Abstract:The environment of an underground structure is much more complex than the above-ground environment. Erosion processes are underway in soil and groundwater; groundwater seepage and soil pressure are also typical for underground environments. Alternating layers of dry and wet soil have a strong effect on concrete, and they reduce its durability. Corrosion of cement concretes is caused by the diffusion of free calcium hydroxide, located in the pores of concrete, from the volume of the cement stone to its surface, bordering on an aggressive environment, and the further transition of the substance through the phase boundary solid (concrete)-soil-aggressive environment (liquid). Due to the fact that all minerals in cement stone exist only in saturated or close-to-saturated solutions of calcium hydroxide, a decrease in the content of which in the pores of concrete as a result of mass transfer processes causes a change in the phase and thermodynamic equilibrium in the body of concrete and leads to the decomposition of highly basic compounds of cement stone and, consequently, to the deterioration of the mechanical properties of concrete (reduction in strength, modulus of elasticity, etc.). A mathematical model of mass transfer in a two-layer plate imitating the "reinforced concrete structure-layer of the soil-coastal marine area" system is proposed as a system of nonstationary partial derivative differential equations of the parabolic type with Newmann's boundary conditions inside the building and at the interface between the soil and the marine environment and with conjugating boundary conditions at the interface between the concrete and the soil. When the boundary problem of mass conductivity in the "concrete-soil" system is solved, expressions are obtained to determine the dynamics of the concentration profiles of the target component (calcium ions) in the volumes of the concrete and soil. As a result, one can select the optimum composition of concrete, having high anticorrosion properties, to extend the durability of the concrete constructions of offshore marine structures.

Theoretical and Experimental Models to Evaluate the Possibility of Corrosion Resistant Concrete for Coastal Offshore Structures

An Engineering Method of Analyzing the Dynamics of Mass Transfer during Concrete Corrosion Processes in Offshore Structures

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

State-of-art of corrosion-induced cracking of reinforced concrete structures

Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

Probabilistic Approach for Durability Design of Concrete Structures in Marine Environments

Revised Chloride Diffusion Model of Concrete Bridge Near Coastal Areas and Its Application

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Experimental Study of the Modulus of Steel Corrosion in a Concrete Port

Service Life Evaluation of Marine Concrete Structures Considering Spatial and Temporal Characteristics: A Framework Based on Multi Training-Mcs-nls

Corrosion Prediction Models for Steel Bars in Chloride-Contaminated Concrete: a Review

SIMULATED RESEARCH ON CORROSION OF REINFORCEMENT IN CONCRETE UNDER CHLORIDE ENVIRONMENT

Time-dependent non-uniform corrosion of concrete structures under marine environments considering the vertical variation of exposure conditions

Time-dependent Reliability Computation of Concrete Structures Based on Chloride Ion Penetration

Time-dependent reliability analysis of reinforced concrete beams subjected to bending and marine atmospheric environment

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Long-short-term memory model for quantitative analysis of corrosion products in concrete

Predeterminate Model Of Corrosion Rate Of Steel In Concrete

Revised Model of Chloride Diffusion in Concrete Bridge by Considering Complex Action of Load and Chloride Binding Capacity