[What is better: virtual or endoscopic coloscopy? The colonoscope has not become superannuated so fast!].

H. Bartram,M. Burgstaller

2002-02-14

Abstract:

What problem does this paper attempt to address?

Numerical Investigation on the Origin of Virus-Laden Droplets in the Respiratory Tract

Jianjian Wei,Yong Guo,Hao Lei,Lei Wang,Tao Jin,Lingling Tang

DOI: https://doi.org/10.1360/tb-2020-0811

2020-01-01

Abstract:There have been over 17 million COVID-19 infections worldwide up to July 31, 2020, but the exact transmission route remains a subject for debate. Virus load in different-sized respiratory droplets is the key to address the above question. Investigation on the droplet deposition characteristics during exhalation inside the respiratory tract will facilitate the understanding of their origin and importance in transmitting the respiratory infection. Based on a realistic respiratory model, this study utilized the computational fluid dynamic (CFD) simulation to investigate the deposition of droplets originating from infection sites like pharynx, larynx and trachea under three flow conditions, namely 30 L/min (representing the normal breathing condition), 60 L/min (speaking) and 180 L/min (coughing). The SST k-omega turbulence model integrated in ANSYS Fluent software was utilized to obtain the flow field inside the respiratory tract by solving the continuity and momentum equations, and the Lagrangian approach was used to calculate droplet motion and deposition with the discrete random walk model to account for the turbulence fluctuation effect. Evaporation of droplets was not considered inside the saturated respiratory tract. Droplet diameter, flow rate of the exhaling air, and complexity of the respiratory tract geometry are the most important factors in determining the deposition pattern of respiratory droplets. It is revealed that the largest droplet that originates from the joint of pharynx and larynx and is able to escape out of the respiratory tract is about 20 mu m (30 L/min) or 10 mu m (60-180 L/min) in diameter; the so-called cut-off sizes for vocal cord and trachea originated droplets are 7 mu m (30 L/min), 5 mu m (60 L/min) or 3 mu m (180 L/min). Larynx and joint of larynx and pharynx are the most important deposition sites due to their complexity in geometry and the existence of the laryngeal jet, whose velocity is up to 102 m/s during coughing and 32 m/s during speaking; the nasal cavity is also effective in trapping relatively small droplets as the airflow has a sudden change in direction before entering the oral cavity. Under the investigated speaking scenario (60 L/min), the escape rate of 1 mu m droplets is around 50%, and the maximum escape rates of 5 and 10 mu m droplets are respectively 13.1% and 1.3% (originating from the joint of pharynx and larynx). Although large droplets up to several hundred micrometers can be produced inside the oral cavity due to the atomization mechanism, they seldom carry pathogen. Thus, for COVID-19 patents in the early stage of infection who show upper respiratory symptoms, the cut-off size of virus-laden droplets released into the environment is about 20 mu m; with the shifting of infection to the lower respiratory tract in the later stage, the cut-off size decreases to 7 mu m. Respiratory droplets evaporate immediately after escaping into the indoor environments and shrink to about one third of their initial size, so airborne route is speculated to be important in the transmission of COVID-19. Further investigations considering realistic flow conditions together with droplet sampling experiments on human volunteers are necessary to confirm these cut-off sizes.
Modelling airborne transmission of SARS-CoV-2 at a local scale

Simon Rahn,Marion Gödel,Gerta Köster,Gesine Hofinger

DOI: https://doi.org/10.1371/journal.pone.0273820

2022-09-01

Abstract:The coronavirus disease (COVID-19) pandemic has changed our lives and still poses a challenge to science. Numerous studies have contributed to a better understanding of the pandemic. In particular, inhalation of aerosolised pathogens has been identified as essential for transmission. This information is crucial to slow the spread, but the individual likelihood of becoming infected in everyday situations remains uncertain. Mathematical models help estimate such risks. In this study, we propose how to model airborne transmission of SARS-CoV-2 at a local scale. In this regard, we combine microscopic crowd simulation with a new model for disease transmission. Inspired by compartmental models, we describe agents' health status as susceptible, exposed, infectious or recovered. Infectious agents exhale pathogens bound to persistent aerosols, whereas susceptible agents absorb pathogens when moving through an aerosol cloud left by the infectious agent. The transmission depends on the pathogen load of the aerosol cloud, which changes over time. We propose a 'high risk' benchmark scenario to distinguish critical from non-critical situations. Simulating indoor situations show that the new model is suitable to evaluate the risk of exposure qualitatively and, thus, enables scientists or even decision-makers to better assess the spread of COVID-19 and similar diseases.

