Abstract:Purpose Fused filament fabrication (FFF) is a popular technique in rapid prototyping capable of building complex structures with high porosity such as cellular solids. The study of cellular solids is relevant by virtue of their enormous potential to exhibit non-traditional deformation mechanisms. The purpose of this study is to exploit the benefits of the FFF technology to fabricate re-entrant honeycomb structures using thermoplastic polyurethane (TPU) to characterize their mechanical response when subjected to cyclic compressive loadings. Design/methodology/approach Specimens with different volume fraction were designed, three-dimensionally printed and tested in uniaxial cyclic compressions up until densification strain. The deformation mechanism and apparent elastic moduli variation throughout five loading/unloading cycles in two different loading orientations were studied experimentally. Findings Experimental results demonstrated a nonlinear relationship between volume fraction and apparent elastic modulus. The amount of energy absorbed per loading cycle was computed, exhibiting reductions in energy absorbed of 12%–19% in original orientation and 15%–24% when the unit cells were rotated 90°. A softening phenomenon in the specimens was identified after the first compression when compared to second compression, with reduction in apparent elastic modulus of 23.87% and 28.70% for selected samples V 3 and H 3 , respectively. Global buckling in half of the samples was observed, so further work must include redesign in the size of the samples. Originality The results of this study served to understand the mechanical response of TPU re-entrant honeycombs and their energy absorption ability when compressed in two orientations. This study helps to determine the feasibility of using FFF as manufacturing method and TPU to construct resilient structures that can be integrated into engineering applications as crash energy absorbers. Based on the results, authors suggest structure's design optimization to reduce weight, higher number of loading cycles (n > 100) and crushing velocities (v > 1 m/s) in compression testing to study the dynamic mechanical response of the re-entrant honeycomb structures and their ability to withstand multiple compressions.

3D printing thermoplastic polyurethane hierarchical cellular foam with outstanding energy absorption capability

3D-printed thermoplastic polyurethane/polyvinylidene fluoride gradient stiffness and hierarchical cellular structures with tailored energy absorption behavior

Development of microcellular thermoplastic polyurethane honeycombs with tailored elasticity and energy absorption via CO2 foaming

3D‐Printed Polyurethane Tissue‐Engineering Scaffold with Hierarchical Microcellular Foam Structure and Antibacterial Properties

A new microcellular foaming strategy to develop structure-gradient thermoplastic polyurethane foams with enhanced elasticity

Cellular Thermoplastic Polyurethane Thin Film: Preparation, Elasticity, and Thermal Insulation Performance

Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities

Sunflower Pith Inspired Dual-Gradient Cellular Polyurethane Architecture with Amplified Mechanical Functions

Investigation of the performance of the structure and energy absorption in sandwich panels of PLA/TPU manufactured by the FFF technique

Mechanical dependence of 3D-printed thermoplastic polyurethane reinforced with minor continuous carbon fibres

Energy Absorption and Stiffness of Thin and Thick-Walled Closed-Cell 3D-Printed Structures Fabricated from a Hyperelastic Soft Polymer

Mechanical Characteristics of Multi-Level 3D-Printed Silicone Foams

Effect of Absorbent Foam Filling on Mechanical Behaviors of 3D-Printed Honeycombs

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Experimental characterization of the mechanical properties of 3D printed TPU auxetic cellular materials under cyclic compressive loadings

Highly Compressible Polymer Composite Foams with Thermal Heating-Boosted Electromagnetic Wave Absorption Abilities.

Multi-hierarchical flexible composites towards superior fire safety and electromagnetic interference shielding

A novel semi-continuous preparation mode of ultra-low density thermoplastic polyurethane foam