Abstract:For every dynamic problem an ad hoc model can be developed to reproduce the damage levels in materials. This work provides a unified model to capture low to high strain rate and ductile to brittle damage processes in dynamic problems with different dynamic energy densities. First a viscoplastic model for low to high strain rate responses of polycrystalline materials is developed. The established viscoplastic model shows excellent correlation between the simulations and experimental results for a wide range of strain rates while it can be readily calibrated with two set of the experimental results. The pressure and temperature dependent elastic material properties are incorporated to account for the effect of the pressure and temperature variations in dynamic problems. The microscale degradation processes, i.e., microcracking and microvoiding, are then correlated to the macroscale failure modes in which the transition between the ductile to brittle microfracture modes is attributed to stress triaxiality, shielding and blunting effects in microcracking, and rate-sensitivity. Also, as a complementary to previously developed ductile void growth models, a novel fracture mechanics based damage model is developed to describe the microcracking process. While microvoiding models, such as Johnson void model (Johnson, 1981), assume the hydrostatic part of the applied stress dominates the deformation mechanism, the developed microcracking model is suited for the problems with the dominant deviatoric stress. The develop model takes into account the effects of the ductile crack bunting and brittle crack cleavage and also the effect of the formation and propagation of the dislocation trails at the microcrack tip. The microscale damage mechanisms are then correlated to the macrofracture modes within the Continuum Damage Mechanics (CDM) framework. The developed multiscale damage framework shows excellent flexibility to reproduce a wide variety of experimental results. Also the developed damage framework is capable of incorporating the stochastic analyses which can take into account the inherent uncertainties in the dynamic problems.

A CDM Approach of Ductile Damage with Plastic Compressibility

A constitutive model for the mechanical behavior of a 3D C/C composite

Identification and measurement of ductile damage parameters

Isotropic Elasto-Plastic Damage Mechanics

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Continuous Damage Mechanics Model for Ductile Fracture

Ductile damage evolution under triaxial state of stress: theory and experiments

Ductile damage model for metal forming simulations including refined description of void nucleation

Plastic-Damage Model for Cyclic Loading of Concrete Structures

A damage model for ductile metals

An anisotropic ductile damage model based on irreversible thermodynamics

CDPM2: A damage-plasticity approach to modelling the failure of concrete

Experimental techniques for ductile damage characterisation

Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading

A new elastoplastic-damage model with the correction of stress triaxiality and Lode angle

Interaction between ductile damage and texture evolution in finite polycrystalline elastoplasticity

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

From ductile damage to unilateral contact via point-wise implicit discontinuity at the infinitesimal element level

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Continuum Models of Ductile Fracture: A Review