Populations and Evolution,Multiagent Systems
Numerical simulation on exhaled aerosol transmission based on realistic oral-nasal structures and temperature distribution

Chong Zhu,Hao Xie,Xiaole Chen,Xinye Wang,Junguang Meng,Jiayu Wei,Zhonghui Zhao

DOI: https://doi.org/10.1080/10962247.2024.2416927

2024-10-30

Journal of the Air & Waste Management Association

Abstract:Respiratory infections are currently understood to be caused by pathogens released through the nose or mouth of an infected individual, and subsequently transmitted to susceptible hosts. These pathogens are enclosed in liquid particles that are aerosolized from the respiratory tract during activities such as breathing, speaking, sneezing, and coughing. These particles vary widely in size, ranging from submicron to several microns. While past research has largely overlooked the human respiratory system, recent analysis has revealed that the actual structure of the nasal cavity significantly influences the prediction of aerosol transmission during exhalation. In this study, computational fluid dynamics (CFD) simulations were conducted to analyze the aerosol transmission generated during exhalation from the nasal and oral cavities. Realistic nasal and oral cavity structures were taken into account, and authentic temperature distributions were applied to the surfaces. Additionally, inhalation conditions for susceptible individuals were established to evaluate the risk of inhalation-generated exposure. Through various simulation scenarios, we separately discussed the impact of environmental wind speed, separation distance, and exhalation flow rate. The simulation results indicate that environmental wind amplifies the complexity of the flow field and the transmission and deposition of particles between two individuals. Under ambient wind velocities of 0.5 m/s and 1 m/s, it was observed that over 80% of the particles with a diameter of 1 μm inhaled through the nasal cavity accounted for the total deposition on the infected individual. Furthermore, high exhalation flow rates exhibited higher deposition ratios at close distances, in line with our expectations. Therefore, it is advisable to minimize close contact as much as possible during periods of frequent respiratory infections, and to wear masks in order to reduce the risk of inhalation exposure. Implications : During the activities such as breathing, speaking, sneezing, and coughing, liquid particles containing pathogens are aerosolized from the respiratory tract and are released from nose or mouth through the nebulization. In this study, we investigated the transmission of aerosols from human exhalation in the outdoor environment, innovatively taking the real oral-nasal structure and the active inhalation of vulnerable people into consideration, and explored the human-to-human transmission of respiratory viruses. The results are beneficial for public health assessment and policy development.

environmental sciences,engineering, environmental,meteorology & atmospheric sciences
CFD modeling of the transport of human respiratory droplets in an indoor environment

Oda Martine Sundsdal,A. Chaudhuri,S. Nambully,Ole Martinius Harket Norbeck

DOI: https://doi.org/10.3384/ecp192035

2022-10-28

Abstract:For the last couple of years, the world has faced the global pandemic COVID-19. The viral transmission could occur via different modes like large respiratory droplets, direct contact with contaminated surfaces and airborne microdroplets or aerosol. This work revisits and focuses on human cough, and breathing sequence together with cough in confined spaces. We consider the Eulerian dispersion medium as a multicomponent ideal gas mixture consisting of oxygen, nitrogen and water vapor and the Lagrangian dispersed phase of human cough/breathe is modeled as pure liquid water. The unsteady complex flow is resolved with an advanced three-dimensional multiphase flow solver utilizing adaptive mesh refinement (AMR). A simplified rectangular block with a rectangular mouth area is considered to mimic human beings to inject exhaled gas and liquid droplets associated with cough and or breathing instances. The evaporation model is switched off for the particles of diameter less than 5 μm to resolve the dynamics of the airborne particles. The results clearly demonstrate the efficacy of the novel approach toward gaining more knowledge about viral transmission in indoor environments.

Environmental Science,Engineering,Medicine
Computational and experimental study of aerosol dispersion in a ventilated room

George H. Downing,Yannis Hardalupas,Justice Archer,Henry E. Symons,Ulas Baran Baloglu,Daniel Schien,Bryan R. Bzdek,Jonathan P. Reid

