Abstract:Abstract Aluminum can enhance heat release of energetic composite in theory. However, the commonly used micron aluminum powder has several short comings like incomplete reaction and low reaction rate. Meanwhile, outer oxide shell of nano Al particle is thicker than micro Al, which leads to low active aluminum content and insufficient heat release. On the basis of previous research, reported fluoropolymers modified Al particles were compared and suitable F2311was chosen. Sub-micron scale Al (median particle size around 200 nm) was regarded as optimum coated object in consideration of activity content of aluminum powder changing with particle size. The super fine Al powder was prepared by electrical explosion method, and encapsulated in situ by selected fluorine rubber F2311. The experiments on thermal stability demonstrated F2311 coating thickness should be no less than 3.6 nm. These results were further confirmed by EXPLO5 thermo dynamic calculation. Calculated results showed that reaction characters of F2311 encapsulated Al exceeded conventional nano Al regardless of combustion and explosion. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser particle size analyzer and X-ray photoelectron spectroscopy (XPS) were used to characterize coated products’ morphology, particle size distribution and interfacial bonding information. The results showed that the coated samples were generally spherical shape, with median particle size of 217.7 nm and coating thickness of 3.6 nm. The coating shell contained a small amount of alumina and aluminum fluoride besides fluoropolymer. The non-isothermal dynamic equations of Al/F2311 and Al/Al 2 O 3 were deduced by TG/DSC simultaneous thermal analysis. Compared with conventional nano-Al, the apparent activation energy of Al/F2311 decreased by 45 kJ/mol and the first exothermic peak temperature was about 10 °C earlier. Moreover, heat release was nearly twice as conventional nano-Al. TG-DSC-MS coupled measurements certified that active Al was enveloped by ‘fluorine atmosphere’ while F2311 decomposed in range of 200–400 °C. Alumina was replaced with aluminum fluoride inside coating layer during 400–550 °C, which broadened the diffusion path and then accelerated the permeation of oxidizing gas. In addition, the exothermic of Al-F was obviously larger than Al-O. Consequently, the oxidation reaction was activated rapidly, especially in initial exothermic period. Fluoropolymer encapsulated sub-micron sized Al was a latent highly activity energetic fuel and a potential candidate for aluminum powder.

Reactive material aluminum/nickel fluoride and its thermal reaction properties

A latent highly activity energetic fuel: thermal stability and interfacial reaction kinetics of selected fluoropolymer encapsulated sub-micron sized Al particles

A novel nano-thermite system with BiOF as fluorine-containing oxidant for enhanced energy release performance

Graphite fluoride as a new oxidizer to construct nano-Al based reactive material and its combustion performance

A Reaction Study for Al–Ni2O3 Nano Self-Exothermic Materials

Synthesis Of Nano-Nickel-Coated Micro-Aluminum And Thermal Reactivity Of Aluminum/Nickel-Stannic-Oxide Thermite

Effects Of Fluorination Temperature On Surface Structure And Electrochemical Properties Of Ab(2) Electrode Alloys

THERMAL REACTIVITY OF AL/FE CORE−SHELL NANOCOMPOSITES

Thermal Data of Perfluorinated Carboxylic Acid Functionalized Aluminum Nanoparticles

Research on the Impact Initiation Behavior of PTFE/Al/Ni2O3 Reactive Materials.

Reactive molecular dynamics simulation of thermal decomposition for nitromethane/nano-aluminum composites

Research on the Initial Reaction Temperatures of Ni/Al Composites

The combustion-supporting mechanism of fluoropolymer on aluminum particles using reactive dynamics simulations

In situ fabrication of α-Al2O3 and Ni2Al3 reinforced aluminum matrix composites in an Al–Ni2O3 system

An approach to the induced reaction mechanism of the combustion of the nano-Al/PVDF composite particles

Review on Al/Ni reactive multilayer foils

Ni/AlN Composite Coating for Corrosion and Elements Interdiffusion Resistance in Molten Fluoride Salts System

Anti-sintering behavior and combustion process of aluminum nano particles coated with PTFE: A molecular dynamics study

Enhancement of the ignition and combustion performance of nano-aluminum: the effect of cryolite

Phase composition, microstructure, and properties of Al4O4C–(Al2OC)1-(AlN) –Zr2Al3C4–Al2O3 refractories prepared at high temperatures in nitrogen

Ignition and Combustion Characteristics of Aluminum-Based Fluorine-Containing Composite Powder