Abstract:Integrated systems are facing complex and changing environments with the wide application of atmospheric LiDAR in civil, aerospace, and military fields. Traditional analysis methods employ optical software to evaluate the optical performance of integrated systems, and cannot comprehensively consider the influence of optical and mechanical coupling on the optical performance of the integrated system, resulting in the unsatisfactory accuracy of the analysis results. Optical–mechanical integration technology provides a promising solution to this problem. A small-field-of-view LiDAR system with high repetition frequency, low energy, and single-photon detection technology was taken as an example in this study, and the Zernike polynomial fitting algorithm was programmed to enable transmission between optical and mechanical data. Optical–mechanical integration technology was employed to obtain the optical parameters of the integrated system under a gravity load in the process of designing the optical–mechanical structure of the integrated system. The experimental validation results revealed that the optical–mechanical integration analysis of the divergence angle of the transmission unit resulted in an error of 2.586%. The focal length of the telescope increased by 89 μm, its field of view was 244 μrad, and the error of the detector target surface spot was 4.196%. The continuous day/night detection results showed that the system could accurately detect the temporal and spatial variations in clouds and aerosols. The inverted optical depths were experimentally compared with those obtained using a solar photometer. The average optical depth was 0.314, as detected using LiDAR, and 0.329, as detected by the sun photometer, with an average detection error of 4.559%. Therefore, optical–mechanical integration analysis can effectively improve the stability of the structure of highly integrated and complex optical systems.

Performance evaluation of ground layer adaptive optics based on layer correction efficiency

Performance Analysis and Optimization of Solar Multi-Conjugate Adaptive Optics Systems

Large Field of View Correction by Using Conjugate Adaptive Optics with Multiple Guide Stars

Ground Layer Adaptive Optics: PSF effects on ELT scales

Correcting the aero-optical aberration of the supersonic mixing layer with adaptive optics: concept validation

Astronomical adaptive optics: a review

Efficient reconstruction method for ground layer adaptive optics with mixed natural and laser guide stars

Assembly and testing of Ground Layer Adaptive Optics (GLAO)for ARIES Telescopes

V(WF)$^2$S: Very Wide Field WaveFront Sensor for GLAO

Ground-layer wavefront reconstruction from multiple natural guide stars

Performance of MEMS-based visible-light adaptive optics at Lick Observatory: Closed- and open-loop control

Laser Tomography Adaptive Optics (LTAO): A performance study

Open loop calibration and closed loop non-perturbative estimation of the lateral errors of an adaptive optics system: examples with GRAVITY+ and CHARA experimental data

Intensity adaptive optics

Absorption Line Shape of a One-Dimensional Bose Gas

Application of Adaptive Optics in Ophthalmology

Optical design of the laser launch telescope via physical optics theorem for Laser Guide Star Facility

Deep Learning Assisted Zonal Adaptive Aberration Correction

Ground-Layer Adaptive Optics for the 2.5m Wide-field and High-resolution Solar Telescope

Improvement of Closed-Loop Wavefront Correction Performance in an Adaptive Optics System

Optical–Mechanical Integration Analysis and Validation of LiDAR Integrated Systems with a Small Field of View and High Repetition Frequency