Abstract:Silicon nanotubes (SNTs) are very attractive in the fields of energy, catalysis, and sensors, but a facile template- and/or catalyst-free preparation method is still absent. Herein, we study a controllable and cost-effective approach for preparing SNTs by electrochemically reducing layer-structured calcium silicate (CaSiO3) in molten CaCl2/NaCl without any template and catalyst. The underlying mechanism of the SNT formation is uncovered: the layer-structured CaSiO3 is first electrochemically exfoliated into SiOx (0 < x < 2) sheets while releasing CaO into the molten salts, and then the SiOx sheets are electrochemically reduced and simultaneously crimped into SNTs. The diameter (120–312 nm) and wall thickness (∼40 nm) of the SNTs can be tailorable by manipulating the reduction potential between −1.28 and −1.48 V (vs Ag/AgCl). Lastly, the electrolytic SNTs show a high lithium storage capacity of 3737 mAh g–1 at 0.2 A g–1, a high rate capability of 1371 mA h g–1 at 10 A g–1, and stable cycling with a capacity of 974 mAh g–1 after 600 cycles at 1 A g–1. Overall, the template- and catalyst-free electrochemical method provides a straightforward and facile way to prepare SNTs with a brand-new mechanism that can be applied to other tubular structure materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07031?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07031</a>.TEM image, SAED, and EDS of CaSiO3 electrolyzed at −1.1 V for 12 h; XRD patterns of the quartz substrate that holds the samples; SEM images and Raman spectrum of electrolytic products at −1.39 V for 12 h; SEM images of the electrolytic products at −1.35 V for 12 h; SEM image of the electrolysis product of silica particles; SEM images and EDS spectrum of samples prepared at −1.39 V for 3 and 6 h; CV curves of the SNT electrode; cycling performance of commercial SNPs; cycling performance of commercial SNPs; SEM images of SNT and SNP electrodes before and after cycling; charge/discharge profile and cycling performance of the SNTs||LCO full cell at 1 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07031/suppl_file/am1c07031_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Silicate-Mediated Electrolytic Silicon Nanotube from Silica in Molten Salts

Template-Free Electrochemical Formation of Silicon Nanotubes from Silica

Fabricating Silicon Nanotubes by Electrochemical Exfoliation and Reduction of Layer-Structured CaSiO3 in Molten Salt.

Electrochemical Conversion of Silica Nanoparticles to Silicon Nanotubes in Molten Salts: Implications for High-Performance Lithium-Ion Battery Anode

Fabricating Silicon Nanotubes by Electrochemical Exfoliation and Reduction of Layer-Structured CaSiO 3 in Molten Salt

Self‐Assembly of Silicon Nanotubes Driven by a Biphasic Transition from the Natural Mineral Montmorillonite in Molten Salt Electrolysis

Controllable synthesis of one-dimensional silicon nanostructures based on the dual effects of electro-deoxidation and the Kirkendall effect

Low-Temperature Molten-Salt Production of Silicon Nanowires by the Electrochemical Reduction of CaSiO3

Preparation of High-Purity Straight Silicon Nanowires by Molten Salt Electrolysis

Electrolytic preparation of porous TiSi2/Si nanocomposites and the electrochemical performances as lithium-ion battery anode

Silicon nanotube anode for lithium-ion batteries

Low-Cost Fabrication of Silicon Nanowires by Molten Salt Electrolysis and Their Electrochemical Performances as Lithium-Ion Battery Anodes

Highly Efficient Nanostructuring of Silicon by Electrochemical Alloying/Dealloying in Molten Salts for Superb Lithium Storage.

Scalable fabrication of silicon nanotubes and their application to energy storage

Highly Efficient Synthesis of Silicon Nanowires from Molten Salt Electrolysis Cell with a Ceramic Diaphragm

Efficient Nanostructuring of Silicon by Electrochemical Alloying/Dealloying in Molten Salts for Improved Lithium Storage

Lithium-storage Properties of SiO2 Nanotubes@c Using Carbon Nanotubes As Templates

Lithium-storage properties of SiO 2 nanotubes@C using carbon nanotubes as templates

Electrodeposited Silicon Nanowires from Silica Dissolved in Molten Salts As a Binder-Free Anode for Lithium-Ion Batteries

Preparation of Sio2 Nanotubes and Nanoparticles in the Presence of L-Tartaric Acid by Sol-Gel Method and Their Electrochemical Performance for Li-Ion Batteries

Facile electrosynthesis of silicon carbide nanowires from silica/carbon precursors in molten salt