Abstract:Multi-layer fabrics are commonly used in ballistics shields with a lower bulletproof class to protect against pistol and revolver bullets. In order to additionally limit the dynamic deflection of the samples, layers reinforced with additional materials, including non-Newtonian fluids compacted by shear, are additionally used. Performing a wide range of tests in each case can be very problematic; therefore, there are many calculation methods that allow, with better or worse results, mapping of the behavior of the material in the case of impact loads. The search for simplified methods is very important in order to simplify the complexity of numerical fabric models while maintaining the accuracy of the results obtained. In this article, multi-layer composites were tested. Two samples were included in the elements subjected to shelling. In the first sample, the outer layers consisted of aramid fabrics in a laminate with a thermoplastic polymer matrix. The middle layer contained a non-Newtonian shear-thickening fluid enclosed in hexagonal (honeycomb) cells. The fluid was produced using polypropylene glycol and colloidal silica powder with a diameter of 14 µm in the proportions of 60/40. The backing plate was made using a 12-layer composite made of Twaron® para-aramid fabrics with a DCPD matrix-not yet used in a wide range of ballistics. Then, numerical simulations were carried out in the Abaqus/Explicit dynamic analysis. The Johnson-Cook constitutive strength model was used to describe the behavior of elastic-plastic materials constituting the elements of the projectiles. For the non-Newtonian fluid, a Up-Us EOS was used. The inner layers of the fabric were treated as an orthotropic material. Complete homogenization of the sample layers was carried out, thanks to which each layer was treated as a homogeneous continuum. As a parameter of fracture mechanics for shield components, the strain criterion was used with the smooth particles hydrodynamics method (SPH). Then, the results of simulations were compared with the results of the ballistic test for both samples placed next to each other, which resulted in the formation of a multi-layer composite in one ballistic test subjected to impact loads during firing with a 9 × 19 mm Parabellum FMJ projectile with an initial velocity of 370 ± 10 m/s. The results of numerical tests are very similar to the ballistic tests, which indicates the correct mapping of the process and the correct conduct of layer homogenization. The applied proportions of the components in the non-Newtonian fluid allowed a reduction in the deflection compared to previous studies. Additionally, the proposal to use a DCPD matrix allowed to obtain a much lower deflection value compared to other materials, which is a novelty in the field of production of ballistic shields.

The experimental and numerical analysis of the ballistic resistance of polymer composites

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Experimental and Numerical Analysis of a Car Body Shield Loaded with a Ballistic Impact

Experimental and Numerical Study of Ballistic Resistance of Composites Based on Sandwich Metallic Foams

Multi-Layer Fabric Composites Combined with Non-Newtonian Shear Thickening in Ballistic Protection-Hybrid Numerical Methods and Ballistic Tests

Research on anti-penetration performance of composite armor of steel/composite materials

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Dynamic Tests on Polyurea-Based Hybrid Composites for Ballistic Protection

Numerical and experimental analysis of ballistic performance in hybrid soft armours composed of para-aramid triaxial and biaxial woven fabrics

Numerical modeling and analysis of the ballistic impact response of ceramic/composite targets and the influence of cohesive material parameters

Ballistic Resistance of 2D and 3D Woven Sandwich Composites

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Ballistic performance of monolithic rubber-ceramic composite armor

A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications

An investigation of the ballistic impact behavior of multi-layered armor structure

Numerical and analytical investigation of ballistic performance of composite targets with ceramic-polyurea-metal layers and optimization of the layer thicknesses

Effect of Accelerated Ageing on the Ballistic Resistance of Hybrid Composite Armour with Advanced Ceramics and UHMWPE Fibers

Performance of Ceramic-Composite Armors under Ballistic Impact Loading

Ballistic impact performance of ultra-high molecular weight polyethylene (UHMWPE) composite armour

Assessment of the Impact Resistance of a Composite Material with EN AW-7075 Matrix Reinforced with α-Al2O3 Particles Using a 7.62 × 39 mm Projectile

Ballistic performance of Polycarbonate and Polymethyl methacrylate under normal and inclined dynamic impacts