A comparison ofl-asparaginase fromErwinia aroideae and fromEscherichia coli: Biochemical and biological properties

J. Staerk,O. Zwisler,H. Ronneberger

DOI: https://doi.org/10.1007/BF02138126

1971-03-15

Experientia

Abstract:

What problem does this paper attempt to address?

Practice Prize Paper - Incorporating Emotions into Evaluation and Choice Models: Application to Kmart Australia

K. Roberts,John H. Roberts,P. Danaher,Rohan Raghavan

DOI: https://doi.org/10.1287/mksc.2015.0954

2015-10-14

Abstract:This paper addresses the repositioning of Kmart Australia in 2011. It shows how by calibrating emotional as well as cognitive reactions and estimating their impact on purchase intentions, Kmart was able to focus its communications, improving market share. We measure nine key emotions, ranging from surprise to anger. Including these emotions significantly improves our model for likelihood to choose a store. Measuring emotions enabled Kmart’s advertising agency to create a television commercial that tapped into the specific emotions that most strongly predict the likelihood to choose a store; that is, the model drove the development of the advertising creative. The resulting television commercial tested well and was effective when launched. At the individual level, cognitions and emotions changed dramatically. At the aggregate level, an econometric model showed that store visits were significantly enhanced. Kmart’s EBIT (earnings before interest and tax) increased by 30%, whereas Kmart’s main rival had almost no EBIT growth, despite vigorous attempts to counter Kmart’s campaign. One of our key contributions is to incorporate emotions into marketing science models of evaluation and purchase intentions. We also provide a new methodology to measure emotions. The approach enables marketing science to participate in the design of marketing stimuli, rather than just testing preexisting ones.Data, as supplemental material, are available at http://dx.doi.org/10.1287/mksc.2015.0954 .
Serotype-specific detection of dengue viruses in a nonstructural protein 1-based enzyme-linked immunosorbent assay validated with a multi-national cohort

Irene Bosch,Ankita Reddy,Helena de Puig,Juan E. Ludert,Federico Perdomo-Celis,Carlos F. Narváez,Alice Versiani,Diana Fandos,Mauricio L. Nogueira,Mohit Singla,Rakesh Lodha,Guruprasad R. Medigeshi,Ivette Lorenzana,Hugo Vicente Ralde,Margarita Gélvez-Ramírez,Luis A. Villar,Megan Hiley,Laura Mendoza,Nol Salcedo,Bobby Brooke Herrera,Lee Gehrke

DOI: https://doi.org/10.1371/journal.pntd.0008203

2020-06-24

PLoS Neglected Tropical Diseases

Abstract:Dengue virus (DENV) infections pose one of the largest global barriers to human health. The four serotypes (DENV 1–4) present different symptoms and influence immune response to subsequent DENV infections, rendering surveillance, risk assessments, and disease control particularly challenging. Early diagnosis and appropriate clinical management is critical and can be achieved by detecting DENV nonstructural protein 1 (NS1) in serum during the acute phase. However, few NS1-based tests have been developed that are capable of differentiating DENV serotypes and none are currently commercially available.We developed an enzyme-linked immunosorbent assay (ELISA) to distinguish DENV-1-4 NS1 using serotype-specific pairs of monoclonal antibodies. A total of 1,046 antibodies were harvested from DENV-immunized mice and screened for antigen binding affinity. ELISA clinical performance was evaluated using 408 polymerase chain reaction-confirmed dengue samples obtained from patients in Brazil, Honduras, and India. The overall sensitivity of the test for pan-DENV was 79.66% (325/408), and the sensitivities for DENV-1-4 serotyping were 79.1% (38/48), 80.41% (78/97), 100% (45/45), and 79.6% (98/123), respectively. Specificity reached 94.07–100%.Our study demonstrates a robust antibody screening strategy that enabled the development of a serotype NS1-based ELISA with maximized specific and sensitive antigen binding. This sensitive and specific assay also utilized the most expansive cohort to date, and of which about half are from Latin America, a geographic region severely underrepresented in previous similar studies. This ELISA test offers potential enhanced diagnostics during the acute phase of infection to help guide patient care and disease control. These results indicate that this ELISA is a promising aid in early DENV-1-4 diagnosis and surveillance in regions of endemicity in addition to offer convenient monitoring for future vaccine interventions.Dengue virus (DENV) infection is an increasingly significant threat to global health, with a yearly estimate of 390 million infections and an expected increasing burden with the rise of climate change and globalization. DENV is caused by one of the four serotypes (DENV-1-4), each of which have been associated with different immune responses and clinical manifestations. We developed a method to detect DENV serotypes by targeting the nonstructural 1 (NS1) antigen through an enzyme-linked immunosorbent-based assay with high sensitivity and specificity. We demonstrate that our high throughput mouse-derived antibody screening method selected for optimal test performance. The antibodies were integrated into an ELISA assay that can distinguish between the four different dengue serotypes by serotype-specific pairing. In addition, we provide a dengue universal antibody combination that enables pan-virus detection independently of the serotype. We use the ELISA in three different countries and calculate overall and site-specific sensitivities and specificities. The assay performs optimally when levels of viremia are high during the first five days of fever.

tropical medicine,parasitology
Design and Assessment of a Surface Plasmon Resonance Biosensor for Recognition of Dengue Infected Plasma, Platelets, and Hemoglobin Cells

Yousif S. Adam,Trupti Kamani,Shobhit K. Patel,Ammar Armghan,Abdulkarem H. M. Almawgani,Hussein S. Gumaih

DOI: https://doi.org/10.1007/s11468-024-02639-0

IF: 2.726

2024-11-13

Plasmonics

Abstract:Dengue infection is a viral illness that influences hundreds of thousands of individuals everywhere. Dengue diagnostics are typically not conducted due to their upmost prices, difficult procedures, and lengthy turnaround times. Particular assessments require rapid, trustworthy, and straightforward methodologies for general usage. The rapid diagnosis of dengue fever can prevent sickness from spreading, save lives, and minimize expenses. Controlling and detecting this virus is a significant global public health concern. To address this issue, we designed novel Four-square edge angle–shaped biosensors with computer modeling that can diagnose blood cells infected with dengue virus. Dengue virus can be diagnosed by analyzing the infected cells of plasma, platelets, and hemoglobin cells (HGB) of the blood. The upmost sensitivity (S) achieved for dengue diagnosis is 1090.90 nm/RIU for the blood platelet cells. The upmost valuate of quality factor (QF) is 2206.94, the figure of merit (FOM) is 969.29, and the detection limit is 0.00068. This developed biosensor is probable to diagnose dengue infected blood cells.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
A facile microfluidic chip design for DNA detection using dengue serotypes as a proof-of-concept case study

Y H Foo,Norhidayah Abu,Rafidah Hanim Shueb,Tuan Nur Akmalina Mat Jusoh,Zuhana Ahmad Zubir,Nur Ellina Azmi,Hamidah Sidek,Leon C Z Chan

DOI: https://doi.org/10.1016/j.biotno.2023.11.001

2023-11-09

Abstract:Dengue fever is caused by any of the four serotypes of dengue viruses, DENV-1, DENV-2, DENV-3 and DENV-4 spread by mosquito bites and is important to distinguish between them due to lack of cross-protective neutralizing antibodies for each serotype. Secondary infections also put individuals at higher risk for severe dengue illness than those who have not been previously infected. Current preferred assays include reverse transcription-PCR (RT-PCR) and ELISA. To enable on-field diagnosis of dengue serotypes, the detection process would need to be simplified or at least semi-automated. A downstream detection module was conceptualized and fabricated to detect the amplified DNA from the provided PCR mix (product) of previously developed modular microfluidic chips involving sample loading, cell lysis, RNA extraction and RT-PCR. Further, to ensure accuracy, each serotype assay necessitates a positive control, negative control and test sample, which constitutes 3 separate channels for the diagnosis of just 1 serotype. In this study, a 6-channel bi-assay microfluidic chip was designed with pre-loaded diluent and cyanine dye, sample chamber for loading, sequential fluidic sample mixing, and integrated membranes for simultaneous (6-channel) fluidic manipulation from a single actuation source. Positive samples will turn the dye from blue to violet while the negative controls will remain blue. The integrated membranes provided color contrast and facilitated the manipulation of the samples to the same line of sight for simultaneous analysis, paving the way for automated color analysis via smartphone.
Enhancement of Convection and Molecular Transport into Film Stacked Structures by Introduction of Notch Shape for Micro-Immunoassay

Daiki Arai,Satoshi Ogata,Tetsuhide Shimizu,Ming Yang

DOI: https://doi.org/10.3390/mi15050613

IF: 3.4

2024-05-01

Micromachines

Abstract:A 3D-stack microfluidic device that can be used in combination with 96-well plates for micro-immunoassay was developed by the authors. ELISA for detecting IgA by the 3D-stack can be performed in one-ninth of the time of the conventional method by using only 96-well plates. In this study, a notched-shape film was designed and utilized for the 3D-stack to promote circulation by enhancing and utilizing the axial flow and circumferential flow in order to further reduce the reaction time. A finite element analysis was performed to evaluate the axial flow and circumferential flow while using the 3D-stack in a well and design the optimal shape. The 3D-stack with the notched-shape film was fabricated and utilized for the binding rate test of the antibody and antigen and ELISA. As a result, by promoting circulation using 3D-stack with notched-shape film, the reaction time for each process of ELISA was reduced to 1 min, which is 1/60 for 96 wells at low concentrations.

nanoscience & nanotechnology,instruments & instrumentation,physics, applied,chemistry, analytical
Sliding-strip microfluidic device enables ELISA on paper

Mohit S. Verma,Maria-Nefeli Tsaloglou,Tyler Sisley,Dionysios Christodouleas,Austin Chen,Jonathan Milette,George M. Whitesides

DOI: https://doi.org/10.1016/j.bios.2017.07.034

IF: 12.545

2018-01-01

Biosensors and Bioelectronics

Abstract:This article describes a 3D microfluidic paper-based analytical device that can be used to conduct an enzyme-linked immunosorbent assay (ELISA). The device comprises two parts: a sliding strip (which contains the active sensing area) and a structure surrounding the sliding strip (which holds stored reagents-buffers, antibodies, and enzymatic substrate-and distributes fluid). Running an ELISA involves adding sample (e.g. blood) and water, moving the sliding strip at scheduled times, and analyzing the resulting color in the sensing area visually or using a flatbed scanner. We demonstrate that this device can be used to detect C-reactive protein (CRP)-a biomarker for neonatal sepsis, pelvic inflammatory disease, and inflammatory bowel diseases-at a concentration range of 1-100ng/mL in 1000-fold diluted blood (1-100µg/mL in undiluted blood). The accuracy of the device (as characterized by the area under the receiver operator characteristics curve) is 89% and 83% for cut-offs of 10ng/mL (for neonatal sepsis and pelvic inflammatory disease) and 30ng/mL (for inflammatory bowel diseases) CRP in 1000-fold diluted blood respectively. In resource-limited settings, the device can be used as a part of a kit (containing the device, a fixed-volume capillary, a pre-filled tube, a syringe, and a dropper); this kit would cost ~ $0.50 when produced in large scale (>100,000 devices/week). This kit has the technical characteristics to be employed as a pre-screening tool, when combined with other data such as patient history and clinical signs.

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
Portable Paper-Based Immunoassay Combined with Smartphone Application for Colorimetric and Quantitative Detection of Dengue NS1 Antigen

Muhammad Hatta Prabowo,Thanit Chalermwatanachai,Werasak Surareungchai,Patsamon Rijiravanich

DOI: https://doi.org/10.3791/66130

2024-01-26

Abstract:Dengue virus (DENV) infection, which is transmitted by Aedes mosquitoes, is a major public health concern in tropical and subtropical countries. With an annual incidence of approximately 10 million cases and 20,000-25,000 deaths, particularly among children, there is an urgent need for practical diagnostic tools. The presence of dengue non-structural protein 1 (NS1) during early infection has been linked to cytokine release, vascular leakage, and endothelial dysfunction, making it a potential marker for severe dengue. Paper-based immunoassays such as lateral flow assays (LFAs) and microfluidic paper-based analytical devices (PADs) have gained popularity as diagnostic tests due to their simplicity, rapidity, inexpensiveness, specificity, and ease of interpretation. However, conventional paper-based immunoassays for dengue NS1 detection typically rely on visual inspection, yielding only qualitative results. To address this limitation and enhance sensitivity, we proposed a highly portable NS1 dengue detection assay on a Paper-based Analytical Device (PAD), namely, DEN-NS1-PAD, that integrates a smartphone application as a colorimetric and quantitative reader. The development system enables direct quantification of NS1 concentrations in clinical samples. Serum and blood samples obtained from patients were utilized to demonstrate the system prototype performance. The results were obtained immediately and can be employed for clinical assessment, both in well-equipped healthcare facilities and resource-limited settings. This innovative combination of a paper-based immunoassay with a smartphone application offers a promising approach for enhanced detection and quantification of dengue NS1 antigen. By augmenting sensitivity beyond the capabilities of the naked eye, this system holds great potential for improving clinical decision-making in dengue management, particularly in remote or underserved areas.
Site-specific imprinting of dengue virus non-structural 1 antigen on a polydopamine-based sensing film for early detection and prognosis of dengue

Hui Jean Lim,Tridib Saha,Chien Wei Ooi

DOI: https://doi.org/10.1016/j.talanta.2023.125376

IF: 6.1

2024-02-01

Talanta

Abstract:Serum levels of dengue virus (DENV) non-structural 1 (NS1) antigen can serve as a valuable prognostic indicator of severe dengue infections. A quartz crystal microbalance (QCM)-based biosensor with a biomimetic recognition element was designed to quantitatively detect DENV NS1 as an early disease biomarker. To mitigate the reliance on costly viral antigens during the molecular imprinting process, a synthetic peptide mimicking a DENV NS1 epitope was used as a surrogate template for the synthesis of an epitope-imprinted polydopamine (EMIPDA) sensing film on the biosensor surface. The maximal frequency shift for DENV NS1 was obtained with an EMIPDA film synthesised using 5 mg mL-1 of dopamine monomer and 0.5 mg mL-1 of peptide template. The EMIPDA-QCM biosensor achieved low detection and quantitation limits of 0.091 μg mL-1 and 0.436 μg mL-1, respectively, allowing acute-phase detection of dengue and prognosis of the disease progression. The EMIPDA-QCM biosensor exhibited remarkable selectivity with up to 68-fold larger frequency responses towards DENV NS1 compared to a major serum protein. The site-specific imprinting approach not only enhanced the biosensing performance but also enabled a 26-fold cost reduction for biosensor functionalisation, providing a cost-effective strategy for label-free biosensing of the dengue biomarker via the biopolymer film.

chemistry, analytical
Highly sensitive detection of dengue biomarker using streptavidin-conjugated quantum dots

Linh Tran,Sangkwon Park

DOI: https://doi.org/10.1038/s41598-021-94172-x

IF: 4.6

2021-07-26

Scientific Reports

Abstract:Abstract A highly sensitive immunosensor using streptavidin-conjugated quantum dots (QDs/SA) was developed to detect dengue biomarker of non-structural protein 1 (NS1) at very low concentration, so that it can probe dengue infection even in the early stage. The QDs/SA were first bound to biotinylated NS1 antibody (Ab) and the QDs/SA-Ab conjugates were then used to detect the NS1 antigen (Ag) in the Ag concentration range of 1 pM to 120 nM. The formation of QDs/SA-Ab and QDs/SA-Ab-Ag conjugates was confirmed by the measurements of field emission scanning electron microscopy (FF-SEM), field emission transmission electron microscopy (FE-TEM), dynamic light scattering (DLS), and zeta-potential. Fluorescence emission spectra of QDs/SA-Ab-Ag conjugates showed that the magnitude of fluorescence quenching was linearly proportional to the NS1 Ag concentration and it nicely followed the Stern–Volmer (SV) equation in phosphate buffer solution. However, in human plasma serum solution, the fluorescence quenching behavior was negatively deviated from the SV equation presumably due to interference by the serum component biomolecules, and it was well explained by the Lehrer equation. These results suggest that the current approach is promising because it is highly sensitive, fast, simple, and convenient, and thus it has a potential of application for point-of-care.

multidisciplinary sciences
General formulation of pressure and stress tensor for arbitrary many-body interaction potentials under periodic boundary conditions.

A. Thompson,S. Plimpton,W. Mattson

DOI: https://doi.org/10.1063/1.3245303

2009-10-19

Abstract:Three distinct forms are derived for the force virial contribution to the pressure and stress tensor of a collection of atoms interacting under periodic boundary conditions. All three forms are written in terms of forces acting on atoms, and so are valid for arbitrary many-body interatomic potentials. All three forms are mathematically equivalent. In the special case of atoms interacting with pair potentials, they reduce to previously published forms. (i) The atom-cell form is similar to the standard expression for the virial for a finite nonperiodic system, but with an explicit correction for interactions with periodic images. (ii) The atom form is particularly suited to implementation in modern molecular dynamics simulation codes using spatial decomposition parallel algorithms. (iii) The group form of the virial allows the contributions to the virial to be assigned to individual atoms.
Synthesis of Isolated DNA Aptamer and Its Application of AC-Electrothermal Flow-Based Rapid Biosensor for the Detection of Dengue Virus in a Spiked Sample

Hanbin Park,Hoseok Lee,Myoungro Lee,Changyoon Baek,Jeong Ah Park,Moonbong Jang,Yein Kwon,Junhong Min,Taek Lee

DOI: https://doi.org/10.1021/acs.bioconjchem.3c00249

2023-08-16

Abstract:Dengue fever is an infectious disease caused by the dengue virus (DENV) and is transmitted by mosquitoes in tropical and subtropical regions. The early detection method at a low cost is essential. To address this, we synthesized the isolated DENV aptamer for fabricating a rapid electrochemical biosensor on a Au interdigitated microgap electrode (AuIMGE). The DENV aptamers were generated using the SELEX (systemic evolution of ligands by exponential enrichment) method for binding to DENV surface envelope proteins. To reduce the manufacturing cost, unnecessary nucleotide sequences were excluded from the isolation process of the DENV aptamer. To reduce the detection time, the alternating current electrothermal flow (ACEF) technique was applied to the fabricated biosensor, which can shorten the detection time to 10 min. The performance of the biosensor was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In the diluted DENV protein solution, the linear range of the concentrations was from 1 pM to 1 μM and the LOD was 76.7 fM. Moreover, the proposed biosensor detected DENV in a diluted spiked sample at a linear range of 10-6 to 106 TCID50/mL, while the detection performance was proven with an LOD of 1.74 × 10-7 TCID50/mL along with high selectivity.
Development of a highly sensitive magneto-enzyme lateral flow immunoassay for dengue NS1 detection

Tien V Tran,Ba V Nguyen,Thao T P Nguyen,Tung T Tran,Khanh G Pham,Quang B Le,Binh N Do,Hung N Pham,Chuyen V Nguyen,Duong P H Dinh,Van T Ha,Trang H T Doan,Hoa Q Le,Tien V. Tran,Ba V. Nguyen,Thao T.P. Nguyen,Tung T. Tran,Khanh G. Pham,Quang B. Le,Binh N. Do,Hung N. Pham,Chuyen V. Nguyen,Duong P.H. Dinh,Van T. Ha,Trang H.T. Doan,Hoa Q. Le

DOI: https://doi.org/10.7717/peerj.7779

IF: 3.061

2019-09-25

PeerJ

Abstract:Background Dengue infection represents a global health issue of growing importance. Dengue non-structural protein 1 (NS1) plays a central role in the early detection of the disease. The most common method for NS1 detection is testing by lateral flow immunoassays (LFIAs) with varying sensitivity. In this study, we present a highly sensitive magneto-enzyme LFIA for prompt diagnosis of dengue. Methods We have demonstrated the development of a magneto-enzyme LFIA combining super-paramagnetic nanoparticles as labels and Biotin–Streptavidin signal amplification strategy to detect dengue NS1. Factors affecting the test performance including antibody pair, super-paramagnetic nanoparticle size, nitrocellulose membrane type, amounts of detection and capture antibodies, and amounts of Streptavidin-polyHRP were optimized. Analytical sensitivity and cross-reactivity were determined. Clinical performance of the novel assay was evaluated using a panel of 120 clinical sera. Results This newly developed assay could detect NS1 of all four serotypes of dengue virus (DENV). The limit of detection (LOD) was found to be as low as 0.25 ng ml −1 for DENV-1 and DENV-3, 0.1 ng ml −1 for DENV-2, and 1.0 ng ml −1 for DENV-4. The LOD for DENV-2 was a 50-fold improvement over the best values previously reported. There was an absence of cross-reactivity with Zika NS1, Hepatitis B virus, Hepatitis C virus, and Japanese encephalitis virus. The sensitivity and specificity of the novel assay were 100% when tested on clinical samples. Conclusions We have successfully developed a magneto-enzyme LFIA, allowing rapid and highly sensitive detection of dengue NS1, which is essential for proper management of patients infected with DENV.

multidisciplinary sciences
A Sandwich Electrochemical Immunosensor Based on Antibody Functionalized-Silver Nanoparticles (Ab-Ag NPs) for the Detection of Dengue Biomarker Protein NS1

Maryam Awan,Sajid Rauf,Azhar Abbas,Mian Hasnain Nawaz,Changping Yang,Shakir Ahmad Shahid,Naima Amin,Akhtar Hayat

DOI: https://doi.org/10.1016/j.molliq.2020.114014

IF: 6

2020-01-01

Journal of Molecular Liquids

Abstract:Dengue, a viral disease caused by a flavivirus belonging to family. Flaviviridae, is a serious threat to human health in tropical and subtropical regions worldwide. Herein, we design a sandwich-type immunosensor based on a nano-probe maintaining antibody functionalized-silver-nanoparticles (Ab-Ag NPs) as a trace tag for simple, sensitive, and selective detection of dengue biomarker NS1. Diazonium assisted immobilization of antibody on graphite pencil electrodes provided a selective and specific platform for analyte (NS1) recognition, sandwiched by Ab-Ag NPs. Well defined and sharp electrochemical signals by Ag NPs, characteristics of their oxidation, probed the specific detection of NS1. A proportional increase in the faradic current for the oxidation of Ag NPs is observed with an increase in analyte NS1 concentration. This sandwiched based immunosensor facilitated to achieve a linear range of 3-300 ng/mL with a detection limit of 0.5 ng/mL for NS1 detection. The studies evaluating possible interference with analog analytes are carried to demonstrate the specificity of the designed immunosensor. The applicability of the method is also evaluated to monitor NS1 in spiked human serum samples analysis. The designed sandwich-type immunosensor strategy integrating nano trace tag may find wide-spread clinical applications for early and rapid detection of biomarkers. (C) 2020 Elsevier B.V. All rights reserved.
Development of a rapid assay system for detecting antibody-dependent enhancement of dengue virus infection

Atsushi Yamanaka,Pimploy Rattanaamnuaychai,Mami Matsuda,Ryosuke Suzuki,Jun Shimizu,Tatsuo Shioda,Kazuo Miyazaki

