Abstract:Background: Modern EIT systems require simultaneously operating multiple functions for flexibility, interoperability, and clinical applicability. To implement versatile functions, expandable design and implementation tools are needed. On the other hand, it is necessary to develop an ASIC-based EIT system to maximize its performance. Since the ASIC design is expensive and unchangeable, we can use FPGAs as a prior step to the digital ASIC design and carefully classify which functions should be included in the ASIC. In this paper, we describe the details of the FPGA design adopted in the KHU Mark2.5 EIT system. Methods: We classified all functions of the KHU Mark2.5 EIT system into two categories. One is the control and processing of current injection and voltage measurement. The other includes the collection and management of the multi-channel data with timing controls for internal and external interconnections. We describe the implementation of these functions in two kinds of FPGAs called the impedance measurement module (IMM) FPGA and the intra-network controller FPGA. Results: We present functional and timing simulations of the key functions in the FPGAs. From phantom and animal imaging experiments, we show that multiple functions of the system are successfully implemented in the FPGAs. As examples, we demonstrate fast multi-frequency imaging and ECG-gated imaging. Conclusion: Given an analog design of a parallel EIT system, it is important to optimize its digital design to minimize systematic artifacts and maximize performance. This paper described technical details of the FPGA-based fully parallel EIT system called the KHU Mark2.5 with numerous functions needed for clinical applications. Two kinds of FPGAs described in this paper can be used as a basis for future EIT digital ASIC designs for better application-specific human interface as well as hardware performance.

FPGA-Based Planar Sensor Electrical Impedance Tomography (FPGA-psEIT) System Characterized by Double Feedback Howland Constant- Current Pump and Programmable Front-End Measurement

A FPGA-Based Broadband EIT System for Complex Bioimpedance Measurements -- Design and Performance Estimation

A Wideband Contactless Electrical Impedance Tomography System

Electrical impedance imaging system using FPGAs for flexibility and interoperability

A Flexible Low-Cost, High-Precision, Single Interface Electrical Impedance Tomography System for Breast Cancer Detection Using FPGA

A Digital Phase-Sensitive Detector For Electrical Impedance Tomography

An FPGA-Based Multifrequency EIT System with Reference Signal Measurement

Flexi-EIT: A Flexible and Reconfigurable Active Electrode Electrical Impedance Tomography System

A portable instrument for high-speed brain function imaging: FEITER

Design of a novel digital phantom for EIT system calibration

A 13-Channel 1.53-mW 11.28-mm2 Electrical Impedance Tomography SoC Based on Frequency Division Multiplexing for Lung Physiological Imaging

22.6 A 13-Channel 1.53-mW 11.28-mm<sup>2</sup> Electrical Impedance Tomography SoC Based on Frequency Division Multiplexing with 10× Throughput Reduction

A New Symmetric Semi-Parallel Electrical Impedance Tomography (EIT) System - I: the Design

A 13-Channel 1.53-Mw 11.28-Mm(2) Electrical Impedance Tomography Soc Based On Frequency Division Multiplexing With 10x Throughput Reduction

A Real-Time EIT Imaging System Based on the Split Augmented Lagrangian Shrinkage Algorithm

Electrical impedance spectroscopy (EIS)-based evaluation of biological tissue phantoms to study multifrequency electrical impedance tomography (Mf-EIT) systems

An open-source and easily replicable hardware for Electrical Impedance Tomography

A Multi-Channel Electrical Impedance Measurement System Using DSP

[A Digital System for Bioimpedance and Electrical Impedance Tomography Measurement System]

A low-cost, portable 32-channel EIT system with four rings based on AFE4300 for body composition analysis

FPGA-based Implementation of Prony Demodulation in the Multi-Frequency EIT System