Abstract:Upper bound plastic limit analyses (PLA) can provide a useful framework for estimating the load capacity of suction caisson anchors in purely cohesive soils. Since arbitrary assumptions regarding the soil stress state are not required in the PLA formulation, it may be used with greater consistency compared to other simplified approaches such as limit equilibrium methods. While PLA methods do not attempt to include all of the complexities of anchor behavior, they can provide a relatively simple framework for visualizing anchor kinematics leading to an understanding of the relative importance of various parameters on suction anchor load capacity. The most rigorous PLA formulations involve postulating a three-dimensional anchor-soil failure mechanism and deriving expressions for internal energy dissipation throughout the mechanism. This approach can involve extensive numerical integrations and a relatively complex scheme for optimizing the failure mechanism to obtain a least upper bound collapse load. Considerable simplification is possible if the problem is formulated in terms of ultimate unit resistances (lateral, axial, and their interaction) that can be exerted by the soil on the caisson. In this case the caisson failure mechanism can be characterized in terms of one or two optimization variables. Simple expressions for the ultimate unit resistances acting on the caisson can be obtained from several sources including rigorous PLA solutions, finite element techniques, or experimental measurements. General expressions are possible by limiting consideration to common, idealized strength profiles such as uniform or constant gradient. Such simplified formulations are particularly valuable for providing an analysis tool accessible to practicing engineers. Suction caisson anchors can be subjected to a variety of load orientations including nearly vertical uplift forces imposed by the vertical tendons of tension leg platforms, horizontal loads imposed by catenary mooring systems, and inclined loads imposed by taut moorings. Recently, PLA methods have been applied to the analysis of suction caissons subjected to this range of loading conditions. This paper reviews the formulation of these analyses and summarizes the most significant findings.

Uplift capacity of strip plate anchors in unsaturated clay

Capacity of plate anchors in clay under sustained uplift

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

Dynamic Installation Behaviors of A New Hybrid Plate Anchor in Layered Marine Clay

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Behaviors of Drag Embedment Anchor in Layered Clay Profiles

Monotonic Uplift Behavior of Anchored Pier Foundations in Soil Overlying Rock

A limit analysis approach to uplift bearing capacity of shallow plate anchors in marine environments

Behavoir Of Installation For Suction Anchor In Soft Clay

Numerical study on uplift capacity and behavior of plate anchor considering different dilation angles

Influence of shaft diameter and soil rigidity on uplift capacity factor of circular plate anchor in uniform clay

Experimental and Numerical Investigation of Uplift Behavior of Umbrella-Shaped Ground Anchor

Effect of soil deformability on the failure mechanism of shallow plate or screw anchors in sand

Distribution Pattern of Anchorage Stress and Water Sensitivity Analysis of Red Clay

Probabilistic Design Analysis of Plate Anchors in Spatially Variable Clay

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Bearing Performance of a Novel Caisson-Plate Gravity Anchor

Simplified Limit Solutions for Undrained Capacity of Suction Anchors

Experimental Study on Uplift Behavior of Shallow Anchor Plates in Geogrid-Reinforced Soil

Unraveling seismic uplift behavior of plate anchors in frictional-cohesive soils: A comprehensive analysis through stability factors and machine learning

Uplift Behavior of Pipes and Strip Plate Anchors in Sand