DOI: https://doi.org/10.1080/02786826.2022.2145179

2022-11-22

Aerosol Science and Technology

Abstract:For many respiratory diseases, a primary mode of transmission is inhalation via aerosols and droplets. The COVID-19 pandemic has accelerated studies of aerosol dispersion in indoor environments. Most studies of aerosol dispersion present computational fluid dynamics results, which rarely include detailed experimental verification, and many of the computations are complex, making them hard to scale to larger spaces. This study presents a comparison of computational simulations and measurements of aerosol dispersion within a typical ventilated classroom. Measurements were accomplished using a custom-built low-cost sensor network composed of 15 commercially available optical particle sizers, which provided size-resolved information about the number concentrations and temporal dynamics of 0.3–40 μm diameter particles. Measurement results are compared to the computed dispersal and loss rates from a steady-state Reynolds-Averaged Navier–Stokes k-epsilon model. The results show that a newly developed aerosol-transport-model can accurately simulate the dispersion of aerosols and faithfully predict measured aerosol concentrations at different locations and times. The computational model was developed with scalability in mind such that it may be adapted for larger spaces. The experiments highlight that the fraction of aerosol recycled in the ventilation system depends on the aerosol droplet size and cannot be predicted by the recycled-to-outside air ratio. Moreover, aerosol recirculation is not negligible, as some computational approaches assume. Both modeling and measurements show that, depending on the location within the room, the maximum aerosol concentration can be many times higher than the average concentration, increasing the risk of infection.

environmental sciences,meteorology & atmospheric sciences,engineering, chemical, mechanical
Modeling the load of SARS-CoV-2 virus in human expelled particles during coughing and speaking

Yang Wang,Guang Xu,Yue-Wern Huang

DOI: https://doi.org/10.1371/journal.pone.0241539

IF: 3.7

2020-10-30

PLoS ONE

Abstract:Particle size is an essential factor when considering the fate and transport of virus-containing droplets expelled by human, because it determines the deposition pattern in the human respiratory system and the evolution of droplets by evaporation and gravitational settling. However, the evolution of virus-containing droplets and the size-dependent viral load have not been studied in detail. The lack of this information leads to uncertainties in understanding the airborne transmission of respiratory diseases, such as the COVID-19. In this study, through a set of differential equations describing the evolution of respiratory droplets and by using the SARS-CoV-2 virus as an example, we investigated the distribution of airborne virus in human expelled particles from coughing and speaking. More specifically, by calculating the vertical distances traveled by the respiratory droplets, we examined the number of viruses that can remain airborne and the size of particles carrying these airborne viruses after different elapsed times. From a single cough, a person with a high viral load in respiratory fluid (2.35 × 109 copies per ml) may generate as many as 1.23 × 105 copies of viruses that can remain airborne after 10 seconds, compared to 386 copies of a normal patient (7.00 × 106 copies per ml). Masking, however, can effectively block around 94% of the viruses that may otherwise remain airborne after 10 seconds. Our study found that no clear size boundary exists between particles that can settle and can remain airborne. The results from this study challenge the conventional understanding of disease transmission routes through airborne and droplet mechanisms. We suggest that a complete understanding of the respiratory droplet evolution is essential and needed to identify the transmission mechanisms of respiratory diseases.

multidisciplinary sciences
Airborne and aerosol pathogen transmission modeling of respiratory events in buildings: An overview of computational fluid dynamics

Yahya Sheikhnejad,Reihaneh Aghamolaei,Marzieh Fallahpour,Hamid Motamedi,Mohammad Moshfeghi,Parham A Mirzaei,Hadi Bordbar,Parham A. Mirzaei

DOI: https://doi.org/10.1016/j.scs.2022.103704

IF: 11.7

2022-04-01

Sustainable Cities and Society

Abstract:Pathogen droplets released from respiratory events are the primary means of dispersion and transmission of the recent pandemic of COVID-19. Computational fluid dynamics (CFD) has been widely employed as a fast, reliable, and inexpensive technique to support decision-making and to envisage mitigatory protocols. Nonetheless, the airborne pathogen droplet CFD modeling encounters limitations due to the oversimplification of involved physics and the intensive computational demand. Moreover, uncertainties in the collected clinical data required to simulate airborne and aerosol transport such as droplets' initial velocities, tempo-spatial profiles, release angle, and size distributions are broadly reported in the literature. There is a noticeable inconsistency around these collected data amongst many reported studies. This study aims to review the capabilities and limitations associated with CFD modeling. Setting the CFD models needs experimental data of respiratory flows such as velocity, particle size, and number distribution. Therefore, this paper briefly reviews the experimental techniques used to measure the characteristics of airborne pathogen droplet transmissions together with their limitations and reported uncertainties. The relevant clinical data related to pathogen transmission needed for postprocessing of CFD data and translating them to safety measures are also reviewed. Eventually, the uncertainty and inconsistency of the existing clinical data available for airborne pathogen CFD analysis are scurtinized to pave a pathway toward future studies ensuing these identified gaps and limitations.

