Abstract:Numerous studies have been reported in literature for plate anchors in saturated or dry clays. However, in practical scenario the soil overlying the anchor plate in most of the cases is in unsaturated state, and even then, no study seems to be available for anchors in unsaturated soil. The uplift capacity depends on the resistance of soil overlying the anchor plate, which is in turn affected by the shear strength of soil and varies with variation in the matric suction owing to changes in surface flux conditions and position of the water table. Hence, it has been planned to study the uplift capacity of horizontal strip plate anchors buried in unsaturated clay in this paper. The stress-based limit analysis with the help of finite elements and second-order cone programming has been used for performing the analysis considering the variation of matric suction with depth above the water table under various surface flow conditions (evaporation, no flow and infiltration). Unified effective stress approach-based modified Mohr–Coulomb yield criterion was used to include the influence of stress due to matric suction to the ultimate failure state. The uplift capacity was expressed in terms of a non-dimensional uplift capacity factor, which has been found to be dependent on the embedment depth-to-width ratio of anchor, shear strength parameters of soil, water table position, various flow conditions and their flow rate. The effect of other parameters like air-entry pressure and pore-size distribution parameters, degree of saturation, specific gravity of soil solids, and soil–anchor interface roughness has also been examined and was found to be insignificant. The solutions were presented for an immediate breakaway condition, i.e., considering that the contact between anchor and underlying soil mass is separated at ultimate failure.

Analysis of anchor uplift capacity in spatially varying soil using MARS model

Probabilistic assessment of anchor foundation for transmission tower using multivariate adaptive regression splines

Use of Multivariate Adaptive Regression Splines (MARS) in the Performance Prediction of Anti-floating Anchors

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

Probabilistic Evaluation of Ground-Support Interaction for Deep Rock Excavation Using Artificial Neural Network and Uniform Design

Monotonic Uplift Behavior of Anchored Pier Foundations in Soil Overlying Rock

Probabilistic Design Analysis of Plate Anchors in Spatially Variable Clay

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Prediction of Load-Displacement Performance of Grouted Anchors in Weathered Granites Using FastICA-MARS As a Novel Model

Unraveling seismic uplift behavior of plate anchors in frictional-cohesive soils: A comprehensive analysis through stability factors and machine learning

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Hybrid ELM and MARS-Based Prediction Model for Bearing Capacity of Shallow Foundation

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Probabilistic stability analysis of earth dam slope under transient seepage using multivariate adaptive regression splines

Bearing Performance of a Novel Caisson-Plate Gravity Anchor

Uplift capacity of strip plate anchors in unsaturated clay

Probabilistic approach to the stability analysis of caisson foundations under combined loading in spatially variable soil

Coupling FELA and computation intelligent in predicting behaviour of inclination strip anchor in anisotropic and heterogeneous clays

The Bearing Capacity of Spudcan Foundations under Combined Loading in Spatially Variable Soils

A limit analysis approach to uplift bearing capacity of shallow plate anchors in marine environments