Abstract:Owing to resource limitations, environmental pollution concerns, and the increasing global demand for lithium- ion battery raw materials, the recycling of discarded electrode materials from lithium-ion batteries has emerged as a prominent research area. Nevertheless, among various types of discarded lithium battery electrode materials, limited research has been conducted on the recycling of ternary electrode materials (LiNixCoyMn1-x-yO2). x Co y Mn 1- x- y O 2 ). This study proposes an eco-friendly process for the efficient recovery of valuable metals and carbon from mixed materials of discarded ternary lithium-ion battery electrodes. This study investigated the influence of various roasting using ammonium sulfate and leaching conditions on the conversion and extraction rates of valuable metals. Under the condition of a 3:1 mass ratio of ammonium sulfate to lithium battery electrode mixed material, roasting temperature of 450 degrees C, roasting time of 30 min, liquid-solid ratio of 20:1, leaching time of 20 min, and leaching temperature of 60 degrees C, the recovery rates of various valuable metals including Li, Ni, Co, and Mn reached 99.99%. For the above process, the chemical control reaction prevailed in the initial 10 min of the roasting reaction, succeeded by the dominance of diffusion control reaction in the subsequent 20 min. In the leaching process, the chemical control reaction governed the first 2 min, succeeded by diffusion control reaction for the next 18 min. Analysis of the reaction's macroscopic and microscopic mechanisms reveals that ammonium sulfate roasting of waste ternary lithium-ion batteries constitutes a typical liquid-solid reaction. In the molten state, NH4+ 4 + decomposition releases high-energy H+ + ions that break the bonds between metals and oxygen. Consequently, metal atoms from the waste battery's crystal structure combine with ammonium sulfate's sulfate groups, forming various metal sulfates. This paper establishes an eco-friendly process for the efficient recovery of valuable metals by employing the ammonium sulfate roasting method to convert valuable metals in discarded electrode mixed materials into water-soluble sulfates.

Fast ammonium sulfate salt assisted roasting for selectively recycling degraded LiFePO 4 cathode

Recovery of LiFePO4 from used lithium-ion batteries by sodium-bisulphate-assisted roasting

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

NaOH-assisted low-temperature roasting to recover spent LiFePO4 batteries

Selective lithium extraction of cathode materials from spent lithium-ion batteries via low-valent salt assisted roasting

Direct regeneration of degraded lithium-ion battery cathodes with a multifunctional organic lithium salt

A facile new process for the efficient conversion of spent LiFePO4 batteries via (NH4)2S2O8-assisted mechanochemical activation coupled with water leaching

Sodium sulfite roasting for preferential lithium extraction from cathode material of spent lithium-ion batteries

Molten salt infiltration–oxidation synergistic controlled lithium extraction from spent lithium iron phosphate batteries: an efficient, acid free, and closed-loop strategy

Selective recovery of Li and FePO4 from spent LiFePO4 cathode scraps by organic acids and the properties of the regenerated LiFePO4

Research on the Recycling of Waste Lithium Battery Electrode Materials Using Ammonium Sulfate Roasting

A method for recovering Li3PO4 from spent lithium iron phosphate cathode material through high-temperature activation

Recycling of spent lithium nickel cobalt manganese oxides via a low-temperature ammonium sulfation roasting approach

Recovery and regeneration of LiFePO4 from spent lithium-ion batteries via a novel pretreatment process

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Amino Group‐Aided Efficient Regeneration Targeting Structural Defects and Inactive FePO4 Phase for Degraded LiFePO4 Cathodes

Recovery of lithium iron phosphate batteries through electrochemical oxidation in Na2CO3 solutions

Facile and Sustainable Recovery of Spent LiFePO4 Battery Cathode Materials in a Ca(ClO)2 System

Acid-Free and Selective Extraction of Lithium from Spent Lithium Iron Phosphate Batteries Via a Mechanochemically Induced Isomorphic Substitution

Selective leaching process for efficient and rapid recycling of spent lithium iron phosphate batteries

Ultra-fast Mechanochemistry Reaction Process: an Environmentally Friendly Instant Recycling Method for Spent LiFePO4 Batteries