Effect of Absorbent Foam Filling on Mechanical Behaviors of 3D-Printed Honeycombs

Leilei Yan,Keyu Zhu,Yunwei Zhang,Chun Zhang,Xitao Zheng

DOI: https://doi.org/10.3390/polym12092059

IF: 5

2020-09-10

Polymers

Abstract:Polylactic acid (PLA) hexagonal honeycomb structures were fabricated by using 3D-printing technology. By filling with absorbent polymethacrylimide (PMI) foam, a novel absorbent-foam-filled 3D-printed honeycomb was obtained. The in-plane (L- and W-direction) and out-of-plane (T-direction) compressive performances were studied experimentally and numerically. Due to absorbent PMI foam filling, the elastic modulus, compressive strength, energy absorption per unit volume, and energy absorption per unit mass of absorbent-foam-filled honeycomb under L-direction were increased by 296.34%, 168.75%, 505.57%, and 244.22%, respectively. Moreover, the elastic modulus, compressive strength, energy absorption per unit volume, and energy absorption per unit mass, under W-direction, also have increments of 211.65%, 179.85, 799.45%, and 413.02%, respectively. However, for out-of-plane compression, the compressive strength and energy absorption per unit volume were enhanced, but the density has also been increased; thus, it is not competitive in energy absorption per unit mass. Failure mechanism and dimension effects of absorbent-foam-filled honeycomb were also considered. The approach of absorbent foam filling made the 3D-printed honeycomb structure more competitive in electromagnetic wave stealth applications, while acting simultaneously as load-carrying structures.

polymer science

What problem does this paper attempt to address?

This paper mainly discusses the influence of filling with water-absorbing polymethacrylimide (PMI) foam on the mechanical properties of 3D printed honeycomb structures. The study used 3D printing technology to manufacture hexagonal honeycomb structures using polylactic acid (PLA), and filled them with water-absorbing PMI foam to create a new type of water-absorbing foam-filled 3D printed honeycomb structure. Experimental and numerical simulation methods were used to investigate the compression performance of this structure in-plane (L- and W-direction) and out-of-plane (T-direction). Filling with water-absorbing PMI foam significantly improved the elastic modulus, compressive strength, specific energy absorption, and specific energy absorption per unit mass of the honeycomb structure. In the L-direction, these properties increased by 296.34%, 168.75%, 505.57%, and 244.22% respectively. In the W-direction, they increased by 211.65%, 179.85%, 799.45%, and 413.02% respectively. However, in out-of-plane compression, although the compressive strength and specific energy absorption per unit volume increased, the specific energy absorption per unit mass did not have a competitive advantage due to the increase in density. The paper also considered the filling effect and failure mechanism, pointing out that filling with foam makes the 3D printed honeycomb structure more competitive in applications such as electromagnetic wave invisibility and as load-bearing structures. The research results are of significant importance for lightweight multifunctional design, especially for applications that combine load-bearing capacity and electromagnetic wave absorption.

Effect of Absorbent Foam Filling on Mechanical Behaviors of 3D-Printed Honeycombs

Investigation of the energy absorption capacity of foam-filled 3D-printed glass fiber reinforced thermoplastic auxetic honeycomb structures

Effect of plate lattice-filling on the compressive mechanical property of 3D-printed square honeycombs

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption

Mechanical and energy absorption properties of 3D-printed honeycomb structures with Voronoi tessellations

Effect of varying core density and material on the quasi‐static behaviors of sandwich structure with 3D‐printed hexagonal honeycomb core

Fabrication of a novel continuous fiber 3D printed thermoset all-composite honeycomb sandwich structure with polymethacrylimide foam reinforcement

Compression behavior and energy absorption of 3D printed continuous fiber reinforced composite honeycomb structures with shape memory effects

3D-printed thermoplastic polyurethane/polyvinylidene fluoride gradient stiffness and hierarchical cellular structures with tailored energy absorption behavior

Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure

Experimental and numerical study of in-plane uniaxial compression response of PU foam filled aluminum arrowhead auxetic honeycomb

Mechanical properties of foam-filled hexagonal and re-entrant honeycombs under uniaxial compression

Effect of 3D-Printed Honeycomb Core on Compressive Property of Hybrid Energy Absorbers: Experimental Testing and Optimization Analysis

Mechanical properties of additively manufactured octagonal honeycombs

3D printed honeycomb bilayer structures based on polylactic acid as lightweight microwave absorbing materials

Enhancement by Metallic Tube Filling of the Mechanical Properties of Electromagnetic Wave Absorbent Polymethacrylimide Foam

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture