Abstract:Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2μm Sa) was achieved at the optimised settings (fluence of 9J/cm2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps and irregularities that were prevalent on the as-received stainless steel samples. The optimised laser polishing technology was consequently implemented for serial finishing of structured 3D printed mesoscale SS316L components. This led to substantial reductions in areal Sa and St parameters by 75% (0.489–0.126μm) and 90% (17.71–1.21μm) respectively, without compromising the geometrical accuracy of the native 3D printed samples.

A mini vibrational polishing machine produced by 3D printing

A precision dimple grinder-polisher produced by 3D printing

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Design of a Compact 3-D Vibration-Assisted Turning Device with Large Amplitude and High Frequency for Diversified Microstructure Sculpturing

High-Efficiency High-Resolution Multimaterial Fabrication For Digital Light Processing-Based Three-Dimensional Printing

3D printing of zirconia via digital light processing: optimization of slurry and debinding process

A New 3D Printing Method Based on Non-Vacuum Electron Beam Technology

3D printing of functional polymers for miniature machines

High-Performance Materials for 3D Printing in Chemical Synthesis Applications

3D Printing Macroscale Engineered Materials Using Ultrasound Directed Self‐Assembly and Stereolithography

Laser polishing of 3D printed mesoscale components

Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers

Towards Microscale Electrohydrodynamic Three-Dimensional Printing

A Novel Desktop Device for Lapping Milled Micro Thin-Walled Structures

Near thermal-electric field controlled electrohydrodynamic 3D printing of high aspect ratio microstructures

3D Printing via material extrusion on an acoustic air bed

Design, Testing, and Experimental Validation of a Rotary Vibration-Assisted Polishing Device (RVAPD) for Enhanced Machining and Surface Quality

A novel approach of jet polishing for interior surface of small grooved components using three developed setups

High-Quality Surface Finishing of Industrial Three-Dimensional Metal Additive Manufacturing Using Electrochemical Polishing

Determining the influence of technological parameters of the electron-beam surfacing process on quality indicators