DOI: https://doi.org/10.1016/j.jviromet.2022.114641

Abstract:Antibody-dependent enhancement (ADE) is one of the pathogenic mechanisms related to disease severity in dengue virus infection. Conventional assays for detecting ADE activity usually require several days. In this study, we established a rapid assay system to evaluate ADE activity in dengue-seropositive samples using single round infectious particles (SRIPs). Human Fc-gamma receptor-bearing cells (K562 and Mylc cells) were infected with SRIP antigen in the presence of human serum samples to measure ADE activity. Two assay protocols were introduced: (i) rapid assay with 5 h of incubation, and (ii) semi-rapid assay with 24 h of incubation. The rapid assay requires a large quantity of SRIP antigen and gives results in half a day. Although the semi-rapid assay requires slightly more than a day, it can be performed using only a small amount of SRIP. Interestingly, the range of the number of Mylc cells required for the semi-rapid assay was wider than that of K562 cells. Significant correlations were observed between the rapid and semi-rapid assays for both cell types. Although it is difficult to judge which protocol best reflects the current immune status in vivo, both assays could rapidly provide valuable information regarding the risk assessment for severe diseases.
Instability of (+/-)-7 beta,8 alpha-dihydroxy-9 beta,10 beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (syn-BaPDE)-DNA adducts formed in benzo[a]pyrene-treated Wistar rat embryo cell cultures.

D. Pruess-Schwartz,R. Mauthe,W. Baird

Carcinogenesis

Abstract:One of the peaks present in HPLC profiles of [3H]benzo[a]-pyrene (BaP)-deoxyribonucleosides prepared by enzymatic degradation of [3H]BaP-DNA isolated from Wistar rat embryo cell cultures exposed to [G-3H]BaP was found to be r-7,c-9,c-10,t-8-tetrahydroxy-7,8,9,10-tetrahydroBaP, a BaP-DNA adduct decomposition product (Pruess-Schwartz, D. and Baird, W.M., Cancer Res., 46, 545-552, 1986). To investigate the stability of the hydrocarbon-deoxyribonucleoside linkages in intact BaP-modified DNA, DNA was isolated from Wistar rat embryo cells that had been exposed to [G-3H]BaP and incubated in darkness at 37 degrees C at a range of pH values from 5 to 11 for 72 h or for 1-150 h at pH 7. The rate of breakdown of [3H]BaP-DNA adducts (0.25%/h) was linear over 150 h. The amounts of the two major BaP-DNA adduct decomposition products, I and II (present in a ratio of 1:3), increased with length of time of incubation. Formation of I was not affected by pH, whereas, formation of II was highest at acidic and neutral pH. Analysis of the decomposition products by immobilized boronate chromatography and reverse-phase HPLC demonstrated that both I and II contained cis-vicinal hydroxyl groups and decomposition product II cochromatographed with r-7,c-9, c-10,t-8-tetrahydroxy-7,8,9,10-tetrahydroBaP, a (+/-)-7 beta,8 alpha-dihydroxy-9 beta,10 beta-epoxy-7,8,9,10-tetrahydroBaP (syn-BaPDE)-derived tetraol. At neutral pH [3H](+/-)-syn-BaPDE-modified calf thymus DNA formed a decomposition product identical to II. Analysis of the BaP-DNA adducts that remained covalently bound to the DNA after the above incubations demonstrated that the amounts of both major syn-BaPDE-deoxyguanosine adducts decreased with length of time of incubation. Thus, syn-BaPDE-deoxyribonucleoside adducts formed in the DNA of [3H]BaP-treated Wistar rat embryo cells are unstable and breakdown spontaneously in the absence of light to yield syn-BaPDE-tetraol decomposition products.
Development of cadmium sulfide quantum dots-polyamidoamine dendrimer thin films for detection of dengue virus E-protein antigens

M. Mahdi,Silvan Saleviter,Wing Fen Yap,Y. M. Kamil,Nur Alia Sheh Omar,J. Abdullah

Abstract:In this work, cadmium sulfide quantum dots composited with polyamidoamine (PAMAM) dendrimer (CdSQDs-PAMAM) thin film had been successfully developed for use in the detection of DENV E-proteins. The SPR results suggested that DENV E-protein can be detected in the range 0.0001 to 10 nM. The successful binding between antibodies and antigens in an immunoassay sensor was further confirmed using UV-Vis spectroscopy, by observing the red shift of absorption edge.