energy & fuels,construction & building technology,green & sustainable science & technology
A simple model for the outcomes of collisions between exhaled aerosol droplets and airborne particulate matter: Towards an understanding of the influence of air pollution on airborne viral transmission

Andrew N. Round

DOI: https://doi.org/10.48550/arXiv.2209.08396

2022-09-18

Abstract:A model that predicts the outcome of collisions between droplets and particles in terms of the distribution of the droplet volume post-collision is lacking, in contrast to the case for droplet-droplet interactions. Taking existing models that successfully predict the outcomes (coalescence, stretching or reflexive separation) and post-separation characteristics (sizes, numbers and velocities of the resulting droplets) of droplet-droplet collisions and adapting them to take into account an inextensible, non-deformable particle with varying wettability characteristics, a new model is presented for droplet-particle collisions. The predictions of the new model agree well with experimental observations of droplet-particle collisions in low-viscosity regimes. The model is then applied to the case of collisions between respiratory aerosols generated by breath, speech, cough and sneeze and ambient airborne particulate material (PM) in order to assess the potential contribution of these interactions to the enhanced transmission of pathogens contained in the aerosol, including COVID-19. The results show that under realistic conditions it is possible for aerosol-PM collisions to enrich the pathogen content of smaller (and so more persistent) aerosol fractions, and to transfer pathogens to the surface of PM particles that can travel deep into the respiratory tract. In the context of better knowledge of the size and velocity distributions of respiratory aerosols, this model may be used to predict the extent to which high ambient PM levels may contribute to airborne infection by pathogens such as COVID-19.

Chemical Physics,Fluid Dynamics
Airborne dispersion of droplets during coughing: a physical model of viral transmission

Hongying Li,Fong Yew Leong,George Xu,Chang Wei Kang,Keng Hui Lim,Ban Hock Tan,Chian Min Loo

DOI: https://doi.org/10.1038/s41598-021-84245-2

2020-08-05

Abstract:The Covid-19 pandemic has focused attention on airborne transmission of viruses. Using realistic air flow simulation, we model droplet dispersion from coughing and study the transmission risk related to SARS-CoV-2. Although most airborne droplets are 8-16 $\mu$m in diameter, the droplets with the highest transmission potential are, in fact, 32-40 $\mu$m. Use of face masks is therefore recommended for both personal and social protection. We found social distancing effective at reducing transmission potential across all droplet sizes. However, the presence of a human body 1 m away modifies the aerodynamics so that downstream droplet dispersion is enhanced, which has implications on safe distancing in queues. Based on median viral load, we found that an average of 0.55 viral copies is inhaled at 1 m distance per cough. Droplet evaporation results in significant reduction in droplet counts, but airborne transmission remains possible even under low humidity conditions.

Fluid Dynamics
IVB-4 vertical storage trench gated diode leakage

S. Voldman,A. Bryant,W. Noble

DOI: https://doi.org/10.1109/T-ED.1987.23288

IF: 3.1

1987-11-01

IEEE Transactions on Electron Devices

Abstract:
Modelling of human exhaled sprays and aerosols to enable real-time estimation of spatially-resolved infection risk in indoor environments

Daniel Fredrich,Aliyah M. Akbar,Muhammad Faieq bin Mohd Fadzil,Afxentis Giorgallis,Alexander Kruse,Noah Liniger,Lazaros Papachristodoulou,Andrea Giusti

DOI: https://doi.org/10.48550/arXiv.2212.07787

2022-12-15

Abstract:A numerical framework for the 'real-time' estimation of the infection risk from airborne diseases (e.g., SARS-CoV-2) in indoor spaces such as hospitals, restaurants, cinemas or teaching rooms is proposed. The developed model is based on the use of computational fluid dynamics as a pre-processor to obtain the time-averaged ventilation pattern inside a room, and a post-processing tool for the computation of the dispersion of sprays and aerosols emitted by its occupants in 'real time'. The model can predict the dispersion and concentration of droplets carrying viable viral copies in the air, the contamination of surfaces, and the related spatially-resolved infection risk. It may therefore provide useful information for the management of indoor environments in terms of, e.g., maximum occupancy, air changes per hour and cleaning of surfaces. This work describes the fundamentals of the model and its main characteristics. The model was developed using open-source software and is conceived to be simple, user-friendly and highly automated to enable any potential user to perform estimations of the local infection risk.

