coating-processed surface engineering enabling structurally and thermally stable high-performance Ni-rich cathode materials for lithium ion batteries

Simple Solid-State Method for Synthesis of Li[Li 0.20 Mn 0.534 Ni 0.133 Co 0.133 ]O 2 Cathode Material with Improved Electrochemical Performance in Lithium-Ion Batteries

Surface and grain boundary coating for stabilizing LiNi0.8Mn0.1Co0.1O2 based electrodes

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Stabilized Positive Electrode Material to Enable High Energy/Power Density Lithium-Ion Batteries

Highly Stable Li1.2mn0.54co0.13ni0.13o2 Enabled By Novel Atomic Layer Deposited Aipo(4) Coating

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Stable Interstitial Layer to Alleviate Fatigue Fracture of High Nickel Cathode for Lithium-Ion Batteries

Outstanding enhancements in stability of LiNi0.8Mn0.1Co0.1O2 cathode by AlPO4/ACB double coating: Insights into surface structure and chemistry

Atomic Insight into the Layered/Spinel Phase Transformation in Charged LiNi0.80Co0.15Al0.05O2 Cathode Particles