Chemistry,Medicine,Materials Science
Development Of Optical And Electrochemical Immunodevice For The Dengue Virus Detection

Milena Tereza Torres Couto,Alberto Galdino Silva Júnior,Karen Yasmim Pereira dos Santos Avelino,Laura Helena Vega Gonzales Gil,Marli Tenório Cordeiro,Maria D. L. Oliveira,Cesar Augusto A. S. Souza de Andrade

DOI: https://doi.org/10.1039/d4ay00514g

IF: 3.1

2024-05-08

Analytical Methods

Abstract:Dengue virus (DENV) is the most prevalent global arbovirus, exhibiting a high worldwide incidence with intensified severity of symptoms and alarming mortality rates. Faced with the limitations of diagnostic methods, an optical and electrochemical biosystem was developed for the detection of DENV genotypes 1 and 2, using cysteine (Cys), cadmium telluride (CdTe) quantum dots, and anti-DENV antibodies. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), surface plasmon resonance (SPR), atomic force microscopy (AFM), and Fourier transform infrared spectroscopy (FTIR) were employed to characterize the immunosensor. The AFM and SPR results demonstrated discernible topographic and angular changes confirming the biomolecular recognition. Different concentrations of DENV-1 and DENV-2 were evaluated (0.05×106 to 2.0×106 PFU/mL), resulting in a maximum anodic shift (∆I%) of 263.67% ± 12.54 for DENV-1 and 63.36% ± 3.68 for DENV-2. The detection strategies exhibited a linear response to the increase in viral concentration. Excellent linear correlations, with R2 values of 0.95391 for DENV-1 and 0.97773 for DENV-2, were obtained across a broad concentration range. Data analysis demonstrated high reproducibility, displaying relative standard deviation values of 3.42% and 3.62% for Cys-CdTe-AntibodyDENV-1-BSA and Cys-CdTe-AntibodyDENV-2-BSA systems. The detection limits were 0.34×106 PFU/mL and 0.02×106 PFU/mL, while the quantification limits were set at 1.49×106 PFU/mL and 0.06×106 PFU/mL for DENV-1 and DENV-2, respectively. Therefore, the biosensing apparatus demonstrates analytical effectiveness in viral screening and can be considered an innovative solution for early dengue diagnosis, contributing to global public health.

spectroscopy,chemistry, analytical,food science & technology
An Optical Sensor for Dengue Envelope Proteins Using Polyamidoamine Dendrimer Biopolymer-Based Nanocomposite Thin Film: Enhanced Sensitivity, Selectivity, and Recovery Studies

Nur Alia Sheh Omar,Yap Wing Fen,Irmawati Ramli,Amir Reza Sadrolhosseini,Jaafar Abdullah,Nor Azah Yusof,Yasmin Mustapha Kamil,Mohd Adzir Mahdi

DOI: https://doi.org/10.3390/polym13050762

IF: 5

2021-02-28

Polymers

Abstract:This paper proposes a novel idea to enhance the sensitivity and selectivity of surface plasmon resonance (SPR) optical sensor for detection of dengue virus type-2 envelope proteins (DENV-2 E-proteins) using polyamidoamine (PAMAM) dendrimer biopolymer-based nanocomposite thin film. For this purpose, two ranges of DENV-2 E-protein concentrations, i.e., 0.000008–0.0001 nM and 0.00008–0.005 nM were evaluated, and the lowest detectable concentration was achieved at 0.00008 nM. The incorporation of PAMAM dendrimer-based nanocomposite thin film with an SPR sensor exhibited a significant increase in sensitivity and binding affinity to a lower range DENV-2 E-protein concentrations. Moreover, the proposed sensor displayed good selectivity towards DENV-2 E-proteins and have an average recovery of 80–120%. The findings of this study demonstrated that PAMAM dendrimer-based nanocomposite thin film combined with SPR sensor is a promising diagnostic tool for sensitive and selective detection of DENV-2 E-proteins.

polymer science
Fully Integrated and High-Throughput Microfluidic System for Multiplexed Point-Of-Care Testing.

Peng Chen,Liqiang Wu,Xiaojun Feng,Bi-Feng Liu,Jingxuan Liu,Yiwei Li,Shunji Li,Chungen Qian,Ying Zhang,Wei Du,Jingjing Wang,Xing Wang,Chao Wan,Huijuan Yuan,Jiashuo Li,Chenxi Dai

DOI: https://doi.org/10.1002/smll.202401848

IF: 13.3

2024-06-28

Small

Abstract:For every epidemic outbreak, the prevention and treatments in resource-limited areas are always out of reach. Critical to this is that high accuracy, stability, and more comprehensive analytical techniques always rely on expensive and bulky instruments and large laboratories. Here, a fully integrated and high-throughput microfluidic system is proposed for ultra-multiple point-of-care immunoassay, termed Dac system. Specifically, the Dac system only requires a handheld portable device to automatically recycle repetitive multi-step reactions including on-demand liquid releasing, dispensing, metering, collecting, oscillatory mixing, and discharging. The Dac system performs high-precision enzyme-linked immunosorbent assays for up to 17 samples or targets simultaneously on a single chip. Furthermore, reagent consumption is only 2% compared to conventional ELISA, and microbubble-accelerated reactions shorten the assay time by more than half. As a proof of concept, the multiplexed detections are achieved by detecting at least four infection targets for two samples simultaneously on a singular chip. Furthermore, the barcode-based multi-target results can rapidly distinguish between five similar cases, allowing for accurate therapeutic interventions. Compared to bulky clinical instruments, the accuracy of clinical inflammation classification is 92.38% (n = 105), with a quantitative correlation coefficient of R2 = 0.9838, while the clinical specificity is 100% and the sensitivity is 98.93%.