Physics and Society,Computational Physics,Fluid Dynamics
CFD modelling of indoor aerosol transport to infer airborne SARS-CoV-2 transmission risk

Abstract:Background Transmission of SARS-CoV-2 occurs predominantly indoors, where airborne transmission is a significant route of infection [1]. While respiratory droplets (> 5 μm) quickly settle to the ground, aerosol particles (< 5 μm) can remain airborne up to hours. Their transport can e.g. be augmented by air-conditioning or result in accumulation of virusladen aerosols in particular regions of a closed air space shared with others. An infectious dose might build up over typical meeting times in distances much larger than 2m away from infected individuals. In such scenarios, not only short-range dynamics and evaporation of droplets are important but also long-range convective transport, turbulent dispersion and long-term local accumulation of virus-laden aerosols in distant areas become a key factor for indirect and airborne transmission of SARS-CoV-2 from person to person. Thus, understanding aerosol transport in indoor environments is indispensable for controlling the ongoing pandemic and to help preventing future ones involving airborne transmission. However, bio-aerosol transport dynamics in indoor environments are notoriously complex and therefore not straightforward to model and assess.

Environmental Science,Engineering,Medicine
Quantitatively Visualizing Airborne Disease Transmission Risks of Different Exhalation Activities Through CO2 Imaging.

Yijiao Peng,Maosheng Yao

DOI: https://doi.org/10.1021/acs.est.2c08503

IF: 11.4

2023-01-01

Environmental Science & Technology

Abstract:Aerosol transmission has played a leading role in COVID-19 pandemic. However, there is still a poor understanding about how it is transmitted. This work was designed to study the exhaled breath flow dynamics and transmission risks under different exhaling modes. Using an infrared photography device, exhaled flow characteristics of different breathing activities, such as deep breathing, dry coughing, and laughing, together with the roles of mouth and nose were characterized by imaging CO2 flow morphologies. Both mouth and nose played an important role in the disease transmission though in the downward direction for the nose. In contrast to the trajectory commonly modeled, the exhaled airflows appeared with turbulent entrainments and obvious irregular movements, particularly the exhalations involving mouth were directed horizontal and had a higher propagation capacity and transmission risk. While the cumulative risk was high for deep breathing, those transient ones from dry coughing, yawning, and laughing were also shown to be significant. Various protective measures including masks, canteen table shields, and wearable devices were visually demonstrated to be effective for altering the exhaled flow directions. This work is useful to understanding the risk of aerosol infection and guiding the formulation of its prevention and control strategies. Experimental data also provide important information for refining model boundary conditions.
[COMT Val158Met polymorphism and schizophrenia in a series of Spanish patients].

Justo Díez-Martín,J. Hoenicka,I. Martínez,M. Aragüés,R. Rodríguez-Jiménez,M. Jiménez‐Arriero,G. Ponce,G. Rubio,T. Palomo

DOI: https://doi.org/10.1157/13097467

Abstract:BACKGROUND AND OBJECTIVE Catecol-O-methyl transferase (COMT) enzyme plays a significant role in the regulation of the dopaminergic system in the prefrontal cortex. Several studies have assessed the association between modifications of the COMT activity and schizophrenia, but without consistent results. COMT gene contains a single nucleotide functional polymorphism which produces the change of a valine for a methionine at position 158. The effect of this aminoacid change is a modification of COMT enzymatic activity: valine-COMT displays a significantly higher capacity of postsynaptic dopamine degradation than methionine-COMT. The objective of this study is to carry out a genetic association study of the functional polymorphism Val158Met in a sample of Spanish schizophrenic patients and healthy controls. PATIENTS AND METHOD This is a case-control study made up of 177 patients and 141 healthy controls. All patients -115 males and 62 females, with ages between 27 and 49 years; mean (standard deviation) of 38 (10.7) years- were being treated in the outpatient Psychiatric Clinic of the Hospital Universitario 12 de Octubre, and fulfilled the DSM-IV (Diagnostic and Statistical Manual of Mental Disorders, 4th edition) criteria for schizophrenia (n = 162) or schizoaffective disorder (n = 15). Control subjects -92 males and 49 females, with ages between 26 and 47 years; mean of 36 (9.4) years- were free from medical and psychiatric disorders. Genotype identification was done by means of human genetic molecular techniques coupled to ADN polymerase chain reaction and single strand conformational polymorphism (SSCP) of the COMT Val158Met polymorphism. RESULTS No statisticaly significant differences were found in the allele frequencies for this polymorphism between patient and control samples. Nevertheless, in genotype analysis and when a model of recessive inheritance (Val/Val vs Val/Met and Met/Met) was assumed, a possible tendency towards statistical significance was observed. Our results do not allow to confirm the possible COMT gene variants contribution to schizophrenia etiopathogenesis, but they offer some evidence which would point to its implication in some patients subgroups. CONCLUSIONS With the results obtained in this study a possible contribution of the COMT gene in schizophrenia etiopathogenesis cannot be ruled out. The issue of the possible effect of the COMT Val158Met polymorphism in schizophrenia would remain to be open and calls for the need to replicate this kind of studies in greater samples that will allow stratificate analysis by patients subgroups.
Modelling aerosol transport and virus exposure with numerical simulations in relation to SARS-CoV-2 transmission by inhalation indoors

