Abstract:Descaling roll is a key component used to remove iron oxide on billet surface in hot rolling production lines, and its surface properties have a significant effect on the quality of hot rolling products. The descaling roll is in bad service condition and subjected to the dynamic impact caused by high-pressure water erosion and high temperature billet descaling process for a long time. Under the action of high temperature, strong wear, multi-cycle heat, force, flow and multi-field strong coupling, the surface is prone to wear and corrosion failure, which affects the continuous rolling production. Submerged arc welding provides an effective way to repair and strengthen the descaling roll surface. The content of WC hard phase has a significant effect on welding quality. At the same time, direct submerged arc welding of Ni based WC wire on the descaling roll surface is easy to cause cracks, and a gradient synergistic strengthening effect can be formed by setting the transition bottom layer in welding. At present, there is a lack of experiments related to the preparation of flux-cored wire with different contents and the overlaying for the bottom submerged arc welding. Relevant studies are urgently needed to further reveal the welding process mechanism to provide significant theoretical support for the preparation of wire materials and the improvement of welding quality. In this paper, 30% and 60% WC flux-cored wires were prepared by employing Ni-Cr-B-Si alloy powder as the base powder, and submerged arc welding tests were conducted on the descaling roll, preparing three welding layers, namely 70% NiCrBSi + 30% WC without the bottom layer, 70% NiCrBSi + 30% WC with the bottom layer, and 40% NiCrBSi + 60% WC with the bottom layer. The properties of the welding layer were evaluated by SEM, XRD, EDS, hardness, friction and wear, corrosion and impact experiments. The results show that the WC hard phase added in the filler metal has dissolved and formed a new phase with other elements in the melting pool. The surfacing layer mainly contains Fe-Ni, Cr-C, Fe3Si, Ni3C and other phases. The surfacing layer prepared by a different amount of WC flux-cored wire and the surfacing layer with or without the bottom layer have great differences in microstructure and properties. This study lays a significant theoretical foundation for optimizing the submerged arc welding process and preparing welding materials for the descaling roll and has significant practical significance and application value.

Weld Chemistry and Microhardness Studies of Formulated SrO-CaF2-CaO- SiO2 Silica Based SMAW Electrode with Nickel Wire

Microhardness and element transfer investigation of weld bead using formulated [math] SMAW electrode coatings

Predictive Modeling of Wettability Characteristics in Developed Shielded Metal Arc Welding Electrode Coating Fluxes: A Regression and Artificial Neural Network Approach

Wettability studies of formulated SMAW electrode coating fluxes with regression analysis and neural network approach

Weld Metal Chemistry of Mineral Waste Added SiO2–CaO–CaF2–TiO2 Electrode Coatings for Offshore Welds

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

Influence of SAW Flux Ingredients on Chemical Compositions of Weldments of Duplex Steel-2205

Study of weld bead chemical, microhardness & microstructural analysis using submerged arc welding fluxes for linepipe steel applications

Thermal property characterization and modeling of SMAW electrode coating flux using ANN and regression analysis

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Experimental Study on the Process of Submerged Arc Welding for Nickel-Based WC Flux-Cored Wire on Descaling Roll

Melting Behavior of a CaO–SiO2–Al2O3 Flux with Varying MnO Concentration for Use in Fusion Welding of Low‐Carbon Steel

Microstructural Evolution During Welding of High Si Solution-Strengthened Ferritic Ductile Cast Iron Using Different Filler Metals

Solidification cracking susceptibility and carbide evolution behavior in ERNiMo-2 weld metal: Effect and mechanism of Si content

In Situ Modification of CaF2-SiO2-Al2O3-MgO Flux Applied in the Aluminium-Assisted Transfer of Titanium in the Submerged Arc Welding of Carbon Steel: Process Mineralogy and Thermochemical Analysis

Effects of Oxide Powders as Activating Flux on AMIG 304L Welds

Investigation of microstructure and mechanical properties in dissimilar-metal welding between ferritic stainless steel and Co-based superalloy using electron beam welding

Investigation of the Alloying Elements' Effect in the Flux-Cored Wire and Submerged Arc Welding Flux Combination.

Improvement of microstructure and hardness property of MMA welded ADI workpiece using newly developed electrode

AnaIysis of SiC Reinforced NickeI-based Wear-resistant Coating Design and Performance

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy