Abstract:Remarkably improved dielectric properties including high-k, low loss, and high breakdown strength combined with promising mechanical performance such as high flexibility, good heat, and chemical resistivity are hard to be achieved in high-k dielectric composites based on the current composite fabrication strategy. In this work, a family of high-k polymer nanocomposites has been fabricated from a facile suspension cast process followed by chemical cross-linking at elevated temperature. Internal double bonds bearing poly(vinylidene fluoride-chlorotrifluoroethylene) (P(VDF-CTFE-DB)) in total amorphous phase are employed as cross-linkable polymer matrix. α-SiC particles with a diameter of 500 nm are surface modified with 3-aminpropyltriethoxysilane (KH-550) as fillers for their comparable dielectric performance with PVDF polymer matrix, low conductivity, and high breakdown strength. The interface between SiC particles and PVDF matrix has been finely tailored, which leads to the significantly elevated dielectric constant from 10 to over 120 in SiC particles due to the strong induced polarization. As a result, a remarkably improved dielectric constant (ca. 70) has been observed in c-PVDF/m-SiC composites bearing 36 vol % SiC, which could be perfectly predicted by the effective medium approximation (EMA) model. The optimized interface and enhanced compatibility between two components are also responsible for the depressed conductivity and dielectric loss in the resultant composites. Chemical cross-linking constructed in the composites results in promising mechanical flexibility, good heat and chemical stability, and elevated tensile performance of the composites. Therefore, excellent dielectric and mechanical properties are finely balanced in the PVDF/α-SiC composites. This work might provide a facile and effective strategy to fabricate high-k dielectric composites with promising comprehensive performance.

High-k Composites with Sandwich Structure by Introducing a Negative Permittivity Layer with Ni As Conductive Filler

Fabrication of Negative Index Materials Using Dielectric and Metallic Composite Route

The simultaneously achieved high permittivity and low loss in tri-layer composites via introducing negative permittivity layer

Negative permittivity at kHz regulated by length-diameter ratio of short carbon fibers in phenolic resin composites

Negative-k and positive-k layers introduced into graphene/polyvinylidene fluoride composites to achieve high-k and low loss

Bilayer dielectric composites with positive-ε and negative-ε layers achieving high dielectric constant and low dielectric loss

Polyvinyl alcohol/carbon fibers composites with tunable negative permittivity behavior

Facile and Efficient Negative Permittivity Realization of Copper Microwire Polymer Metacomposites at X-Band Frequency

A Rational Design of Core-Shell-satellite Structured BaTiO3 Fillers for Epoxy-Based Composites with Enhanced Microwave Dielectric Constant and Low Loss

Weak Epsilon-Negative Silver Nanowires/polyimide Metacomposites with Extremely Low Losses

Tailorable high-k and negative-k percolation behaviors in PPy/P(VDF-HFP) composites

Flexible Multi-Walled Carbon Nanotubes/polyvinylidene Fluoride Membranous Composites with Weakly Negative Permittivity and Low Frequency Dispersion

A study of preparation and properties of epoxy resin/carbon fiber/phenolic residual carbon composites with adjustable negative permittivity behavior

High Dielectric Permittivity And Low Dielectric Loss Nanocomposites Based On Poly(Vdf-Trfe-Ctfe) And Graphene Nanosheets

Polymer/metal multi-layers structured composites: A route to high dielectric constant and suppressed dielectric loss

Recent advances in radio-frequency negative dielectric metamaterials by designing heterogeneous composites

Polymer composites with balanced dielectric constant and loss via constructing trilayer architecture

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Experimental realization of tunable negative permittivity in percolative Fe78Si9B13/epoxy composites

Percolation-Triggered Negative Permittivity in Nano Carbon Powder/Polyvinylidene Fluoride Composites

Sandwich‐structured dielectrics constructed from carbon nanotube and polyarylene ether nitrile composite layers demonstrating positive and negative permittivity