Ville Vuorinen,Mia Aarnio,Mikko Alava,Ville Alopaeus,Nina Atanasova,Mikko Auvinen,Nallannan Balasubramanian,Hadi Bordbar,Panu Erästö,Rafael Grande,Nick Hayward,Antti Hellsten,Simo Hostikka,Jyrki Hokkanen,Ossi Kaario,Aku Karvinen,Ilkka Kivistö,Marko Korhonen,Risto Kosonen,Janne Kuusela,Sami Lestinen,Erkki Laurila,Heikki J Nieminen,Petteri Peltonen,Juho Pokki,Antti Puisto,Peter Råback,Henri Salmenjoki,Tarja Sironen,Monika Österberg,Heikki J. Nieminen

DOI: https://doi.org/10.1016/j.ssci.2020.104866

IF: 6.392

2020-10-01

Safety Science

Abstract:We provide research findings on the physics of aerosol and droplet dispersion relevant to the hypothesized aerosol transmission of SARS-CoV-2 during the current pandemic. We utilize physics-based modeling at different levels of complexity, along with previous literature on coronaviruses, to investigate the possibility of airborne transmission. The previous literature, our 0D-3D simulations by various physics-based models, and theoretical calculations, indicate that the typical size range of speech and cough originated droplets (<math>d⩽20μm</math>) allows lingering in the air for <math>O(1h</math>) so that they could be inhaled. Consistent with the previous literature, numerical evidence on the rapid drying process of even large droplets, up to sizes <math>O(100μm)</math>, into droplet nuclei/aerosols is provided. Based on the literature and the public media sources, we provide evidence that the individuals, who have been tested positive on COVID-19, could have been exposed to aerosols/droplet nuclei by inhaling them in significant numbers e.g. <math>O(100)</math>. By 3D scale-resolving computational fluid dynamics (CFD) simulations, we give various examples on the transport and dilution of aerosols (<math>d⩽20μm</math>) over distances <math>O(10m)</math> in generic environments. We study susceptible and infected individuals in generic public places by Monte-Carlo modelling. The developed model takes into account the locally varying aerosol concentration levels which the susceptible accumulate via inhalation. The introduced concept, 'exposure time' to virus containing aerosols is proposed to complement the traditional 'safety distance' thinking. We show that the exposure time to inhale <math>O(100)</math> aerosols could range from <math>O(1s)</math> to <math>O(1min)</math> or even to <math>O(1h)</math> depending on the situation. The Monte-Carlo simulations, along with the theory, provide clear quantitative insight to the exposure time in different public indoor environments.

engineering, industrial,operations research & management science
CFD modeling of airborne pathogen transmission of COVID-19 in confined spaces under different ventilation strategies

Hamid Motamedi,Mohammadreza Shirzadi,Yoshihide Tominaga,Parham A Mirzaei,Parham A. Mirzaei

DOI: https://doi.org/10.1016/j.scs.2021.103397

IF: 11.7

2022-01-01

Sustainable Cities and Society

Abstract:Airborne transmission is an important route of spread of viral diseases (e.g., COVID-19) inside the confined spaces. In this respect, computational fluid dynamics (CFD) emerged as a reliable and fast tool to understand the complex flow patterns in such spaces. Most of the recent studies, nonetheless, focused on the spatial distribution of airborne pathogens to identify the infection probability without considering the exposure time.This research proposes a framework to evaluate the infection probability related to both spatial and temporal parameters. A validated Eulerian-Lagrangian CFD model of exhaled droplets is first developed and then evaluated with an office case study impacted by different ventilation strategies (i.e., cross- (CV), single- (SV), mechanical- (MV) and no-ventilation (NV)). CFD results were analyzed in a bespoke code to calculate the tempo-spatial distribution of accumulated airborne pathogens. Furthermore, two indices of local and general infection risks were used to evaluate the infection probability of the ventilation scenarios.The results suggest that SV has the highest infection probability while SV and NO result in higher dispersions of airborne pathogens inside the room. Eventually, the time history of indices reveals that the efficiency of CV and MV can be poor in certain regions of the room.

