Selective hydrocracking of poly-aromatics to mono-aromatics in a catalyst grading system of NiMo/Al 2 O 3 -HY and NiMo/Beta

Lin Qi,Chong Peng,Zhenmin Cheng,Zhiming Zhou
DOI: https://doi.org/10.1016/j.fuel.2023.128941
IF: 7.4
2023-06-11
Fuel
Abstract:Selective hydrocracking of poly-aromatic hydrocarbons (PAHs) to mono-aromatic hydrocarbons (MAHs) over zeolite-supported non-noble metal catalysts is an effective way to upgrade light cycle oil (LCO). However, it is still a challenge to increase the yield of MAHs. Herein, we report that a catalyst grading system consisting of NiMo/A 30 Y 50 (upper catalyst layer) and NiMo/Beta(25) (lower catalyst layer) can efficiently convert 1-methylnaphthalene (1-MN, representative of PAHs in LCO) into MAHs. Experimental and characterization studies reveal that NiMo/Beta(25) can facilitate the conversion of intermediates of 1-MN hydrocracking (mainly methyl tetralins and indanes) into MAHs, mainly due to its good textural property, high Brønsted acidity and high MoS 2 dispersion. Under the experimental condition of 400 °C, 6 MPa, H 2 /1-MN molar ratio = 6 and weight hourly space velocity of 1-MN (WHSV) = 1 h −1 , the NiMo/A 30 Y 50 – NiMo/Beta(25) catalyst grading system can realize 99.9% conversion of 1-MN and 63.8% selectivity of MAHs, which outperforms the performance of most catalysts reported in the literature. Moreover, even if the presence of NH 3 in the reaction system, this catalyst grading system can give rise to 98.3% conversion of 1-MN and 52.7% selectivity of MAHs at 420 °C, 6 MPa, H 2 /1-MN molar ratio = 6 and WHSV = 1 h −1 . The findings of this study offer new opportunities for the valorization of LCO.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?