Medicine,Chemistry,Engineering
Strategies in the optimization of DNA hybridization conditions and its role in electrochemical detection of dengue virus (DENV) using response surface methodology (RSM)

Jahwarhar Izuan Abdul Rashid,Nor Azah Yusof,Jaafar Abdullah,Rafidah Hanim Shomiad Shueb

DOI: https://doi.org/10.1039/d3ra00216k

2023-06-16

Abstract:In recent years, limited research has been conducted on enhancing DNA hybridization-based biosensor approaches using statistical models. This study explores the application of response surface methodology (RSM) to improve the performance of a DNA hybridization biosensor for dengue virus (DENV) detection. The biosensor is based on silicon nanowires decorated with gold nanoparticles (SiNWs/AuNPs) and utilizes methylene blue as a redox indicator. The DNA hybridization process between the immobilized DNA probe and the target DENV gene was monitored using differential pulse voltammetry (DPV) based on the reduction of methylene blue. Fourier-transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were employed to confirm successful DNA hybridization events on the modified screen-printed gold electrode (SPGE) surface. Several parameters, including pH buffer, NaCl concentration, temperature, and hybridization time, were simultaneously optimized, with NaCl concentration having the most significant impact on DNA hybridization events. This study enhances the understanding of the role of each parameter in influencing DNA hybridization detection in electrochemical biosensors. The optimized biosensor demonstrated the ability to detect complementary oligonucleotide and amplified DENV gene concentrations as low as 0.0891 ng µL-1 (10 pM) and 2.8 ng µL-1, respectively. The developed biosensor shows promise for rapid clinical diagnosis of dengue virus infection.

A comparison ofl-asparaginase fromErwinia aroideae and fromEscherichia coli: Biochemical and biological properties

Practice Prize Paper - Incorporating Emotions into Evaluation and Choice Models: Application to Kmart Australia

Serotype-specific detection of dengue viruses in a nonstructural protein 1-based enzyme-linked immunosorbent assay validated with a multi-national cohort

Design and Assessment of a Surface Plasmon Resonance Biosensor for Recognition of Dengue Infected Plasma, Platelets, and Hemoglobin Cells

A facile microfluidic chip design for DNA detection using dengue serotypes as a proof-of-concept case study

Enhancement of Convection and Molecular Transport into Film Stacked Structures by Introduction of Notch Shape for Micro-Immunoassay

Sliding-strip microfluidic device enables ELISA on paper

Portable Paper-Based Immunoassay Combined with Smartphone Application for Colorimetric and Quantitative Detection of Dengue NS1 Antigen

Site-specific imprinting of dengue virus non-structural 1 antigen on a polydopamine-based sensing film for early detection and prognosis of dengue

Highly sensitive detection of dengue biomarker using streptavidin-conjugated quantum dots

General formulation of pressure and stress tensor for arbitrary many-body interaction potentials under periodic boundary conditions.

Synthesis of Isolated DNA Aptamer and Its Application of AC-Electrothermal Flow-Based Rapid Biosensor for the Detection of Dengue Virus in a Spiked Sample

Development of a highly sensitive magneto-enzyme lateral flow immunoassay for dengue NS1 detection

A Sandwich Electrochemical Immunosensor Based on Antibody Functionalized-Silver Nanoparticles (Ab-Ag NPs) for the Detection of Dengue Biomarker Protein NS1

Development of a rapid assay system for detecting antibody-dependent enhancement of dengue virus infection

Instability of (+/-)-7 beta,8 alpha-dihydroxy-9 beta,10 beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (syn-BaPDE)-DNA adducts formed in benzo[a]pyrene-treated Wistar rat embryo cell cultures.

Development of cadmium sulfide quantum dots-polyamidoamine dendrimer thin films for detection of dengue virus E-protein antigens

Development Of Optical And Electrochemical Immunodevice For The Dengue Virus Detection

An Optical Sensor for Dengue Envelope Proteins Using Polyamidoamine Dendrimer Biopolymer-Based Nanocomposite Thin Film: Enhanced Sensitivity, Selectivity, and Recovery Studies

Fully Integrated and High-Throughput Microfluidic System for Multiplexed Point-Of-Care Testing.

Strategies in the optimization of DNA hybridization conditions and its role in electrochemical detection of dengue virus (DENV) using response surface methodology (RSM)