Abstract:Developments in electric vehicles and mobile electronic devices are promoting the demand for lithium-ion batteries with higher capacity and longer lifetime. The performances of lithium-ion batteries are crucially affected by cathode materials, among which ternary cathode materials are the most competitive option with the advantages of high capacity, safety, and cost-effectiveness. However, although high-nickel ternary cathode materials can achieve relatively high specific capacity, they generally have unsatisfactory stability during long-term cycling. In this study, the microscopic mechanisms of the cathode failure and the principle of coating modification in lithium-ion batteries have been comprehensively examined. It has been revealed that the irreversible capacity fading is mainly attributed to the interface chemical reaction, which reduces the transition-metal valence states and generates undesired disordered rock-salt phases. This structural phase transformation at the interface induces the dissolution of transition metals and results in irreversible capacity loss of the cathode. To restrain the occurrence of this process, a LiNbO3 coating-modified single-crystal LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material has been prepared. The electrochemical properties as well as the microstructural evolution of the cathode-electrolyte interface during cycling of both the uncoated and coated samples have been comprehensively characterized and compared through impedance spectroscopy testing, SEM-EDX, STEM, and EELS characterization. Additionally, molecular dynamics simulation results confirmed that LiNbO3 coating can effectively inhibit the dissolution of transition metals while providing stable lithium-ion channels. The experimental results also indicate that the coating modification can effectively improve the cycling stability of the NCM811, with the capacity retention rate for 500 cycles increasing from 19% to 70%. This study is helpful to deepen the understanding of the capacity fading mechanisms, and the coating method is effective at maintaining the structural stability and improving the cycle life of lithium-ion batteries.

Stable Interstitial Layer to Alleviate Fatigue Fracture of High Nickel Cathode for Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Bulk Fatigue Induced by Surface Reconstruction in Layered Ni-rich Cathodes for Li-ion Batteries

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Building a Self‐Adaptive Protective Layer on Ni‐Rich Layered Cathodes to Enhance the Cycle Stability of Lithium‐Ion Batteries

Insights into Capacity Fading Mechanism and Coating Modification of High-Nickel Cathodes in Lithium-Ion Batteries

Tuning Dopant Distribution for Stabilizing the Surface of High‐Nickel Layered Oxide Cathodes for Lithium‐Ion Batteries

Aluminum and Indium Co‐Modified Ni‐Rich Layered Cathode with Enhanced Microstructure and Surface Stability for Lithium‐Ion Batteries

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Pushing High Capacity with Thermodynamically Stable Interface for Single Crystalline Nickel-rich Cathode

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Improving the Electrochemical Performance of Ultrahigh-Nickel-based Layered LiNi0.95Mn0.05O2 Cathode Through Cobalt Modification for Next-Generation High-Energy Li-ion Batteries

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes