Abstract:Multi-layer fabrics are commonly used in ballistics shields with a lower bulletproof class to protect against pistol and revolver bullets. In order to additionally limit the dynamic deflection of the samples, layers reinforced with additional materials, including non-Newtonian fluids compacted by shear, are additionally used. Performing a wide range of tests in each case can be very problematic; therefore, there are many calculation methods that allow, with better or worse results, mapping of the behavior of the material in the case of impact loads. The search for simplified methods is very important in order to simplify the complexity of numerical fabric models while maintaining the accuracy of the results obtained. In this article, multi-layer composites were tested. Two samples were included in the elements subjected to shelling. In the first sample, the outer layers consisted of aramid fabrics in a laminate with a thermoplastic polymer matrix. The middle layer contained a non-Newtonian shear-thickening fluid enclosed in hexagonal (honeycomb) cells. The fluid was produced using polypropylene glycol and colloidal silica powder with a diameter of 14 µm in the proportions of 60/40. The backing plate was made using a 12-layer composite made of Twaron® para-aramid fabrics with a DCPD matrix-not yet used in a wide range of ballistics. Then, numerical simulations were carried out in the Abaqus/Explicit dynamic analysis. The Johnson-Cook constitutive strength model was used to describe the behavior of elastic-plastic materials constituting the elements of the projectiles. For the non-Newtonian fluid, a Up-Us EOS was used. The inner layers of the fabric were treated as an orthotropic material. Complete homogenization of the sample layers was carried out, thanks to which each layer was treated as a homogeneous continuum. As a parameter of fracture mechanics for shield components, the strain criterion was used with the smooth particles hydrodynamics method (SPH). Then, the results of simulations were compared with the results of the ballistic test for both samples placed next to each other, which resulted in the formation of a multi-layer composite in one ballistic test subjected to impact loads during firing with a 9 × 19 mm Parabellum FMJ projectile with an initial velocity of 370 ± 10 m/s. The results of numerical tests are very similar to the ballistic tests, which indicates the correct mapping of the process and the correct conduct of layer homogenization. The applied proportions of the components in the non-Newtonian fluid allowed a reduction in the deflection compared to previous studies. Additionally, the proposal to use a DCPD matrix allowed to obtain a much lower deflection value compared to other materials, which is a novelty in the field of production of ballistic shields.

Ballistic behaviour of hybride carbon/basalt fiber reinforced epoxy-hBN composite

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Ballistic impact resistance and flexural performance of natural basalt fiber with carbon and glass fibers in inter‐ply hybrid composites

Ballistic and Charpy impact performance of basalt fiber reinforced polymer composites

The effect of hexagonal boron nitride nanopowders addition on the mechanical behaviors of basalt fabric reinforced composites

An investigation of the ballistic impact behavior of multi-layered armor structure

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Ballistic impact assessment of Aluminium Alloy 7075 T6, Kevlar and basalt fiber reinforced composite laminate with different nano fillers

Experimental Estimation of Energy Absorbed and Impact Strength of Kevlar/Basalt-Epoxy Interwoven Composite Laminate Added with Al2O3 Nanoparticles after High-Velocity Bullet Impact

Investigation of hybridization effect on ballistic performance of multi-layered fiber reinforced composite structures

The impact of boron carbide in soft and hard body armor: A comprehensive evaluation on Kevlar and UHMWPE fabrics

Multi-Layer Fabric Composites Combined with Non-Newtonian Shear Thickening in Ballistic Protection-Hybrid Numerical Methods and Ballistic Tests

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

Ballistic Efficiency of an Individual Epoxy Composite Reinforced with Sisal Fibers in Multilayered Armor

Ballistic Resistance of 2D and 3D Woven Sandwich Composites

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Ballistic performance of monolithic rubber-ceramic composite armor

Flexural strength and ballistic performance of vinyl ester resin/aramid fiber composites toughened by graphene nanosheets

The experimental and numerical analysis of the ballistic resistance of polymer composites

Stacking effects on dynamic mechanical behavior of bilayer hexagonal boron nitride under impact

Thickness effect on ballistic impact behavior of hybrid carbon/Kevlar composites