Abstract:Blending high-permittivity (εr) ceramic powders or conductive fillers into polymers to form 0-3-type composites has been regarded as one of the most promising processes to achieve high-dielectric-permittivity materials with excellent processing performance. The high dielectric loss and conductivity induced by the interface between the matrix and fillers as well as the leakage current have long been a great challenge of dielectric composites, and the resolution of these challenges is still an open question. In this work, poly(vinylidenefluoride-trifluorethylene with double bonds)/graphene nanosheets (P(VDF-TrFE-DB)/GNS) terpolymer nanocomposites were fabricated via a solution-cast process. GNSs were functionalized with KH550 to improve the dispersion in the terpolymer matrix solution and crosslinked with P(VDF-TrFE-DB) by a free-radical addition reaction in the nanocomposites. Compared with neat terpolymer, significantly increased dielectric permittivity and a low loss were observed for the composites. For instance, at 1 kHz the P(VDF-TrFE-DB)/GNS composites with 4 vol % GNS possessed a dielectric permittivity of 74, which is over seven times larger than that of neat terpolymer. However, a rather low dielectric loss (0.08 at 1 kHz) and conductivity (3.47 × 10(-7) S/m at 1 kHz) are observed in the P(VDF-TrFE-DB)/GNS composites containing up to 12 vol % GNS. The covalent bonding constructed between P(VDF-TrFE-DB) and GNS is responsible for the reduced aspect ratio of the GNS and the crystalline properties of P(VDF-TrFE-DB) as well as the improved compatibility between them. As a result, the high-dielectric-loss conductivity of polymer composites, mainly induced by conduction loss and the interface polarization between the matrix and filler, were effectively restricted. Meanwhile, the 3D network established between P(VDF-TrFE-DB) and GNS endows the P(VDF-TrFE-DB)/GNS composites at high temperature with excellent mechanical and dielectric properties. Besides preparing high-performance dielectric composites, this facile route may also be utilized to fabricate high-performance nanocomposites by inhibiting the poor compatibility between fillers and polymeric matrix.

Permittivity and Dielectric Loss Balance of PVDF/K1.6Fe1.6Ti6.4O16/MWCNT Three-Phase Composites

Significantly Enhanced Balance of Dielectric Properties of Polyvinylidene Difluoride Three-Phase Composites by Silver Deposited on K2Ni0.93Ti7.07O16 Hollandite Nanoparticles

High-k Three-Phase Epoxy/K1.6(Ni0.8Ti7.2)O16/CNT Composites with Synergetic Effect

Batio3-Carbon Nanotube/Polyvinylidene Fluoride Three-Phase Composites With High Dielectric Constant And Low Dielectric Loss

Preparation of Batio3-Mwnt/Polyvinylidene Fluoride Three-Phase Composites with Novel Dielectric Behavior

Large Dielectric Constant and High Thermal Conductivity in Poly(vinylidene Fluoride)/barium Titanate/silicon Carbide Three-Phase Nanocomposites.

Study on Dielectric Behavior of a Three-Phase CF/(PVDF + BaTiO3) Composite

High Dielectric Performance Composites with a Hybrid BaTiO3/Graphene As Filler and Poly(vinylidene Fluoride) As Matrix

Enhanced Dielectric Performance of Three Phase Percolative Composites Based on Thermoplastic-Ceramic Composites and Surface Modified Carbon Nanotube

Facile Preparation and Properties of Polyvinylidene Fluoride Dielectric Nanocomposites Via Phase Morphology Control and Incorporation of Multiwalled Carbon Nanotubes Conductive Fillers

Enhanced dielectric performance in flexible MWCNT/poly(vinylidene fluoride-co-hexafluoropropene)-based nanocomposites by designing a tri-layered structure

Chemical bonding-induced low dielectric loss and low conductivity in high-K poly(vinylidenefluoride-trifluorethylene)/graphene nanosheets nanocomposites.

Modified Poly(phenylene Oxide)/(casr)tio3 Composites with Ultrahigh Permittivity and Low Loss for Microwave Substrates

Hierarchical-structured Dielectric Permittivity and Breakdown Performances of Polymer-Ceramic Nanocomposites

Modified poly(phenylene oxide)/(CaSr)TiO 3 composites with ultrahigh permittivity and low loss for microwave substrates

High Dielectric Permittivity And Low Dielectric Loss Nanocomposites Based On Poly(Vdf-Trfe-Ctfe) And Graphene Nanosheets

Characterization and performance of plate-like Ba0.6Sr0.4TiO3/Poly(vinylidene fluoride – trifluoroethylene -chlorotrifluoroethylene) composites with high permittivity and low loss

Enhanced Dielectric Properties of Polyvinylidene Fluoride Nanocomposites Via Calcium Copper Titanate Nanofibers

The Preparation and Properties of BaTiO3-carbon Nanotube/polyimide Three-Phase Composites by In-situ Polymerization for Flexible Package Circuit

Giant Dielectric Permittivity Nanocomposites: Realizing True Potential of Pristine Carbon Nanotubes in Polyvinylidene Fluoride Matrix Through an Enhanced Interfacial Interaction

High-k Composites with Sandwich Structure by Introducing a Negative Permittivity Layer with Ni As Conductive Filler