energy & fuels,construction & building technology,green & sustainable science & technology
Beyond droplet deposition: Virus transport and deposition modeling in respiratory tract influenced by ambient environment and exhalation activities

Danting Luo,Zhiwen Vincent Luo,Xiaohong Zheng,Hua Qian

DOI: https://doi.org/10.1016/j.buildenv.2024.111406

IF: 7.093

2024-03-15

Building and Environment

Abstract:Quantifying virus deposition in the respiratory tract during exposure to various infected environments is crucial for developing effective indoor environmental interventions against airborne infectious diseases. This study presents a novel approach that combines a physical model for virus-laden droplet evaporation, size-independent viral load concentrations, and computational fluid dynamics simulations inside the respiratory tracts. We quantify the impact of exhalation activities and actual vapor pressure on virus deposition fraction ( DF v ) and droplet deposition fraction ( DF d ) in the respiratory tract by tracking virus-laden droplets from exhalation to inhalation to deposition. Our findings reveal that virus deposition fraction significantly differs from the droplet deposition fraction in the respiratory tract, as the minimum mean absolute percentage error (MAPE) is 0.65. Moreover, the exhalation activities and indoor conditions play a vital role in virus deposition. Considering exhalation activity is necessary for assessing the potential risk of infection in the lung lobes. The deposition fraction and copies of the virus are nearly 2-fold and over 6000-fold higher during patient speaking compared to breathing, respectively. Actual vapor pressure is also vital for the interception of the upper respiratory tract. The DF v decreases from 66.86% to 46.96% as actual vapor pressure changes from low to high. Additionally, our study quantifies the difference in virus deposition fraction between size-dependent and size-independent viral load concentrations, showing the necessity of considering size-dependent viral load concentration. Our findings improve the predictability of infection risks and can refer to the development of effective non-pharmaceutical interventions in indoor environments in the post-pandemic.

engineering, environmental,construction & building technology, civil
Quantifying Exhaled Particles in Healthy Humans During Various Respiratory Activities Under Realistic Conditions

Katharina Schwarz,Nadja Struß,Liudmila Banari,Jens M. Hohlfeld

DOI: https://doi.org/10.1089/jamp.2022.0076

2024-01-30

Journal of Aerosol Medicine and Pulmonary Drug Delivery

Abstract:Background: Quantitatively collecting and characterizing exhaled aerosols is vital for infection risk assessment, but the entire droplet size spectrum has often been neglected. We analyzed particle number and size distribution of healthy participants in various respiratory activities, considering inter-individual variability, and deployed a simplified far-field model to inform on infection risks. Methods: Participants repeated the same respiratory activities on two visits. Particles were collected using an airtight extraction helmet supplied with High Efficiency Particulate Air (HEPA) filtered air. The sampling volume flow was transported to two particle counters covering the small and large particle spectrum. The applied simple mass balance model included respiratory activity, viral load, room size, and air exchange rates. Results: Thirty participants completed the study. The major fraction of the number-based size distribution was 60 μm in all other activities. Aerosol volume flow was lowest in tidal breathing, 10-fold higher in quiet/normal speaking, deep breathing, coughing, and 100-fold higher in loud speaking/singing. Intra-individual reproducibility was high. Between participants, aerosol volume flow varied by two orders of magnitude in droplets 80 μm. Simple model calculations not accounting for potential particle size-dependent differences in viral load and infection-related differences were used to model airborne pathogen concentrations. Conclusions: Quantitative analysis of exhaled aerosols for the entire droplet size spectrum as well as the variability in aerosol emission between individuals provides information that can support infection research. Clinical Trial Registration number: NCT04771585.

respiratory system
Challenges in simulating and modeling the airborne virus transmission: A state-of-the-art review

