Aerial additive manufacturing with multiple autonomous robots
Ketao Zhang,Pisak Chermprayong,Feng Xiao,Dimos Tzoumanikas,Barrie Dams,Sebastian Kay,Basaran Bahadir Kocer,Alec Burns,Lachlan Orr,Talib Alhinai,Christopher Choi,Durgesh Dattatray Darekar,Wenbin Li,Steven Hirschmann,Valentina Soana,Shamsiah Awang Ngah,Clément Grillot,Sina Sareh,Ashutosh Choubey,Laura Margheri,Vijay M Pawar,Richard J Ball,Chris Williams,Paul Shepherd,Stefan Leutenegger,Robert Stuart-Smith,Mirko Kovac
DOI: https://doi.org/10.1038/s41586-022-04988-4
IF: 64.8
Nature
Abstract:Additive manufacturing methods1-4 using static and mobile robots are being developed for both on-site construction5-8 and off-site prefabrication9,10. Here we introduce a method of additive manufacturing, referred to as aerial additive manufacturing (Aerial-AM), that utilizes a team of aerial robots inspired by natural builders11 such as wasps who use collective building methods12,13. We present a scalable multi-robot three-dimensional (3D) printing and path-planning framework that enables robot tasks and population size to be adapted to variations in print geometry throughout a building mission. The multi-robot manufacturing framework allows for autonomous three-dimensional printing under human supervision, real-time assessment of printed geometry and robot behavioural adaptation. To validate autonomous Aerial-AM based on the framework, we develop BuilDrones for depositing materials during flight and ScanDrones for measuring the print quality, and integrate a generic real-time model-predictive-control scheme with the Aerial-AM robots. In addition, we integrate a dynamically self-aligning delta manipulator with the BuilDrone to further improve the manufacturing accuracy to five millimetres for printing geometry with precise trajectory requirements, and develop four cementitious-polymeric composite mixtures suitable for continuous material deposition. We demonstrate proof-of-concept prints including a cylinder 2.05 metres high consisting of 72 layers of a rapid-curing insulation foam material and a cylinder 0.18 metres high consisting of 28 layers of structural pseudoplastic cementitious material, a light-trail virtual print of a dome-like geometry, and multi-robot simulations. Aerial-AM allows manufacturing in-flight and offers future possibilities for building in unbounded, at-height or hard-to-access locations.