Abstract:The use of catalytic membranes as microstructured reactors without a separative function has proved effective. High catalytic activity is possible with minimal mass transport resistances if the reactant mixture is pushed to flow through the pores of a membrane that has been impregnated with catalyst. In this study, n-heptane (C7H16) was hydrocracked and hydro-isomerized within a plug-flow zeolitic catalytic membrane-packed bed reactor. The metallic cobalt (Co) precursor at 3 wt.% was loaded onto support mesoporous materials MCM-48 to synthesize heterogeneous catalysis. The prepared MCM-48 was characterized by utilizing characterization techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR), nitrogen adsorption–desorption isotherms, and the Brunauer–Emmett–Teller (BET) surface area. The structural and textural characteristics of MCM-48 after encapsulation with Co were also investigated. The analyses were performed before and after metal loading. According to the results, the 3 wt.% Co/MCM-48 of metallic catalyst in a fixed bed membrane reactor (MR) appears to have an excellent catalytic activity of ~83% during converting C7H16 at 400 °C, whereas a maximum selectivity was approximately ~65% at 325 °C. According to our findings, the synthesized catalyst exhibits an acceptable selectivity to isomers with multiple branches, while making low aromatic components. In addition, a good catalytic stability was noticed for this catalyst over the reaction. Use of 3 wt.% Co/MCM-48 catalyst led to the highest isomerization selectivity as well as n-heptane conversion. Therefore, the heterogeneous catalysis MCM-48 is a promising option/ alternative for traditional hydrocracking and hydro-isomerization processes.

Comparison of cracking activity of the core-shell composite MCM-41/HY & MCM-48/HY catalysts in the synthesis of organic liquid fuel from Mahua oil

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

ZSM-5@MCM-41 core–shell composite with tunable shell thickness for n -heptane catalytic cracking reaction

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

Core-shell-structured Composite ZSM-5@MCM-41 Catalysts: Fabrication, Characterization, and Enhanced Performance in Hexane Catalytic Cracking

Jet Fuel Range Hydrocarbons Production Through Competitive Pathways of Hydrocracking and Isomerization over HPW-Ni/MCM-41 Catalyst

Preparation of Mesoporous Silica-Supported Palladium Catalysts for Biofuel Upgrade

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Design and Synthesis of Core Shells HZSM-5@MCM-41 with Variable Acidity and Mesoporosity for Lignin-Catalyzed Fast Pyrolysis to Prepare Aromatics

Conversion of Palmitic Acid to Jet Fuel Components over Mo/H-ZSM-22 Bi-Functional Catalysts with High Carbon Reservation

Hydrodeoxygenation and hydrocracking to produce jet biofuel catalyzed by mesoporous zeolite desilicated with NaOH treatment

Fabrication and Characterization of ZSM‐5@Silicalite‐1 Core‐shell Composites and Their Application in Hexane Catalytic Cracking

Bifunctional CaCO3/HY Catalyst in the Simultaneous Cracking-Deoxygenation of Palm Oil to Diesel-Range Hydrocarbons

Production of MAH-Rich Bio-Oil from Co-Pyrolysis of Biomass and Plastics Using Carbonized MOF Catalysts under Microwave Irradiation

Bio-MCM-41: a high-performance catalyst support derived from pyrolytic biochar

Utilization of Loaded Cobalt onto MCM-48 Mesoporous Catalyst as a Heterogeneous Reaction in a Fixed Bed Membrane Reactor to Produce Isomerization Product from n-Heptane

Catalytic Co-Cracking of Used Cooking Oil Methyl Ester and Polystyrene Waste for Gasoline-Rich Biofuel Over Mesoporous Al-MCM-41 Catalyst

Hydroconversion of Jatropha Oil to Alternative Fuel over Hierarchical ZSM-5

Study on Preparation of Fuel Oil from Three Kinds of Molecular Sieve Catalytic Cracking Waste Lubricating Oil

H Beta Modified Co/Sio2 Catalysts for Fischer-Tropsch Synthesis of Jet Fuel-Range Hydrocarbons

Preparation of Core-Shell Composite of Y@Mesoporous Alumina and Its Application in Heavy Oil Cracking