Abstract:Mammography is currently the standard imaging modality used to screen women for breast abnormalities, and, as a result, it is a tool of great importance for the early detection of breast cancer. Physical phantoms are commonly used as surrogates of breast tissue to evaluate some aspects of the performance of mammography systems. However, most phantoms do not reproduce the anatomic heterogeneity of real breasts. New fabrication technologies, such as three-dimensional (3-D) printing, have created the opportunity to build more complex, anatomically realistic breast phantoms that could potentially assist in the evaluation of mammography systems. The reproducibility and relative low cost of 3-D printed objects might also enable the development of collections of representative patient models that could be used to assess the effect of anatomical variability on system performance, hence making bench testing studies a step closer to clinical trials. The primary objective of this work is to present a simple, easily reproducible methodology to design and print 3-D objects that replicate the attenuation profile observed in real two-dimensional mammograms. The secondary objective is to evaluate the capabilities and limitations of the competing 3-D printing technologies and characterize the x-ray properties of the different materials they use. Printable phantoms can be created using the open-source code introduced, which processes a raw mammography image to estimate the amount of x-ray attenuation at each pixel, and outputs a triangle mesh object that encodes the observed attenuation map. The conversion from the observed pixel gray value to a column of printed material with equivalent attenuation requires certain assumptions and knowledge of multiple imaging system parameters, such as x-ray energy spectrum, source-to-object distance, compressed breast thickness, and average breast material attenuation. To validate the proposed methodology, x-ray projections of printed phantoms were acquired with a clinical mammography system. The quality of the printing process was evaluated by comparing the mammograms of the printed phantoms and the original mammograms used to create the phantoms. The structural similarity index and the root-mean-square error were used as objective metrics to compare the two images. A detailed description of the software, a characterization of the printed materials using x-ray spectroscopy, and an evaluation of the realism of the sample printed phantoms are presented.

Repair of acute dissection of the ascending aorta, associated with coarctation of the thoracic aorta in a Jehovah's Witness.

3D printing surgical phantoms and their role in the visualization of medical procedures

Realistic 3D printed imaging tumor phantoms for validation of image processing algorithms

EM-in-M: Analyze and Synthesize Emotion in Motion

[Differentiation of quinine from its degradation product quinotoxine].

Radioactive 3D printing for the production of molecular imaging phantoms

Reproducing two-dimensional mammograms with three-dimensional printed phantoms

3D Printed Multi-material Medical Phantoms for Needle-tissue Interaction Modelling of Heterogeneous Structures

Sarcomatous transformation of the orbit in a patient with Paget's disease.

Thermoplastic 3D printing technology using a single filament for producing realistic patient-derived breast models

Silicone phantoms fabricated with multi-material extrusion 3D printing technology mimicking imaging properties of soft tissues in CT

Dosimetric characteristics of 3D-printed and epoxy-based materials for particle therapy phantoms

Multimodal 3D Printing of Phantoms to Simulate Biological Tissue.

Design, construction, and dosimetry of 3D printed heterogeneous phantoms for synchrotron brain cancer radiation therapy quality assurance

Translating Imaging Into 3D Printed Cardiovascular Phantoms: A Systematic Review of Applications, Technologies, and Validation

On the gamma radiation response of commercially available 3D printing materials for medical dosimetry

Quality of life issues in patients with disseminated breast cancer

Geometrically complex 3D-printed phantoms for diffuse optical imaging

3D printed heterogeneous paediatric head and adult thorax phantoms for linear accelerator radiotherapy quality assurance: from fabrication to treatment delivery

AB020. Clinical characteristics and treatment of traumatic renal artery thrombosis