Abstract:Multi-layer fabrics are commonly used in ballistics shields with a lower bulletproof class to protect against pistol and revolver bullets. In order to additionally limit the dynamic deflection of the samples, layers reinforced with additional materials, including non-Newtonian fluids compacted by shear, are additionally used. Performing a wide range of tests in each case can be very problematic; therefore, there are many calculation methods that allow, with better or worse results, mapping of the behavior of the material in the case of impact loads. The search for simplified methods is very important in order to simplify the complexity of numerical fabric models while maintaining the accuracy of the results obtained. In this article, multi-layer composites were tested. Two samples were included in the elements subjected to shelling. In the first sample, the outer layers consisted of aramid fabrics in a laminate with a thermoplastic polymer matrix. The middle layer contained a non-Newtonian shear-thickening fluid enclosed in hexagonal (honeycomb) cells. The fluid was produced using polypropylene glycol and colloidal silica powder with a diameter of 14 µm in the proportions of 60/40. The backing plate was made using a 12-layer composite made of Twaron® para-aramid fabrics with a DCPD matrix-not yet used in a wide range of ballistics. Then, numerical simulations were carried out in the Abaqus/Explicit dynamic analysis. The Johnson-Cook constitutive strength model was used to describe the behavior of elastic-plastic materials constituting the elements of the projectiles. For the non-Newtonian fluid, a Up-Us EOS was used. The inner layers of the fabric were treated as an orthotropic material. Complete homogenization of the sample layers was carried out, thanks to which each layer was treated as a homogeneous continuum. As a parameter of fracture mechanics for shield components, the strain criterion was used with the smooth particles hydrodynamics method (SPH). Then, the results of simulations were compared with the results of the ballistic test for both samples placed next to each other, which resulted in the formation of a multi-layer composite in one ballistic test subjected to impact loads during firing with a 9 × 19 mm Parabellum FMJ projectile with an initial velocity of 370 ± 10 m/s. The results of numerical tests are very similar to the ballistic tests, which indicates the correct mapping of the process and the correct conduct of layer homogenization. The applied proportions of the components in the non-Newtonian fluid allowed a reduction in the deflection compared to previous studies. Additionally, the proposal to use a DCPD matrix allowed to obtain a much lower deflection value compared to other materials, which is a novelty in the field of production of ballistic shields.

Effect of Accelerated Ageing on the Ballistic Resistance of Hybrid Composite Armour with Advanced Ceramics and UHMWPE Fibers

Research on structural design and anti-penetration performance of ceramic composite armor

Research on anti-penetration performance of composite armor of steel/composite materials

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

The experimental and numerical analysis of the ballistic resistance of polymer composites

Experimental and Numerical Study of Ballistic Resistance of Composites Based on Sandwich Metallic Foams

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

Effect of hybrid strategies on the ballistic response of aramid/ultra-high molecular weight polyethylene woven fabrics

Anti-Ballistic Performance of PPTA/UHMWPE Laminates

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Effect of thermal aging on microstructures of aramid composites

Dynamic Tests on Polyurea-Based Hybrid Composites for Ballistic Protection

Ballistic impact performance of ultra-high molecular weight polyethylene (UHMWPE) composite armour

Experimental investigation on the ballistic performance of B 4 C/Aramid/UHMWPE composite armors against API projectile under different temperatures

Numerical and experimental analysis of ballistic performance in hybrid soft armours composed of para-aramid triaxial and biaxial woven fabrics

Design of an add-on ceramic composite armour against 14.5x114 mm API/B32 projectile for the armoured vehicles and investigation of the ballistic performance of the armour

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Selective Laser Melted M300 Maraging Steel-Material Behaviour during Ballistic Testing

Multi-Layer Fabric Composites Combined with Non-Newtonian Shear Thickening in Ballistic Protection-Hybrid Numerical Methods and Ballistic Tests

PA-12-Zirconia-Alumina-Cenospheres 3D Printed Composites: Accelerated Ageing and Role of the Sterilisation Process for Physicochemical Properties

Anti-Penetration Performance of Composite Structures with Metal-Packaged Ceramic Interlayer and UHMWPE Laminate