Abstract:Large timber buildings, formed from both light and heavy timber construction, are becoming increasingly common in Europe. Many multiple-occupancy timber buildings, such as apartment blocks, are now constructed to greater heights and in densely populated urban locations. The fire-resistance performance of such timber buildings is generally related to the standard fire test. Alternatively, EN 1995-1-2 may be used to demonstrate fire resistance by means of calculation or numerical modelling. The latter is currently limited to standard fire exposure. In addition, modelling approaches are often avoided as many numerical codes do not normally offer the capability to model timber exposed to fire. The most obvious barrier is incorporating the different tensile and compressive strength/stiffness degradation with increasing temperature. Unlike many other structural materials, it is not possible to define a single relationship between timber Modulus of Elasticity (MoE) and temperature. When timber design is advanced to a ‘performance-based’ level further complexities will arise. For example, the definition of structure temperatures for non-standard fires is a difficult task, and assessment of strength/stiffness degradation on the basis of temperature alone is not sufficient due to char formation. As a result, when cooling is considered, material properties based upon stress state, temperature and temperature history are needed. To address the above limitations, a number of developments, which can be used with general FEA software, such as DIANA, to design timber structures for fire, are presented. The developments are incorporated via user-supplied subroutines written in FORTRAN code. The routines include code for determining MoE and strength based upon stress state, temperature and temperature history. They are implemented as part of a total strain-based constitutive model. The implementation of the routines is demonstrated using a simple continuous beam. The example is also used to demonstrate how compartmentation provisions and aspects of whole building behaviour can be used to better design large-section timber buildings. Comparisons are made with simple empirical approaches presented in EN 1995-1-2. Extensions to ‘performance-based design’ using parametric fires are also discussed.

Modelling the fire resistance of cross‐laminated timber rib panels

The Structural Behaviour of Cross-Laminated Timber Rib Panels in Fire

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Bending Performance of Nail-Laminated Bamboo-Timber Panels Made with Glubam and Fast-Grown Plantation Chinese Fir

Experimental and numerical analysis on fire behaviour of loaded cross-laminated timber panels

Thermal Performance of Cross-Laminated Timber (CLT) and Cross-Laminated Bamboo and Timber (CLBT) Panels

Experimental and Numerical Analysis of Residual Load-Carrying Capacity of Cross-Laminated Timber Walls after Fire

Advanced Fire Design of Timber Structures Using Computational Techniques - Simple Indeterminate Structures

Full-Scale Fire Experiments on Cross-Laminated Timber Residential Enclosures Featuring Different Lining Protection Configurations

Residual compressive load-carrying capacity of cross-laminated timber walls after exposed to one-side fire

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Influence of densification on structural performance and failure mode of cross-laminated timber under bending load

Experimental investigation of glued-laminated timber beams with Vectran-FRP reinforcement

Experimental and Numerical Column Buckling Analysis of Hardwood Cross-Laminated Timber Panels

Experimental study on the fire resistance of all-composite and hybrid web-core sandwich panels for building floors

Application of Transformed Cross-Section Method for Analytical Analysis of Laminated Veneer Lumber Beams Strengthened with Composite Materials

Effect of protective cladding on the fire performance of vertically loaded cross-laminated timber (CLT) wall panels

Bending performance of domestic larch cross-laminated timber reinforced with fiber-reinforced polymer

A Pilot Study on Cross-Laminated Bamboo and Timber Beams

Three-dimensional finite element modelling OF the fire response of passive and prestressed near-surface mounted (NSM)–cfrp-strengthened reinforced concrete slab strips

Experimental investigation of structural failure during the cooling phase of a fire: Timber columns