Abstract:The effect of 0.5at% Ag and its combination with 0.4at% Zn on the precipitation hardening behavior of Mg-1.5Sn-0.5Mn (at%) alloy have been investigated using hardness measurements and transmission electron microscopy (TEM). The results show that sole addition of Ag can remarkably improve the peak hardness from 58HV to 77HV after ageing at 200°C, which is attributed to the increased number density, the size and so the volume fraction of the Mg 2Sn lath precipitates. A combination addition of Ag and Zn further improves the peak-hardness to 83HV and the time to peak hardness has been reduced from 120h to 100h. The joint addition of Ag and Zn both increases the number density and refines the Mg 2Sn precipitates. Zn also promotes the Mg 2Sn precipitates lying on the non-basal plane of matrix, as well as the blocky Mg 54Ag 17 phase which has an orientation relationship with α-Mg matrix as (001) e{open}'//(0001) α, [200] e{open}'//[-1-120] α, [0-20] e{open}'//[1-100] α. In the peak-aged Ag modified alloys, Ag atoms are segregated in the Mg 2Sn precipitates. Nucleation, growth and coarsening of the Mg 2Sn precipitates simultaneously occur as the ageing proceeds. The growth of Mg 2Sn precipitates exhibits a significant anisotropic behavior. Addition of Ag can promote the precipitation process during the underage period and retarding the growth of Mg 2Sn during the overage period, leading to a more thermal stable microstructure of the Ag and Ag+Zn modified alloys, from which only a small hardness decrease after 700h ageing is detected. © 2012 Elsevier B.V.

Effect of Sn contents on natural aging and precipitation hardening in Al-Mg-Si alloys

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Effect of the natural aging time on the age-hardening response and precipitation behavior of the Al-0.4Mg-1.0Si-(Sn) alloy

Effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloys with different Mg/Si ratios

Effect of a Trace Addition of Sn on the Aging Behavior of Al–Mg–Si Alloy with a Different Mg/Si Ratio

Hardening and precipitation behavior of as-quenched Al–0.4Mg–1.0Si alloy with minor Sn addition at different aging temperatures

The Combined Effect of Pre-Aging and Sn Addition on Age Hardening Response and Precipitation Behavior of Al-1.0Mg-0.6Si (−0.3cu) Alloy

Combined effect of Sn addition and pre-ageing on natural secondary and artificial ageing of Al–Mg–Si alloys

Effects of Mg2Sn precipitation on the age-hardening and deformation behaviour of a Mg-Sn-Al-Zn alloy

The role of Sn element on the deformation mechanism and precipitation behavior of the Al–Cu–Mg alloy

Sn-Sc microalloying-induced property improvement and micromechanisms of an Al-Mg-Si alloy

The effect of Zn content on the microstructure and mechanical properties of the Al-mg-Si alloy

Effect of Sn Addition on the Microstructure and Mechanical Properties of AZ31 Alloys

Improvement of mechanical properties of hot extruded and age treated Mg–Zn–Mn–Ca alloy through Sn addition

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Influence of Zn Addition on the Aging Precipitate Behavior and Mechanical Properties of Al-Cu-Li Alloy

Effect of In addition on the precipitation behavior and mechanical property for Al-Mg-Si alloys

Sn and Cu influence on Mg:Si ratios evolution in clusters based on DFT and its impact on precipitation hardening of pre-aged Al-1.0Mg-0.6Si alloys

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg−8Li−3Al−(1,2,3)Sn alloys

Enhancement of Hardening and Thermal Resistance of Mg–Sn-based Alloys by Addition of Cu and Al

Influence of Sn and Zn on age-hardening behavior of Mg-6Al magnesium alloy