Abstract:A magnetic bearing system is a crucial component in a third-generation blood pump, particularly when we consider aspects such as system durability and blood compatibility. Many factors such as efficiency, occupying volume, hemodynamic stability in the flow path, mechanical stability, and stiffness need to be considered for the use of a magnetic bearing system in a third-generation blood pump, and a number of studies have been conducted to develop novel magnetic bearing design for better handling of these factors. In this study, we developed and evaluated a new magnetic bearing system having a motor for a new third-generation blood pump. This magnetic bearing system consists of a magnetic levitation compartment and a brushless direct current (BLDC) motor compartment. The active-control degree of freedom is one; this control is used for controlling the levitation in the axial direction. The levitation in the radial direction has a passive magnetic levitation structure. In order to improve the system efficiency, we separated the magnetic circuit for axial levitation by using a magnetic circuit for motor drive. Each magnetic circuit in the bearing system was designed to have a minimum gap by placing mechanical parts, such as the impeller blades, outside the circuit. A custom-designed noncontact gap sensor was used for minimizing the system volume. We fabricated an experimental prototype of the proposed magnetic bearing system and evaluated its performance by a control system using the Matlab xPC Target system. The noncontact gap sensor was an eddy current gap sensor with an outer diameter of 2.38 mm, thickness of 0.88 mm, and resolution of 5 µm. The BLDC motor compartment was designed to have an outer diameter of 20 mm, length of 28.75 mm, and power of 4.5 W. It exhibited a torque of 8.6 mNm at 5000 rpm. The entire bearing system, including the motor and the sensor, had an outer diameter of 22 mm and a length of 97 mm. The prototype exhibited sufficient levitation performance in the stop state and the rotation state with a gap of 0.2 mm between the rotor and the stator. The system had a steady position error of 0.01 µm in the stop state and a position error of 0.02 µm at a rotational speed of 5000 rpm; the current consumption rates were 0.15 A and 0.17 A in the stop state and the rotation state, respectively. In summary, we developed and evaluated a unique magnetic bearing system with an integrated motor. We believe that our design will be an important basis for the further development of the design of an entire third-generation blood pump system.

Dynamic Evaluation of an Active Axial Magnetic Levitated Bearing System in a Hemocompatibility Assessment Platform

Numerical and Experimental Analysis for a Magnetic Levitation System in a Hemocompatibility Assessment Platform

Blood-contacting magnetic levitation bearing design using computational fluid dynamics for haemocompatibility

Hemocompatibility Assessment Platform Drive System Design: Trade-off between Motor Performance and Hemolysis

Development of a prototype magnetically suspended rotor ventricular assist device

A sealless centrifugal blood pump with passive magnetic and hydrodynamic bearings

Optimization of a miniature Maglev ventricular assist device for pediatric circulatory support

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

A magnetic bearing system for a continuous ventricular assist device

Parameter estimation and actuator characteristics of hybrid magnetic bearings for axial flow blood pump applications

Adaptive Proportional Derivative Control for Magnetic Bearing in Full Maglev Left Ventricular Assist Device

CFD-Based Flow Channel Optimization and Performance Prediction for a Conical Axial Maglev Blood Pump

Hemocompatibility and hemodynamic comparison of two centrifugal LVADs: HVAD and HeartMate3

Development of magnetic bearing system for a new third-generation blood pump

Performance of a continuous flow ventricular assist device: magnetic bearing design, construction, and testing

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

A Fast Building and Effective Hydraulic Pediatric Mock Circulatory System for the Evaluation of A Left Ventricular Assist Device

Computational characterization of flow and blood damage potential of the new maglev CH-VAD pump versus the HVAD and HeartMate II pumps

Lifeflow vad: design and numerical modeling of magnetic bearing system

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Dynamic Analysis for the Rotor Drop Process and Its Application to a Vertically Levitated Rotor/Active Magnetic Bearing System