Farzad Pourfattah,Lian-Ping Wang,Weiwei Deng,Yong-Feng Ma,Liangquan Hu,Bo Yang

DOI: https://doi.org/10.1063/5.0061469

IF: 4.6

2021-10-01

Physics of Fluids

Abstract:Recently, the COVID-19 virus pandemic has led to many studies on the airborne transmission of expiratory droplets. While limited experiments and on-site measurements offer qualitative indication of potential virus spread rates and the level of transmission risk, the quantitative understanding and mechanistic insights also indispensably come from careful theoretical modeling and numerical simulation efforts around which a surge of research papers has emerged. However, due to the highly interdisciplinary nature of the topic, numerical simulations of the airborne spread of expiratory droplets face serious challenges. It is essential to examine the assumptions and simplifications made in the existing modeling and simulations, which will be reviewed carefully here to better advance the fidelity of numerical results when compared to the reality. So far, existing review papers have focused on discussing the simulation results without questioning or comparing the model assumptions. This review paper focuses instead on the details of the model simplifications used in the numerical methods and how to properly incorporate important processes associated with respiratory droplet transmission. Specifically, the critical issues reviewed here include modeling of the respiratory droplet evaporation, droplet size distribution, and time-dependent velocity profile of air exhaled from coughing and sneezing. According to the literature review, another problem in numerical simulations is that the virus decay rate and suspended viable viral dose are often not incorporated; therefore here, empirical relationships for the bioactivity of coronavirus are presented. It is hoped that this paper can assist researchers to significantly improve their model fidelity when simulating respiratory droplet transmission.

mechanics,physics, fluids & plasmas
Impacts of Modelling Simplifications on Predicted Dispersion of Human Expiratory Droplets

Li Liu,Peter Vilhelm Nielsen,Chunwen Xu,Jianjian Wei,Yuguo Li

2016-01-01

Abstract:Person-to-person transmission of droplets and droplet nuclei during expiratory activities constitutes a prerequisite for airborne and droplet-borne infections. This study focuses on the impact of modelling simplifications on one manikin’s exposure to the other’s expiratory droplets via breathing. The exhalation airflows are compared and validated by measurement results of human subjects. The flow field between two manikins are found significantly influenced by their exhalation airflows. Mono-dispersed droplets with an initial diameter of 10 μm are released from one breathe of a manikin. All droplets are found to become droplet nuclei before reaching the other manikin. Though the flow field is not quite influenced by the room macroenvironment, the room air conditions affect the dispersion of droplet nuclei significantly. Direct exposure of expiratory droplet nuclei are found to be overestimated, when simplifying the room air condition into isothermal condition, or neglecting the body plume of the manikin. It will also change the microenvironment completely by simplifying the shape of human grid in to a robot shape. The trajectories of both the exhalation airflows and droplet nuclei are significantly different from a detailed shape of human body and mouth.

[What is better: virtual or endoscopic coloscopy? The colonoscope has not become superannuated so fast!].

Numerical Investigation on the Origin of Virus-Laden Droplets in the Respiratory Tract

Modelling airborne transmission of SARS-CoV-2 at a local scale

Numerical simulation on exhaled aerosol transmission based on realistic oral-nasal structures and temperature distribution

CFD modeling of the transport of human respiratory droplets in an indoor environment

Computational and experimental study of aerosol dispersion in a ventilated room

Modeling the load of SARS-CoV-2 virus in human expelled particles during coughing and speaking

Airborne and aerosol pathogen transmission modeling of respiratory events in buildings: An overview of computational fluid dynamics

A simple model for the outcomes of collisions between exhaled aerosol droplets and airborne particulate matter: Towards an understanding of the influence of air pollution on airborne viral transmission

Airborne dispersion of droplets during coughing: a physical model of viral transmission

IVB-4 vertical storage trench gated diode leakage

Modelling of human exhaled sprays and aerosols to enable real-time estimation of spatially-resolved infection risk in indoor environments

CFD modelling of indoor aerosol transport to infer airborne SARS-CoV-2 transmission risk

Quantitatively Visualizing Airborne Disease Transmission Risks of Different Exhalation Activities Through CO2 Imaging.

[COMT Val158Met polymorphism and schizophrenia in a series of Spanish patients].

Modelling aerosol transport and virus exposure with numerical simulations in relation to SARS-CoV-2 transmission by inhalation indoors

CFD modeling of airborne pathogen transmission of COVID-19 in confined spaces under different ventilation strategies

Beyond droplet deposition: Virus transport and deposition modeling in respiratory tract influenced by ambient environment and exhalation activities

Quantifying Exhaled Particles in Healthy Humans During Various Respiratory Activities Under Realistic Conditions

Challenges in simulating and modeling the airborne virus transmission: A state-of-the-art review

Impacts of Modelling Simplifications on Predicted Dispersion of Human Expiratory Droplets